Remove more references to ISE

Author: ecfan

articles/connectors/connectors-create-api-azureblobstorage.md

@@ -393,14 +393,12 @@ The steps to add and use an Azure Blob action differ based on whether you want t
 
 You can add network security to an Azure storage account by [restricting access with a firewall and firewall rules](../storage/common/storage-network-security.md). However, this setup creates a challenge for Azure and other Microsoft services that need access to the storage account. Local communication in the data center abstracts the internal IP addresses, so just permitting traffic through IP addresses might not be enough to successfully allow communication across the firewall. Based on which Azure Blob Storage connector you use, the following options are available:
 
-- To access storage accounts behind firewalls using the Azure Blob Storage managed connector in Consumption and ISE-based logic apps, review the following documentation:
+- To access storage accounts behind firewalls using the Azure Blob Storage managed connector in Consumption logic apps, see the following documentation:
 
   - [Access storage accounts in same region with system-managed identities](#access-blob-storage-in-same-region-with-system-managed-identities)
 
   - [Access storage accounts in other regions](#access-storage-accounts-in-other-regions)
 
-- To access storage accounts behind firewalls using the ISE-versioned Azure Blob Storage connector that's only available in an ISE-based logic app, review [Access storage accounts through trusted virtual network](#access-storage-accounts-through-trusted-virtual-network).
-
 - To access storage accounts behind firewalls in Standard logic apps, review the following documentation:
 
   - Azure Blob Storage *built-in* connector: [Access storage accounts through virtual network integration](#access-storage-accounts-through-virtual-network-integration)
@@ -412,6 +410,7 @@ You can add network security to an Azure storage account by [restricting access
 If you don't use managed identity authentication, logic app workflows can't directly access storage accounts behind firewalls when both the logic app resource and storage account exist in the same region. As a workaround, put your logic app resource in a different region than your storage account. Then, give access to the [outbound IP addresses for the managed connectors in your region](/connectors/common/outbound-ip-addresses#azure-logic-apps).
 
 > [!NOTE]
+>
 > This solution doesn't apply to the Azure Table Storage connector and Azure Queue Storage connector. 
 > Instead, to access your Table Storage or Queue Storage, [use the built-in HTTP trigger and action](../logic-apps/logic-apps-http-endpoint.md).
 
@@ -439,7 +438,7 @@ To add your outbound IP addresses to the storage account firewall, follow these
 
 - Your logic app and storage account exist in different regions.
 
-  You don't have to create a private endpoint. You can just permit traffic through the ISE outbound IPs on the storage account.
+  Create a private endpoint on your storage account for access.
 
 ### Access storage accounts through virtual network integration
 
@@ -449,7 +448,7 @@ To add your outbound IP addresses to the storage account firewall, follow these
 
 - Your logic app and storage account exist in different regions.
 
-  You don't have to create a private endpoint. You can just permit traffic through the ISE outbound IPs on the storage account.
+  Create a private endpoint on your storage account for access.
 
 ### Access Blob Storage in same region with system-managed identities
 

articles/connectors/connectors-create-api-sqlazure.md

@@ -94,9 +94,7 @@ For more information, review the [SQL Server managed connector reference](/conne
 
   * Consumption workflow
 
-    * In multitenant Azure Logic Apps, you need the [on-premises data gateway](../logic-apps/logic-apps-gateway-install.md) installed on a local computer and a [data gateway resource that's already created in Azure](../logic-apps/logic-apps-gateway-connection.md).
-
-    * In an ISE, you don't need the on-premises data gateway for SQL Server Authentication and non-Windows Authentication connections, and you can use the ISE-versioned SQL Server connector. For Windows Authentication, you need the [on-premises data gateway](../logic-apps/logic-apps-gateway-install.md) on a local computer and a [data gateway resource that's already created in Azure](../logic-apps/logic-apps-gateway-connection.md). The ISE-version connector doesn't support Windows Authentication, so you have to use the regular SQL Server managed connector.
+    In multitenant Azure Logic Apps, you need the [on-premises data gateway](../logic-apps/logic-apps-gateway-install.md) installed on a local computer and a [data gateway resource that's already created in Azure](../logic-apps/logic-apps-gateway-connection.md).
 
   * Standard workflow
 
@@ -253,10 +251,10 @@ In the connection information box, complete the following steps:
    |----------------|-------------|
    | **Connection string** | - Supported only in Standard workflows with the SQL Server built-in connector. <br><br>- Requires the connection string to your SQL server and database. |
    | **Active Directory OAuth** | - Supported only in Standard workflows with the SQL Server built-in connector. For more information, see the following documentation: <br><br>- [Authentication for SQL Server connector](/connectors/sql/#authentication) <br>- [Enable Open Authorization with Microsoft Entra ID (Microsoft Entra ID OAuth)](../logic-apps/logic-apps-securing-a-logic-app.md#enable-oauth) <br>- [OAuth with Microsoft Entra ID](../logic-apps/logic-apps-securing-a-logic-app.md#oauth-microsoft-entra) |
-   | **Logic Apps Managed Identity** | - Supported with the SQL Server managed connector and ISE-versioned connector. In Standard workflows, this authentication type is available for the SQL Server built-in connector, but the option is named **Managed identity** instead. <br><br>- Requires the following items: <br><br>--- A valid managed identity that's [enabled on your logic app resource](../logic-apps/create-managed-service-identity.md) and has access to your database. <br><br>--- **SQL DB Contributor** role access to the SQL Server resource <br><br>--- **Contributor** access to the resource group that includes the SQL Server resource. <br><br>For more information, see the following documentation: <br><br>- [Managed identity authentication for SQL Server connector](/connectors/sql/#managed-identity-authentication) <br>- [SQL - Server-Level Roles](/sql/relational-databases/security/authentication-access/server-level-roles) |
+   | **Logic Apps Managed Identity** | - Supported with the SQL Server managed connector. In Standard workflows, this authentication type is available for the SQL Server built-in connector, but the option is named **Managed identity** instead. <br><br>- Requires the following items: <br><br>--- A valid managed identity that's [enabled on your logic app resource](../logic-apps/create-managed-service-identity.md) and has access to your database. <br><br>--- **SQL DB Contributor** role access to the SQL Server resource <br><br>--- **Contributor** access to the resource group that includes the SQL Server resource. <br><br>For more information, see the following documentation: <br><br>- [Managed identity authentication for SQL Server connector](/connectors/sql/#managed-identity-authentication) <br>- [SQL - Server-Level Roles](/sql/relational-databases/security/authentication-access/server-level-roles) |
    | **Service principal (Microsoft Entra application)** | - Supported with the SQL Server managed connector. <br><br>- Requires a Microsoft Entra application and service principal. For more information, see [Create a Microsoft Entra application and service principal that can access resources using the Azure portal](../active-directory/develop/howto-create-service-principal-portal.md). |
-   | [**Microsoft Entra integrated**](/azure/azure-sql/database/authentication-aad-overview) | - Supported with the SQL Server managed connector and ISE-versioned connector. <br><br>- Requires a valid managed identity in Microsoft Entra that's [enabled on your logic app resource](../logic-apps/create-managed-service-identity.md) and has access to your database. For more information, see these topics: <br><br>- [Azure SQL Security Overview - Authentication](/azure/azure-sql/database/security-overview#authentication) <br>- [Authorize database access to Azure SQL - Authentication and authorization](/azure/azure-sql/database/logins-create-manage#authentication-and-authorization) <br>- [Azure SQL - Microsoft Entra integrated authentication](/azure/azure-sql/database/authentication-aad-overview) |
-   | [**SQL Server Authentication**](/sql/relational-databases/security/choose-an-authentication-mode#connecting-through-sql-server-authentication) | - Supported with the SQL Server managed connector and ISE-versioned connector. <br><br>- Requires the following items: <br><br>--- A data gateway resource that's previously created in Azure for your connection, regardless whether your logic app is in multitenant Azure Logic Apps or an ISE. <br><br>--- A valid user name and strong password that are created and stored in your SQL Server database. For more information, see the following topics: <br><br>- [Azure SQL Security Overview - Authentication](/azure/azure-sql/database/security-overview#authentication) <br>- [Authorize database access to Azure SQL - Authentication and authorization](/azure/azure-sql/database/logins-create-manage#authentication-and-authorization) |
+   | [**Microsoft Entra integrated**](/azure/azure-sql/database/authentication-aad-overview) | - Supported with the SQL Server managed connector. <br><br>- Requires a valid managed identity in Microsoft Entra that's [enabled on your logic app resource](../logic-apps/create-managed-service-identity.md) and has access to your database. For more information, see these topics: <br><br>- [Azure SQL Security Overview - Authentication](/azure/azure-sql/database/security-overview#authentication) <br>- [Authorize database access to Azure SQL - Authentication and authorization](/azure/azure-sql/database/logins-create-manage#authentication-and-authorization) <br>- [Azure SQL - Microsoft Entra integrated authentication](/azure/azure-sql/database/authentication-aad-overview) |
+   | [**SQL Server Authentication**](/sql/relational-databases/security/choose-an-authentication-mode#connecting-through-sql-server-authentication) | - Supported with the SQL Server managed connector. <br><br>- Requires the following items: <br><br>--- A data gateway resource that's previously created in Azure for your connection, regardless whether your logic app is in multitenant Azure Logic Apps. <br><br>--- A valid user name and strong password that are created and stored in your SQL Server database. For more information, see the following topics: <br><br>- [Azure SQL Security Overview - Authentication](/azure/azure-sql/database/security-overview#authentication) <br>- [Authorize database access to Azure SQL - Authentication and authorization](/azure/azure-sql/database/logins-create-manage#authentication-and-authorization) |
 
    The following examples show how the connection information box might appear if you use the SQL Server *managed* connector and select **Microsoft Entra integrated** authentication:
 
@@ -314,8 +312,8 @@ In the connection information box, complete the following steps:
 
    | Authentication | Description |
    |----------------|-------------|
-   | [**SQL Server Authentication**](/sql/relational-databases/security/choose-an-authentication-mode#connecting-through-sql-server-authentication) | - Supported with the SQL Server managed connector, SQL Server built-in connector, and ISE-versioned connector. <br><br>- Requires the following items: <br><br>--- A data gateway resource that's previously created in Azure for your connection, regardless whether your logic app is in multitenant Azure Logic Apps or an ISE. <br><br>--- A valid user name and strong password that are created and stored in your SQL Server. <br><br>For more information, see [SQL Server Authentication](/sql/relational-databases/security/choose-an-authentication-mode#connecting-through-sql-server-authentication). |
-   | [**Windows Authentication**](/sql/relational-databases/security/choose-an-authentication-mode#connecting-through-windows-authentication) | - Supported with the SQL Server managed connector. <br><br>- Requires the following items: <br><br>--- A data gateway resource that's previously created in Azure for your connection, regardless whether your logic app is in multitenant Azure Logic Apps or an ISE. <br><br>--- A valid Windows user name and password to confirm your identity through your Windows account. <br><br>For more information, see [Windows Authentication](/sql/relational-databases/security/choose-an-authentication-mode#connecting-through-windows-authentication). |
+   | [**SQL Server Authentication**](/sql/relational-databases/security/choose-an-authentication-mode#connecting-through-sql-server-authentication) | - Supported with the SQL Server managed connector and SQL Server built-in connector. <br><br>- Requires the following items: <br><br>--- A data gateway resource that's previously created in Azure for your connection, regardless whether your logic app is in multitenant Azure Logic Apps. <br><br>--- A valid user name and strong password that are created and stored in your SQL Server. <br><br>For more information, see [SQL Server Authentication](/sql/relational-databases/security/choose-an-authentication-mode#connecting-through-sql-server-authentication). |
+   | [**Windows Authentication**](/sql/relational-databases/security/choose-an-authentication-mode#connecting-through-windows-authentication) | - Supported with the SQL Server managed connector. <br><br>- Requires the following items: <br><br>--- A data gateway resource that's previously created in Azure for your connection, regardless whether your logic app is in multitenant Azure Logic Apps. <br><br>--- A valid Windows user name and password to confirm your identity through your Windows account. <br><br>For more information, see [Windows Authentication](/sql/relational-databases/security/choose-an-authentication-mode#connecting-through-windows-authentication). |
 
 1. Select or provide the following values for your SQL database: