Link to new section from Configure network tutorials.

Author: v-dalc

articles/databox-online/azure-stack-edge-gpu-deploy-configure-network-compute-web-proxy.md

@@ -7,7 +7,7 @@ author: alkohli
 ms.service: databox
 ms.subservice: edge
 ms.topic: tutorial
-ms.date: 07/07/2021
+ms.date: 02/22/2022
 ms.author: alkohli
 # Customer intent: As an IT admin, I need to understand how to connect and activate Azure Stack Edge Pro so I can use it to transfer data to Azure. 
 ---
@@ -71,6 +71,9 @@ Follow these steps to configure the network for your device.
     * Network Interface Card (NIC) Teaming or link aggregation is not supported with Azure Stack Edge. 
     * Serial number for any port corresponds to the node serial number.
 
+    > [!NOTE]
+    > If you need to connect to your device from an outside network, see [Enable device access from outside network](azure-stack-edge-gpu-manage-access-power-connectivity-mode.md#enable-device-access-from-outside-network) for additional network settings.
+
     Once the device network is configured, the page updates as shown below.
 
     ![Local web UI "Network settings" page 2](./media/azure-stack-edge-gpu-deploy-configure-network-compute-web-proxy/network-2.png)

articles/databox-online/azure-stack-edge-mini-r-deploy-configure-network-compute-web-proxy.md

@@ -7,7 +7,7 @@ author: alkohli
 ms.service: databox
 ms.subservice: edge
 ms.topic: tutorial
-ms.date: 08/12/2021
+ms.date: 02/22/2022
 ms.author: alkohli
 # Customer intent: As an IT admin, I need to understand how to connect and activate Azure Stack Edge Mini R so I can use it to transfer data to Azure. 
 ---
@@ -131,7 +131,8 @@ Follow these steps to configure the network for your device.
     - Serial number for any port corresponds to the node serial number. For a K-series device, only one serial number is displayed.
 
      > [!NOTE]
-     > We recommend that you do not switch the local IP address of the network interface from static to DCHP, unless you have another IP address to connect to the device. If using one network interface and you switch to DHCP, there would be no way to determine the DHCP address. If you want to change to a DHCP address, wait until after the device has registered with the service, and then change. You can then view the IPs of all the adapters in the **Device properties** in the Azure portal for your service.
+     > - We recommend that you do not switch the local IP address of the network interface from static to DCHP, unless you have another IP address to connect to the device. If using one network interface and you switch to DHCP, there would be no way to determine the DHCP address. If you want to change to a DHCP address, wait until after the device has registered with the service, and then change. You can then view the IPs of all the adapters in the **Device properties** in the Azure portal for your service.
+     > - If you need to connect to your device from an outside network, see [Enable device access from outside network](azure-stack-edge-gpu-manage-access-power-connectivity-mode.md#enable-device-access-from-outside-network) for additional network settings.
 
 After you have configured and applied the network settings, select **Next: Compute** to configure compute network.
 

articles/databox-online/azure-stack-edge-pro-r-deploy-configure-network-compute-web-proxy.md

@@ -7,7 +7,7 @@ author: alkohli
 ms.service: databox
 ms.subservice: edge
 ms.topic: tutorial
-ms.date: 05/11/2021
+ms.date: 02/22/2022
 ms.author: alkohli
 # Customer intent: As an IT admin, I need to understand how to connect and activate Azure Stack Edge Pro R so I can use it to transfer data to Azure. 
 ---
@@ -76,8 +76,8 @@ Follow these steps to configure the network for your device.
 
 
      >[!NOTE]
-     >
      > * We recommend that you do not switch the local IP address of the network interface from static to DCHP, unless you have another IP address to connect to the device. If using one network interface and you switch to DHCP, there would be no way to determine the DHCP address. If you want to change to a DHCP address, wait until after the device has activated with the service, and then change. You can then view the IPs of all the adapters in the **Device properties** in the Azure portal for your service.
+    > * If you need to connect to your device from an outside network, see [Enable device access from outside network](azure-stack-edge-gpu-manage-access-power-connectivity-mode.md#enable-device-access-from-outside-network) for additional network settings.
 
 
     After you have configured and applied the network settings, select **Next: Compute** to configure compute network.