Add image

Author: timlt

articles/iot-develop/media/quickstart-devkit-stm-b-u585i-iot-hub/stm-b-u585i.png

@@ -211,11 +211,11 @@ To connect the STM DevKit to Azure, you modify a configuration file for Wi-Fi an
 
 ### Flash the image
 
-1. On the STM DevKit MCU, locate the **Reset** button (1), the Micro USB port (2), which is labeled **USB STLink**, and the board part number (3). You'll refer to these items in the next steps. All of them are highlighted in the following picture:
+1. On the STM DevKit MCU, locate the Micro USB port (1), and the black **Reset** button (2). You'll refer to these items in the next steps. All of them are highlighted in the following picture:
 
     :::image type="content" source="media/quickstart-devkit-stm-b-u585i-iot-hub/stm-b-u585i.png" alt-text="Photo that that shows key components on the STM DevKit board.":::
 
-1. Connect the Micro USB cable to the **USB STLINK** port on the STM DevKit, and then connect it to your computer.
+1. Connect the Micro USB cable to the Micro USB port on the STM DevKit, and then connect it to your computer.
 
     > [!NOTE]
     > For detailed setup information about the STM DevKit, see the instructions on the packaging, or see [B-U585I-IOT02A Documentation](https://www.st.com/en/evaluation-tools/b-u585i-iot02a.html#documentation).