Merge pull request #108340 from cherylmc/p2svwan1

format update

Author: PRMerger10

articles/virtual-wan/connect-virtual-network-gateway-vwan.md

@@ -1,11 +1,11 @@
 ---
-title: 'Connect a virtual network gateway to an Azure Virtual WAN | Microsoft Docs'
+title: 'Connect a virtual network gateway to an Azure Virtual WAN'
 description: This article helps you connect an Azure virtual network gateway to an Azure Virtual WAN VPN gateway
 services: virtual-wan
 author: cherylmc
 ms.service: virtual-wan
 ms.topic: conceptual
-ms.date: 11/04/2019
+ms.date: 03/19/2020
 ms.author: cherylmc
 
 ---
@@ -68,7 +68,7 @@ To create Virtual WAN VPN sites, navigate your to your virtual WAN and, under **
    * **IP Address** - Enter IP address (same as the first public IP address shown under the (VPN Gateway) virtual network gateway properties)
    * **BGP Address** and **ASN** - BGP address and ASN. These must be the same as one of the BGP peer IP addresses, and ASN from the VPN Gateway virtual network gateway that you configured in [Step 1](#vnetgw).
 4. Review and select **Confirm** to create the site.
-5. Repeat the previous steps to create the second site to match with the second instance of the VPN Gateway virtual network gateway. You’ll keep the same settings, except using second public IP address and second BGP peer IP address from VPN Gateway configuration.
+5. Repeat the previous steps to create the second site to match with the second instance of the VPN Gateway virtual network gateway. You'll keep the same settings, except using second public IP address and second BGP peer IP address from VPN Gateway configuration.
 6. You now have two sites successfully provisioned and can proceed to the next section to download configuration files.
 
 ## <a name="downloadconfig"></a>3. Download the VPN configuration files

articles/virtual-wan/openvpn-azure-ad-tenant.md

@@ -1,21 +1,22 @@
 ---
-title: 'VPN Gateway: Azure AD tenant for P2S VPN connections: Azure AD authentication'
-description: You can use P2S VPN to connect to your VNet using Azure AD authentication
+title: 'Azure AD tenant for User VPN connections: Azure AD authentication'
+description: You can use Azure Virtual WAN User VPN (point-to-site) to connect to your VNet using Azure AD authentication
+titleSuffix: Azure Virtual WAN
 services: virtual-wan
 author: anzaman
 
 ms.service: virtual-wan
 ms.topic: conceptual
-ms.date: 12/27/2019
+ms.date: 03/19/2020
 ms.author: alzam
 
 ---
-# Create an Azure Active Directory tenant for P2S OpenVPN protocol connections
+# Create an Azure Active Directory tenant for User VPN OpenVPN protocol connections
 
-When connecting to your VNet, you can use certificate-based authentication or RADIUS authentication. However, when you use the Open VPN protocol, you can also use Azure Active Directory authentication. This article helps you set up an Azure AD tenant for P2S Open VPN authentication.
+When connecting to your VNet, you can use certificate-based authentication or RADIUS authentication. However, when you use the Open VPN protocol, you can also use Azure Active Directory authentication. This article helps you set up an Azure AD tenant for Virtual WAN User VPN (point-to-site) Open VPN authentication.
 
 > [!NOTE]
-> Azure AD authentication is supported only for OpenVPN® protocol connections.
+> Azure AD authentication is supported only for OpenVPN® protocol connections.
 >
 
 ## <a name="tenant"></a>1. Create the Azure AD tenant