adding VaultID parameter

Author: pvrk

articles/backup/backup-azure-vms-automation.md

@@ -171,7 +171,7 @@ When you create a Recovery Services vault, it comes with default protection and
 Use **[Get-AzRecoveryServicesBackupProtectionPolicy](https://docs.microsoft.com/powershell/module/az.recoveryservices/get-azrecoveryservicesbackupprotectionpolicy)** to view the protection policies available in the vault. You can use this cmdlet to get a specific policy, or to view the policies associated with a workload type. The following example gets policies for workload type, AzureVM.
 
 ```powershell
-Get-AzRecoveryServicesBackupProtectionPolicy -WorkloadType "AzureVM"
+Get-AzRecoveryServicesBackupProtectionPolicy -WorkloadType "AzureVM" -VaultId $targetVault.ID
 ```
 
 The output is similar to the following example:
@@ -197,7 +197,7 @@ A backup protection policy is associated with at least one retention policy. A r
 By default, a start time is defined in the Schedule Policy Object. Use the following example to change the start time to the desired start time. The desired start time should be in UTC as well. The below example assumes the desired start time is 01:00 AM UTC for daily backups.
 
 ```powershell
-$schPol = Get-AzRecoveryServicesBackupSchedulePolicyObject -WorkloadType "AzureVM"
+$schPol = Get-AzRecoveryServicesBackupSchedulePolicyObject -WorkloadType "AzureVM" -VaultId $targetVault.ID
 $UtcTime = Get-Date -Date "2019-03-20 01:00:00Z"
 $UtcTime = $UtcTime.ToUniversalTime()
 $schpol.ScheduleRunTimes[0] = $UtcTime
@@ -209,8 +209,8 @@ $schpol.ScheduleRunTimes[0] = $UtcTime
 The following example stores the schedule policy and the retention policy in variables. The example uses those variables to define the parameters when creating a protection policy, *NewPolicy*.
 
 ```powershell
-$retPol = Get-AzRecoveryServicesBackupRetentionPolicyObject -WorkloadType "AzureVM"
-New-AzRecoveryServicesBackupProtectionPolicy -Name "NewPolicy" -WorkloadType "AzureVM" -RetentionPolicy $retPol -SchedulePolicy $schPol
+$retPol = Get-AzRecoveryServicesBackupRetentionPolicyObject -WorkloadType "AzureVM" -VaultId $targetVault.ID
+New-AzRecoveryServicesBackupProtectionPolicy -Name "NewPolicy" -WorkloadType "AzureVM" -RetentionPolicy $retPol -SchedulePolicy $schPol -VaultId $targetVault.ID
 ```
 
 The output is similar to the following example:
@@ -233,24 +233,24 @@ The following examples enable protection for the item, V2VM, using the policy, N
 To enable the protection on **non-encrypted Resource Manager VMs**:
 
 ```powershell
-$pol = Get-AzRecoveryServicesBackupProtectionPolicy -Name "NewPolicy"
-Enable-AzRecoveryServicesBackupProtection -Policy $pol -Name "V2VM" -ResourceGroupName "RGName1"
+$pol = Get-AzRecoveryServicesBackupProtectionPolicy -Name "NewPolicy" -VaultId $targetVault.ID
+Enable-AzRecoveryServicesBackupProtection -Policy $pol -Name "V2VM" -ResourceGroupName "RGName1" -VaultId $targetVault.ID
 ```
 
 To enable the protection on encrypted VMs (encrypted using BEK and KEK), you must give the Azure Backup service permission to read keys and secrets from the key vault.
 
 ```powershell
 Set-AzKeyVaultAccessPolicy -VaultName "KeyVaultName" -ResourceGroupName "RGNameOfKeyVault" -PermissionsToKeys backup,get,list -PermissionsToSecrets get,list -ServicePrincipalName 262044b1-e2ce-469f-a196-69ab7ada62d3
-$pol = Get-AzRecoveryServicesBackupProtectionPolicy -Name "NewPolicy"
-Enable-AzRecoveryServicesBackupProtection -Policy $pol -Name "V2VM" -ResourceGroupName "RGName1"
+$pol = Get-AzRecoveryServicesBackupProtectionPolicy -Name "NewPolicy" -VaultId $targetVault.ID
+Enable-AzRecoveryServicesBackupProtection -Policy $pol -Name "V2VM" -ResourceGroupName "RGName1" -VaultId $targetVault.ID
 ```
 
 To enable the protection on **encrypted VMs (encrypted using BEK only)**, you must give the Azure Backup service permission to read secrets from the key vault.
 
 ```powershell
 Set-AzKeyVaultAccessPolicy -VaultName "KeyVaultName" -ResourceGroupName "RGNameOfKeyVault" -PermissionsToSecrets backup,get,list -ServicePrincipalName 262044b1-e2ce-469f-a196-69ab7ada62d3
-$pol = Get-AzRecoveryServicesBackupProtectionPolicy -Name "NewPolicy"
-Enable-AzRecoveryServicesBackupProtection -Policy $pol -Name "V2VM" -ResourceGroupName "RGName1"
+$pol = Get-AzRecoveryServicesBackupProtectionPolicy -Name "NewPolicy" -VaultId $targetVault.ID
+Enable-AzRecoveryServicesBackupProtection -Policy $pol -Name "V2VM" -ResourceGroupName "RGName1" -VaultId $targetVault.ID
 ```
 
 > [!NOTE]
@@ -262,7 +262,7 @@ Enable-AzRecoveryServicesBackupProtection -Policy $pol -Name "V2VM" -ResourceGro
 You can monitor long-running operations, such as backup jobs, without using the Azure portal. To get the status of an in-progress job, use the [Get-AzRecoveryservicesBackupJob](https://docs.microsoft.com/powershell/module/az.recoveryservices/get-azrecoveryservicesbackupjob) cmdlet. This cmdlet gets the backup jobs for a specific vault, and that vault is specified in the vault context. The following example gets the status of an in-progress job as an array, and stores the status in the $joblist variable.
 
 ```powershell
-$joblist = Get-AzRecoveryservicesBackupJob –Status "InProgress"
+$joblist = Get-AzRecoveryservicesBackupJob –Status "InProgress" -VaultId $targetVault.ID
 $joblist[0]
 ```
 
@@ -277,7 +277,7 @@ V2VM             Backup               InProgress            4/23/2016
 Instead of polling these jobs for completion - which is unnecessary additional code - use the [Wait-AzRecoveryServicesBackupJob](https://docs.microsoft.com/powershell/module/az.recoveryservices/wait-azrecoveryservicesbackupjob) cmdlet. This cmdlet pauses the execution until either the job completes or the specified timeout value is reached.
 
 ```powershell
-Wait-AzRecoveryServicesBackupJob -Job $joblist[0] -Timeout 43200
+Wait-AzRecoveryServicesBackupJob -Job $joblist[0] -Timeout 43200 -VaultId $targetVault.ID
 ```
 
 ## Manage Azure VM backups
@@ -295,8 +295,8 @@ $SchPol = Get-AzRecoveryServicesBackupSchedulePolicyObject -WorkloadType "AzureV
 $UtcTime = Get-Date -Date "2019-03-20 01:00:00Z" (This is the time that the customer wants to start the backup)
 $UtcTime = $UtcTime.ToUniversalTime()
 $SchPol.ScheduleRunTimes[0] = $UtcTime
-$pol = Get-AzRecoveryServicesBackupProtectionPolicy -Name "NewPolicy"
-Set-AzRecoveryServicesBackupProtectionPolicy -Policy $pol  -SchedulePolicy $SchPol
+$pol = Get-AzRecoveryServicesBackupProtectionPolicy -Name "NewPolicy" -VaultId $targetVault.ID
+Set-AzRecoveryServicesBackupProtectionPolicy -Policy $pol  -SchedulePolicy $SchPol -VaultId $targetVault.ID
 ````
 
 #### Modifying retention
@@ -306,8 +306,8 @@ The following example changes the recovery point retention to 365 days.
 ```powershell
 $retPol = Get-AzRecoveryServicesBackupRetentionPolicyObject -WorkloadType "AzureVM"
 $retPol.DailySchedule.DurationCountInDays = 365
-$pol = Get-AzRecoveryServicesBackupProtectionPolicy -Name "NewPolicy"
-Set-AzRecoveryServicesBackupProtectionPolicy -Policy $pol  -RetentionPolicy $RetPol
+$pol = Get-AzRecoveryServicesBackupProtectionPolicy -Name "NewPolicy" -VaultId $targetVault.ID
+Set-AzRecoveryServicesBackupProtectionPolicy -Policy $pol  -RetentionPolicy $RetPol -VaultId $targetVault.ID
 ```
 
 #### Configuring Instant restore snapshot retention
@@ -316,9 +316,9 @@ Set-AzRecoveryServicesBackupProtectionPolicy -Policy $pol  -RetentionPolicy $Ret
 > From Az PS version 1.6.0 onwards, one can update the instant restore snapshot retention period in policy using Powershell
 
 ````powershell
-$bkpPol = Get-AzureRmRecoveryServicesBackupProtectionPolicy -WorkloadType "AzureVM"
+$bkpPol = Get-AzureRmRecoveryServicesBackupProtectionPolicy -WorkloadType "AzureVM" -VaultId $targetVault.ID
 $bkpPol.SnapshotRetentionInDays=7
-Set-AzureRmRecoveryServicesBackupProtectionPolicy -policy $bkpPol
+Set-AzureRmRecoveryServicesBackupProtectionPolicy -policy $bkpPol -VaultId $targetVault.ID
 ````
 
 The default value will be 2, user can set the value with a min of 1 and max of 5. For weekly backup policies, the period is set to 5 and cannot be changed.
@@ -328,8 +328,8 @@ The default value will be 2, user can set the value with a min of 1 and max of 5
 Use [Backup-AzRecoveryServicesBackupItem](https://docs.microsoft.com/powershell/module/az.recoveryservices/backup-azrecoveryservicesbackupitem) to trigger a backup job. If it's the initial backup, it is a full backup. Subsequent backups take an incremental copy. The following example takes a VM backup to be retained for 60 days.
 
 ```powershell
-$namedContainer = Get-AzRecoveryServicesBackupContainer -ContainerType "AzureVM" -Status "Registered" -FriendlyName "V2VM"
-$item = Get-AzRecoveryServicesBackupItem -Container $namedContainer -WorkloadType "AzureVM"
+$namedContainer = Get-AzRecoveryServicesBackupContainer -ContainerType "AzureVM" -Status "Registered" -FriendlyName "V2VM" -VaultId $targetVault.ID
+$item = Get-AzRecoveryServicesBackupItem -Container $namedContainer -WorkloadType "AzureVM" -VaultId $targetVault.ID
 $endDate = (Get-Date).AddDays(60).ToUniversalTime()
 $job = Backup-AzRecoveryServicesBackupItem -Item $item -VaultId $targetVault.ID -ExpiryDateTimeUTC $endDate
 ```
@@ -352,9 +352,9 @@ V2VM              Backup              InProgress          4/23/2016
 User can either modify existing policy or change the policy of the backed-up item from Policy1 to Policy2. To switch policies for a backed-up item, fetch the relevant policy and back up item and use the [Enable-AzRecoveryServices](https://docs.microsoft.com/powershell/module/az.recoveryservices/Enable-AzRecoveryServicesBackupProtection?view=azps-1.5.0) command with backup item as the parameter.
 
 ````powershell
-$TargetPol1 = Get-AzRecoveryServicesBackupProtectionPolicy -Name <PolicyName>
-$anotherBkpItem = Get-AzRecoveryServicesBackupItem -WorkloadType AzureVM -BackupManagementType AzureVM -Name "<BackupItemName>"
-Enable-AzRecoveryServicesBackupProtection -Item $anotherBkpItem -Policy $TargetPol1
+$TargetPol1 = Get-AzRecoveryServicesBackupProtectionPolicy -Name <PolicyName> -VaultId $targetVault.ID
+$anotherBkpItem = Get-AzRecoveryServicesBackupItem -WorkloadType AzureVM -BackupManagementType AzureVM -Name "<BackupItemName>" -VaultId $targetVault.ID
+Enable-AzRecoveryServicesBackupProtection -Item $anotherBkpItem -Policy $TargetPol1 -VaultId $targetVault.ID
 ````
 
 The command waits until the configure backup is completed and returns the following output.
@@ -411,8 +411,8 @@ The basic steps to restore an Azure VM are:
 To get the PowerShell object that identifies the right backup item, start from the container in the vault, and work your way down the object hierarchy. To select the container that represents the VM, use the [Get-AzRecoveryServicesBackupContainer](https://docs.microsoft.com/powershell/module/az.recoveryservices/get-azrecoveryservicesbackupcontainer) cmdlet and pipe that to the [Get-AzRecoveryServicesBackupItem](https://docs.microsoft.com/powershell/module/az.recoveryservices/get-azrecoveryservicesbackupitem) cmdlet.
 
 ```powershell
-$namedContainer = Get-AzRecoveryServicesBackupContainer  -ContainerType "AzureVM" -Status "Registered" -FriendlyName "V2VM"
-$backupitem = Get-AzRecoveryServicesBackupItem -Container $namedContainer  -WorkloadType "AzureVM"
+$namedContainer = Get-AzRecoveryServicesBackupContainer  -ContainerType "AzureVM" -Status "Registered" -FriendlyName "V2VM" -VaultId $targetVault.ID
+$backupitem = Get-AzRecoveryServicesBackupItem -Container $namedContainer  -WorkloadType "AzureVM" -VaultId $targetVault.ID
 ```
 
 ### Choose a recovery point
@@ -424,7 +424,7 @@ In the following script, the variable, **$rp**, is an array of recovery points f
 ```powershell
 $startDate = (Get-Date).AddDays(-7)
 $endDate = Get-Date
-$rp = Get-AzRecoveryServicesBackupRecoveryPoint -Item $backupitem -StartDate $startdate.ToUniversalTime() -EndDate $enddate.ToUniversalTime()
+$rp = Get-AzRecoveryServicesBackupRecoveryPoint -Item $backupitem -StartDate $startdate.ToUniversalTime() -EndDate $enddate.ToUniversalTime() -VaultId $targetVault.ID
 $rp[0]
 ```
 
@@ -451,7 +451,7 @@ Use the [Restore-AzRecoveryServicesBackupItem](https://docs.microsoft.com/powers
 To restore the disks and configuration information:
 
 ```powershell
-$restorejob = Restore-AzRecoveryServicesBackupItem -RecoveryPoint $rp[0] -StorageAccountName "DestAccount" -StorageAccountResourceGroupName "DestRG"
+$restorejob = Restore-AzRecoveryServicesBackupItem -RecoveryPoint $rp[0] -StorageAccountName "DestAccount" -StorageAccountResourceGroupName "DestRG" -VaultId $targetVault.ID
 $restorejob
 ```
 
@@ -471,7 +471,7 @@ Provide an additional parameter **TargetResourceGroupName** to specify the RG to
 
 
 ```powershell
-$restorejob = Restore-AzRecoveryServicesBackupItem -RecoveryPoint $rp[0] -StorageAccountName "DestAccount" -StorageAccountResourceGroupName "DestRG" -TargetResourceGroupName "DestRGforManagedDisks"
+$restorejob = Restore-AzRecoveryServicesBackupItem -RecoveryPoint $rp[0] -StorageAccountName "DestAccount" -StorageAccountResourceGroupName "DestRG" -TargetResourceGroupName "DestRGforManagedDisks" -VaultId $targetVault.ID
 ```
 
 The **VMConfig.JSON** file will be restored to the storage account and the managed disks will be restored to the specified target RG.
@@ -493,8 +493,8 @@ Wait-AzRecoveryServicesBackupJob -Job $restorejob -Timeout 43200
 Once the Restore job has completed, use the [Get-AzRecoveryServicesBackupJobDetails](https://docs.microsoft.com/powershell/module/az.recoveryservices/wait-azrecoveryservicesbackupjob) cmdlet to get the details of the restore operation. The JobDetails property has the information needed to rebuild the VM.
 
 ```powershell
-$restorejob = Get-AzRecoveryServicesBackupJob -Job $restorejob
-$details = Get-AzRecoveryServicesBackupJobDetails -Job $restorejob
+$restorejob = Get-AzRecoveryServicesBackupJob -Job $restorejob -VaultId $targetVault.ID
+$details = Get-AzRecoveryServicesBackupJobDetails -Job $restorejob -VaultId $targetVault.ID
 ```
 
 Once you restore the disks, go to the next section to create the VM.
@@ -764,8 +764,8 @@ The basic steps to restore a file from an Azure VM backup are:
 To get the PowerShell object that identifies the right backup item, start from the container in the vault, and work your way down the object hierarchy. To select the container that represents the VM, use the [Get-AzRecoveryServicesBackupContainer](https://docs.microsoft.com/powershell/module/az.recoveryservices/get-azrecoveryservicesbackupcontainer) cmdlet and pipe that to the [Get-AzRecoveryServicesBackupItem](https://docs.microsoft.com/powershell/module/az.recoveryservices/get-azrecoveryservicesbackupitem) cmdlet.
 
 ```powershell
-$namedContainer = Get-AzRecoveryServicesBackupContainer  -ContainerType "AzureVM" -Status "Registered" -FriendlyName "V2VM"
-$backupitem = Get-AzRecoveryServicesBackupItem -Container $namedContainer  -WorkloadType "AzureVM"
+$namedContainer = Get-AzRecoveryServicesBackupContainer  -ContainerType "AzureVM" -Status "Registered" -FriendlyName "V2VM" -VaultId $targetVault.ID
+$backupitem = Get-AzRecoveryServicesBackupItem -Container $namedContainer  -WorkloadType "AzureVM" -VaultId $targetVault.ID
 ```
 
 ### Choose a recovery point
@@ -777,7 +777,7 @@ In the following script, the variable, **$rp**, is an array of recovery points f
 ```powershell
 $startDate = (Get-Date).AddDays(-7)
 $endDate = Get-Date
-$rp = Get-AzRecoveryServicesBackupRecoveryPoint -Item $backupitem -StartDate $startdate.ToUniversalTime() -EndDate $enddate.ToUniversalTime()
+$rp = Get-AzRecoveryServicesBackupRecoveryPoint -Item $backupitem -StartDate $startdate.ToUniversalTime() -EndDate $enddate.ToUniversalTime() -VaultId $targetVault.ID
 $rp[0]
 ```
 
@@ -807,7 +807,7 @@ Use the [Get-AzRecoveryServicesBackupRPMountScript](https://docs.microsoft.com/p
 >
 
 ```powershell
-Get-AzRecoveryServicesBackupRPMountScript -RecoveryPoint $rp[0]
+Get-AzRecoveryServicesBackupRPMountScript -RecoveryPoint $rp[0] -VaultId $targetVault.ID
 ```
 
 The output is similar to the following example:
@@ -825,7 +825,7 @@ Run the script on the machine where you want to recover the files. To execute th
 After the required files are copied, use [Disable-AzRecoveryServicesBackupRPMountScript](https://docs.microsoft.com/powershell/module/az.recoveryservices/disable-azrecoveryservicesbackuprpmountscript) to unmount the disks. Be sure to unmount the disks so access to the files of the recovery point is removed.
 
 ```powershell
-Disable-AzRecoveryServicesBackupRPMountScript -RecoveryPoint $rp[0]
+Disable-AzRecoveryServicesBackupRPMountScript -RecoveryPoint $rp[0] -VaultId $targetVault.ID
 ```
 
 ## Next steps