Updated network configuration guidance

Author: LouisBerner

articles/databox-online/azure-stack-edge-gpu-deploy-configure-network-compute-web-proxy.md

@@ -7,7 +7,7 @@ author: alkohli
 ms.service: databox
 ms.subservice: edge
 ms.topic: tutorial
-ms.date: 07/17/2023
+ms.date: 07/19/2023
 ms.author: alkohli
 zone_pivot_groups: azure-stack-edge-device-deployment
 # Customer intent: As an IT admin, I need to understand how to connect and activate Azure Stack Edge Pro so I can use it to transfer data to Azure. 
@@ -144,7 +144,7 @@ Follow these steps to add or delete virtual switches and virtual networks.
     1. Choose the network interface on which the virtual switch should be created. 
     1. Select **Apply**. You can see that the specified virtual switch is created.
 
-       You can create Virtual Machines from Azure portal using any of the Virtual Networks you have created.
+       You can create Virtual Machines from Azure portal using any of the virtual networks you have created.
 
     ![Screenshot of "Advanced networking" page with virtual switch added and enabled for compute in local UI for one node.](./media/azure-stack-edge-gpu-deploy-configure-network-compute-web-proxy/configure-compute-network-3.png)
 
@@ -449,8 +449,9 @@ After the cluster is formed and configured, you can now create new virtual switc
 
     1. Provide a name for your virtual switch. 
     1. Choose the network interface on which the virtual switch should be created. 
-    1. If deploying 5G workloads, set **Supports accelerated networking** to **Yes**.
-    1. Select **Apply**. 
+    1. Select **Apply**.
+
+       You can create Virtual Machines from Azure portal using any of the virtual networks you have created. 
 
 1. The configuration will take a couple minutes to apply and once the virtual switch is created, the list of virtual switches updates to reflect the newly created switch. You can see that the specified virtual switch is created and enabled for compute.
 

articles/databox-online/azure-stack-edge-pro-2-deploy-configure-network-compute-web-proxy.md

@@ -7,7 +7,7 @@ author: alkohli
 ms.service: databox
 ms.subservice: edge
 ms.topic: tutorial
-ms.date: 04/27/2023
+ms.date: 07/19/2023
 ms.author: alkohli
 zone_pivot_groups: azure-stack-edge-device-deployment
 # Customer intent: As an IT admin, I need to understand how to connect and activate Azure Stack Edge Pro so I can use it to transfer data to Azure. 
@@ -476,11 +476,12 @@ After the cluster is formed and configured, you'll now create new virtual switch
 
     1. Provide a name for your virtual switch.
     1. Choose the network interface on which the virtual switch should be created. 
-    1. If deploying 5G workloads, set **Supports accelerated networking** to **Yes**.
     1. Select the intent to associate with this network interface as **compute**. Alternatively, the switch can be used for management traffic as well. You can't configure storage intent as storage traffic was already configured based on the network topology that you selected earlier. 
 
-    > [!TIP] 
-    > Use *CTRL + Click* to select more than one intent for your virtual switch.
+       You can create Virtual Machines from Azure portal using any of the virtual networks you have created.
+
+       > [!TIP] 
+       > Use *CTRL + Click* to select more than one intent for your virtual switch.
  
 1. Assign **Kubernetes node IPs**. These static IP addresses are for the Kubernetes VMs.