Skip to content

Commit 94d84b2

Browse files
robswainrobswain
committed
catch up and resolve conflicts
2 parents 8fd4d19 + cd7fb1b commit 94d84b2

7 files changed

+98
-27
lines changed

‎articles/private-5g-core/collect-required-information-for-a-site.md

Lines changed: 23 additions & 2 deletions
Original file line numberDiff line numberDiff line change
@@ -61,14 +61,29 @@ Collect all the values in the following table to define the packet core instance
6161
|---------|---------|
6262
| The IP address for the control plane interface on the access network. For 5G, this interface is the N2 interface; for 4G, it's the S1-MME interface; for combined 4G and 5G, it's the N2 and S1-MME interfaces. You identified this address in [Allocate subnets and IP addresses](complete-private-mobile-network-prerequisites.md#allocate-subnets-and-ip-addresses). </br></br> This IP address must match the value you used when deploying the AKS-HCI cluster on your Azure Stack Edge Pro device. You did this as part of the steps in [Order and set up your Azure Stack Edge Pro devices](complete-private-mobile-network-prerequisites.md#order-and-set-up-your-azure-stack-edge-pro-devices). |**N2 address (Signaling)** (for 5G), **S1-MME address** (for 4G), or **S1-MME/N2 address (Signaling)** (for combined 4G and 5G). |
6363
| The virtual network name on port 5 on your Azure Stack Edge Pro device corresponding to the control plane interface on the access network. For 5G, this interface is the N2 interface; for 4G, it's the S1-MME interface; for combined 4G and 5G, it's the N2/S1-MME interface; for combined 4G and 5G, it's the N2/S1-MME interface. </br></br> For an HA deployment, this IP address MUST NOT be in any control plane or user plane subnets; it's used as the destination of routes in the access network gateway routers. | **ASE N2 virtual subnet** (for 5G), **ASE S1-MME virtual subnet** (for 4G), or **ASE N2/S1-MME virtual subnet** (for combined 4G and 5G). |
64+
| The ID number of the VLAN for the N2 network | S1-MME/N2 VLAN ID |
65+
| The subnet for the IP address configured for the N2 interface e.g. 10.232.44.0/24 | S1-MME/N2 subnet |
66+
| The gateway for the IP address configured for the N2 interface e.g. 10.232.44.1. If the subnet does not have a default gateway, use another IP address in the subnet which will respond to ARP requests (such as one of the RAN IP addresses). If there's more than one gNB connected via a switch, choose one of the IP addresses for the gateway. | S1-MME/N2 gateway |
6467
| The virtual network name on port 5 on your Azure Stack Edge Pro device corresponding to the user plane interface on the access network. For 5G, this interface is the N3 interface; for 4G, it's the S1-U interface; for combined 4G and 5G, it's the N3/S1-U interface. </br></br> For an HA deployment, this IP address MUST NOT be in any control plane or user plane subnets; it's used as the destination of routes in the access network gateway routers. | **ASE N3 virtual subnet** (for 5G), **ASE S1-U virtual subnet** (for 4G), or **ASE N3/S1-U virtual subnet** (for combined 4G and 5G). |
68+
| The ID number of the VLAN for the N3 network | S1-U/N3 VLAN ID |
69+
| The local IP address for the N3 interface | S1-U/N3 address |
70+
| The subnet for the IP address configured for the N3 interface e.g. 10.232.44.0/24 | S1-U/N3 subnet |
71+
| The gateway for the IP address configured for the N3 interface e.g. 10.232.44.1. If the subnet does not have a default gateway, use another IP address in the subnet which will respond to ARP requests (such as one of the RAN IP addresses). If there's more than one gNB connected via a switch, choose one of the IP addresses for the gateway. | S1-U/N3 gateway |
6572
:::zone-end
6673
:::zone pivot="ase-pro-2"
6774
|Value |Field name in Azure portal |
6875
|---------|---------|
6976
| The IP address for the control plane interface on the access network. For 5G, this interface is the N2 interface; for 4G, it's the S1-MME interface; for combined 4G and 5G, it's the N2 and S1-MME interfaces. You identified this address in [Allocate subnets and IP addresses](complete-private-mobile-network-prerequisites.md?pivots=ase-pro-2#allocate-subnets-and-ip-addresses). </br></br> This IP address must match the value you used when deploying the AKS-HCI cluster on your Azure Stack Edge Pro device. You did this as part of the steps in [Order and set up your Azure Stack Edge Pro devices](complete-private-mobile-network-prerequisites.md?pivots=ase-pro-2#order-and-set-up-your-azure-stack-edge-pro-devices). |**N2 address (Signaling)** (for 5G), **S1-MME address** (for 4G), or **S1-MME/N2 address (Signaling)** (for combined 4G and 5G). |
7077
| The virtual network name on port 3 on your Azure Stack Edge Pro 2 corresponding to the control plane interface on the access network. For 5G, this interface is the N2 interface; for 4G, it's the S1-MME interface; for combined 4G and 5G, it's the N2/S1-MME interface. </br></br> For an HA deployment, this IP address MUST NOT be in any control plane or user plane subnets; it's used as the destination of routes in the access network gateway routers. | **ASE N2 virtual subnet** (for 5G), **ASE S1-MME virtual subnet** (for 4G), or **ASE N2/S1-MME virtual subnet** (for combined 4G and 5G). |
7178
| The virtual network name on port 3 on your Azure Stack Edge Pro 2 corresponding to the user plane interface on the access network. For 5G, this interface is the N3 interface; for 4G, it's the S1-U interface; for combined 4G and 5G, it's the N3/S1-U interface. </br></br> For an HA deployment, this IP address MUST NOT be in any control plane or user plane subnets; it's used as the destination of routes in the access network gateway routers. | **ASE N3 virtual subnet** (for 5G), **ASE S1-U virtual subnet** (for 4G), or **ASE N3/S1-U virtual subnet** (for combined 4G and 5G). |
79+
| The ID number of the VLAN for the N2 network | S1-MME/N2 VLAN ID |
80+
| The subnet for the IP address configured for the N2 interface e.g. 10.232.44.0/24 | S1-MME/N2 subnet |
81+
| The gateway for the IP address configured for the N2 interface e.g. 10.232.44.1. If the subnet does not have a default gateway, use another IP address in the subnet which will respond to ARP requests (such as one of the RAN IP addresses). If there's more than one gNB connected via a switch, choose one of the IP addresses for the gateway. | S1-MME/N2 gateway |
82+
| The virtual network name on port 3 on your Azure Stack Edge Pro 2 corresponding to the user plane interface on the access network. For 5G, this interface is the N3 interface; for 4G, it's the S1-U interface; for combined 4G and 5G, it's the N3/S1-U interface. | **ASE N3 virtual subnet** (for 5G), **ASE S1-U virtual subnet** (for 4G), or **ASE N3/S1-U virtual subnet** (for combined 4G and 5G). |
83+
| The ID number of the VLAN for the N3 network | S1-U/N3 VLAN ID |
84+
| The local IP address for the N3 interface | S1-U/N3 address |
85+
| The subnet for the IP address configured for the N3 interface e.g. 10.232.44.0/24 | S1-U/N3 subnet |
86+
| The gateway for the IP address configured for the N3 interface e.g. 10.232.44.1. If the subnet does not have a default gateway, use another IP address in the subnet which will respond to ARP requests (such as one of the RAN IP addresses). If there's more than one gNB connected via a switch, choose one of the IP addresses for the gateway. | S1-U/N3 gateway |
7287
:::zone-end
7388

7489
## Collect UE usage tracking values
@@ -97,7 +112,10 @@ For each data network that you want to configure, collect all the values in the
97112
|Value |Field name in Azure portal |
98113
|---------|---------|
99114
| The name of the data network. This could be an existing data network or a new one you'll create during packet core configuration. |**Data network name**|
100-
| The virtual network name on port 6 (or port 5 if you plan to have more than six data networks) on your Azure Stack Edge Pro GPU device corresponding to the user plane interface on the data network. For 5G, this interface is the N6 interface; for 4G, it's the SGi interface; for combined 4G and 5G, it's the N6/SGi interface. | **ASE N6 virtual subnet** (for 5G) or **ASE SGi virtual subnet** (for 4G), or **ASE N6/SGi virtual subnet** (for combined 4G and 5G). |
115+
| The ID number of the VLAN for the data network | SGi/N6 VLAN ID |
116+
| The IP address of the N6 interface | SGi/N6 address |
117+
| __THIS LINE NEEDS CHANGING AND PULLING OUT FROM THE LIST. THERE IS NOW A VIRTUAL NETWORK NAME SHARED ACROSS ALL DATA NETWORKS__ The virtual network name on port 6 (or port 5 if you plan to have more than six data networks) on your Azure Stack Edge Pro GPU device corresponding to the user plane interface on the data network. For 5G, this interface is the N6 interface; for 4G, it's the SGi interface; for combined 4G and 5G, it's the N6/SGi interface. | **ASE N6 virtual subnet** (for 5G) or **ASE SGi virtual subnet** (for 4G), or **ASE N6/SGi virtual subnet** (for combined 4G and 5G). |
118+
| The gateway of the IP address configured for the N6 interface | SGi/N6 gateway |
101119
| The network address of the subnet from which dynamic IP addresses must be allocated to user equipment (UEs), given in CIDR notation. You don't need this address if you don't want to support dynamic IP address allocation for this site. You identified this in [Allocate user equipment (UE) IP address pools](complete-private-mobile-network-prerequisites.md?pivots=ase-pro-gpu#allocate-user-equipment-ue-ip-address-pools). The following example shows the network address format. </br></br>`192.0.2.0/24` </br></br>Note that the UE subnets aren't related to the access subnet. |**Dynamic UE IP pool prefixes**|
102120
| The network address of the subnet from which static IP addresses must be allocated to user equipment (UEs), given in CIDR notation. You don't need this address if you don't want to support static IP address allocation for this site. You identified this in [Allocate user equipment (UE) IP address pools](complete-private-mobile-network-prerequisites.md?pivots=ase-pro-gpu#allocate-user-equipment-ue-ip-address-pools). The following example shows the network address format. </br></br>`203.0.113.0/24` </br></br>Note that the UE subnets aren't related to the access subnet. |**Static UE IP pool prefixes**|
103121
| The Domain Name System (DNS) server addresses to be provided to the UEs connected to this data network. You identified this in [Allocate subnets and IP addresses](complete-private-mobile-network-prerequisites.md?pivots=ase-pro-gpu#allocate-subnets-and-ip-addresses). </br></br>This value might be an empty list if you don't want to configure a DNS server for the data network. In this case, UEs in this data network will be unable to resolve domain names. | **DNS Addresses** |
@@ -107,7 +125,10 @@ For each data network that you want to configure, collect all the values in the
107125
|Value |Field name in Azure portal |
108126
|---------|---------|
109127
| The name of the data network. This could be an existing data network or a new one you'll create during packet core configuration. |**Data network name**|
110-
| The virtual network name on port 4 (or port 3 if you plan to have more than six data networks) on your Azure Stack Edge Pro 2 device corresponding to the user plane interface on the data network. For 5G, this interface is the N6 interface; for 4G, it's the SGi interface; for combined 4G and 5G, it's the N6/SGi interface. | **ASE N6 virtual subnet** (for 5G) or **ASE SGi virtual subnet** (for 4G), or **ASE N6/SGi virtual subnet** (for combined 4G and 5G). |
128+
| The ID number of the VLAN for the data network | SGi/N6 VLAN ID |
129+
| The IP address of the N6 interface | SGi/N6 address |
130+
| __THIS LINE NEEDS CHANGING AND PULLING OUT FROM THE LIST. THERE IS NOW A VIRTUAL NETWORK NAME SHARED ACROSS ALL DATA NETWORKS__ The virtual network name on port 4 (or port 3 if you plan to have more than six data networks) on your Azure Stack Edge Pro 2 device corresponding to the user plane interface on the data network. For 5G, this interface is the N6 interface; for 4G, it's the SGi interface; for combined 4G and 5G, it's the N6/SGi interface. | **ASE N6 virtual subnet** (for 5G) or **ASE SGi virtual subnet** (for 4G), or **ASE N6/SGi virtual subnet** (for combined 4G and 5G). |
131+
| The gateway of the IP address configured for the N6 interface | SGi/N6 gateway |
111132
| The network address of the subnet from which dynamic IP addresses must be allocated to user equipment (UEs), given in CIDR notation. You don't need this address if you don't want to support dynamic IP address allocation for this site. You identified this in [Allocate user equipment (UE) IP address pools](complete-private-mobile-network-prerequisites.md?pivots=ase-pro-2#allocate-user-equipment-ue-ip-address-pools). The following example shows the network address format. </br></br>`192.0.2.0/24` </br></br>Note that the UE subnets aren't related to the access subnet. |**Dynamic UE IP pool prefixes**|
112133
| The network address of the subnet from which static IP addresses must be allocated to user equipment (UEs), given in CIDR notation. You don't need this address if you don't want to support static IP address allocation for this site. You identified this in [Allocate user equipment (UE) IP address pools](complete-private-mobile-network-prerequisites.md?pivots=ase-pro-2#allocate-user-equipment-ue-ip-address-pools). The following example shows the network address format. </br></br>`203.0.113.0/24` </br></br>Note that the UE subnets aren't related to the access subnet. |**Static UE IP pool prefixes**|
113134
| The Domain Name System (DNS) server addresses to be provided to the UEs connected to this data network. You identified this in [Allocate subnets and IP addresses](complete-private-mobile-network-prerequisites.md?pivots=ase-pro-2#allocate-subnets-and-ip-addresses). </br></br>This value might be an empty list if you don't want to configure a DNS server for the data network. In this case, UEs in this data network will be unable to resolve domain names. | **DNS Addresses** |

0 commit comments

Comments
 (0)