moved wording of port4 or 6 ip address to before per-DN stuff

Author: nsant15

articles/private-5g-core/complete-private-mobile-network-prerequisites.md

@@ -102,14 +102,6 @@ Depending on your networking requirements (for example, if a limited set of subn
 
 ### Data networks
 
-Allocate the following IP addresses for each data network in the site:
-
-- Network address in CIDR notation.
-- Default gateway.
-- One IP address for the user plane interface.
-  - For 5G, this is the N6 interface
-  - For 4G, this is the SGi interface.
-  - For combined 4G and 5G, this is the N6/SGi interface.
 :::zone pivot="ase-pro-2"
 
 - One IP address for port 4 on the Azure Stack Edge Pro GPU device.
@@ -119,6 +111,15 @@ Allocate the following IP addresses for each data network in the site:
 - One IP address for port 6 on the Azure Stack Edge Pro GPU device.
 :::zone-end
 
+Allocate the following IP addresses for each data network in the site:
+
+- Network address in CIDR notation.
+- Default gateway.
+- One IP address for the user plane interface.
+  - For 5G, this is the N6 interface
+  - For 4G, this is the SGi interface.
+  - For combined 4G and 5G, this is the N6/SGi interface.
+
 ### VLANs
 
 You can optionally configure your Azure Stack Edge Pro device with virtual local area network (VLAN) tags. You can use this configuration to enable layer 2 traffic separation on the N2, N3 and N6 interfaces, or their 4G equivalents. For example, you might want to separate N2 and N3 traffic (which share a port on the ASE device) or separate traffic for each connected data network.