You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
| Device management | <li>Azure subscription</li><li>Resource providers registered</li><li>Azure Storage account</li>|<li>Enabled for Azure Stack Edge Mini R/Data Box Gateway, owner or contributor access.</li><li>In Azure portal, go to **Home > Subscriptions > Your-subscription > Resource providers**. Search for `Microsoft.DataBoxEdge` and register. Repeat for `Microsoft.Devices` if deploying IoT workloads.</li><li>Need access credentials</li> |
24
-
| Device installation | Power cables in the package. <br>For US, an SVE 18/3 cable rated for 125 V and 15 Amps with a NEMA 5-15P to C13 (input to output) connector is shipped. | For more information, see the list of [Supported power cords by country](azure-stack-edge-technical-specifications-power-cords-regional.md)|
25
-
|| <li>At least 1 X 1-GbE RJ-45 network cable for Port 1 </li><li>At least 1 X 25-GbE SFP+ copper cable for Port 3, Port 4, Port 5, or Port 6</li>| Customer needs to procure these cables.<br>For a full list of supported network cables, switches, and transceivers for device network cards, see [Cavium FastlinQ 41000 Series Interoperability Matrix](https://www.marvell.com/documents/xalflardzafh32cfvi0z/) and [Mellanox dual port 25G ConnectX-4 channel network adapter compatible products](https://docs.mellanox.com/display/ConnectX4LxFirmwarev14271016/Firmware+Compatible+Products).|
23
+
| Device management | <ul><li>Azure subscription</li><li>Resource providers registered</li><li>Azure Storage account</li></ul>|<ul><li>Enabled for Azure Stack Edge Mini R/Data Box Gateway, owner or contributor access.</li><li>In Azure portal, go to **Home > Subscriptions > Your-subscription > Resource providers**. Search for `Microsoft.DataBoxEdge` and register. Repeat for `Microsoft.Devices` if deploying IoT workloads.</li><li>Need access credentials</li></ul> |
24
+
| Device installation | Power cables in the package. <br>For US, an SVE 18/3 cable rated for 125 V and 15 Amps with a NEMA 5-15P to C13 (input to output) connector is shipped. | For more information, see the list of [Supported power cords by country](azure-stack-edge-technical-specifications-power-cords-regional.md).|
25
+
|| <ul><li>At least 1 X 1-GbE RJ-45 network cable for Port 1 </li><li>At least 1 X 25-GbE SFP+ copper cable for Port 3, Port 4, Port 5, or Port 6</li></ul>| Customer needs to procure these cables.<br>For a full list of supported network cables, switches, and transceivers for device network cards, see [Cavium FastlinQ 41000 Series Interoperability Matrix](https://www.marvell.com/documents/xalflardzafh32cfvi0z/) and [Mellanox dual port 25G ConnectX-4 channel network adapter compatible products](https://docs.mellanox.com/display/ConnectX4LxFirmwarev14271016/Firmware+Compatible+Products).|
26
26
| Network readiness | Check to see how ready your network is for the deployment of an Azure Stack Edge device. [Use the Azure Stack Network Readiness Checker](azure-stack-edge-deploy-check-network-readiness.md) to test all needed connections. |
27
-
| First-time device connection |<li>Laptop whose IPv4 settings can be changed. This laptop connects to Port 1 via a switch or a USB to Ethernet adaptor. </li><!--<li> A minimum of 1 GbE switch must be used for the device once the initial setup is complete. The local web UI will not be accessible if the connected switch is not at least 1 Gbe.</li>-->||
27
+
| First-time device connection | Laptop whose IPv4 settings can be changed. This laptop connects to Port 1 via a switch or a USB to Ethernet adaptor.<!--<li> A minimum of 1 GbE switch must be used for the device once the initial setup is complete. The local web UI will not be accessible if the connected switch is not at least 1 Gbe.</li>-->||
28
28
| Device sign-in | Device administrator password, between 8 and 16 characters, including three of the following character types: uppercase, lowercase, numeric, and special characters. | Default password is *Password1*, which expires at first sign-in. |
29
-
| Network settings | Device comes with 2 x 1-GbE, 4 x 25-GbE network ports. <li>Port 1 is used to configure management settings only. One or more data ports can be connected and configured. </li><li> At least one data network interface from among Port 2 - Port 6 needs to be connected to the Internet (with connectivity to Azure).</li><li> DHCP and static IPv4 configuration supported. | Static IPv4 configuration requires IP, DNS server, and default gateway. |
30
-
| Compute network settings | <li>Require 2 free, static, contiguous IPs for Kubernetes nodes, and 1 static IP for IoT Edge service.</li><li>Require 1 additional IP for each extra service or module that you'll deploy.</li>| Only static IPv4 configuration is supported.|
31
-
| (Optional) Web proxy settings | <li>Web proxy server IP/FQDN, port </li><li>Web proxy username, password</li> ||
29
+
| Network settings | Device comes with 2 x 1-GbE, 4 x 25-GbE network ports. <ul><li>Port 1 is used to configure management settings only. One or more data ports can be connected and configured. </li><li> At least one data network interface from among Port 2 - Port 6 needs to be connected to the Internet (with connectivity to Azure).</li><li> DHCP and static IPv4 configuration supported.</li></ul>| Static IPv4 configuration requires IP, DNS server, and default gateway. |
30
+
| Compute network settings | <ul><li>Require 2 free, static, contiguous IPs for Kubernetes nodes, and 1 static IP for IoT Edge service.</li><li>Require 1 additional IP for each extra service or module that you'll deploy.</li></ul>| Only static IPv4 configuration is supported.|
31
+
| (Optional) Web proxy settings | <ul><li>Web proxy server IP/FQDN, port </li><li>Web proxy username, password</li></ul> ||
32
32
| Firewall and port settings | If using firewall, make sure the [listed URLs patterns and ports](azure-stack-edge-system-requirements.md#networking-port-requirements) are allowed for device IPs. ||
33
33
| (Recommended) Time settings | Configure time zone, primary NTP server, secondary NTP server. | Configure primary and secondary NTP server on local network.<br>If local server is not available, public NTP servers can be configured. |
34
-
| (Optional) Update server settings |<li>Require update server IP address on local network, path to WSUS server. </li> | By default, public windows update server is used.|
| (Optional) Certificates | To test non-production workloads, use [Generate certificates option](azure-stack-edge-gpu-deploy-configure-certificates.md#generate-device-certificates) <br><br> If you bring your own certificates including the signing chain(s), [Add certificates](azure-stack-edge-gpu-deploy-configure-certificates.md#bring-your-own-certificates) in appropriate format.| Configure certificates only if you change the device name and/or DNS domain. |
34
+
| (Optional) Update server settings | Require update server IP address on local network, path to WSUS server. | By default, public Windows update server is used.|
| (Optional) Certificates | To test non-production workloads, use [Generate certificates option](azure-stack-edge-gpu-deploy-configure-certificates.md#generate-device-certificates). <br><br> If you bring your own certificates including the signing chain(s), [Add certificates](azure-stack-edge-gpu-deploy-configure-certificates.md#bring-your-own-certificates) in appropriate format.| Configure certificates only if you change the device name and/or DNS domain. |
37
37
| Activation | Require activation key from the Azure Stack Edge resource. | Once generated, the key expires in 3 days. |
38
38
39
39
<!--
@@ -43,4 +43,5 @@ Use the following checklist to ensure you have this information after you have p
43
43
44
44
## Next steps
45
45
46
-
Prepare to deploy your [Azure Stack Edge Mini R device](azure-stack-edge-gpu-deploy-prep.md).
46
+
- Prepare to deploy your [Azure Stack Edge Mini R device](azure-stack-edge-gpu-deploy-prep.md).
47
+
- Use the [Azure Stack Edge Network Readiness Tool](azure-stack-edge-deploy-check-network-readiness.md) to verify your network settings.
| Device management | <li>Azure subscription</li><li>Resource providers registered</li><li>Azure Storage account</li>|<li>Enabled for Azure Stack Edge Pro/Data Box Gateway, owner or contributor access.</li><li>In Azure portal, go to **Home > Subscriptions > Your-subscription > Resource providers**. Search for `Microsoft.DataBoxEdge` and register. Repeat for `Microsoft.Devices` if deploying IoT workloads.</li><li>Need access credentials</li> |
24
-
| Device installation | Power cables in the package. <br>For US, an SVE 18/3 cable rated for 125 V and 15 Amps with a NEMA 5-15P to C13 (input to output) connector is shipped. | For more information, see the list of [Supported power cords by country](azure-stack-edge-technical-specifications-power-cords-regional.md)|
25
-
|| <li>At least 1 X 1-GbE RJ-45 network cable for Port 1 </li><li> At least 1 X 25-GbE SFP+ copper cable for Port 3, Port 4</li>| Customer needs to procure these cables.<br>For a full list of supported network cables, switches, and transceivers for device network cards, see [Cavium FastlinQ 41000 Series Interoperability Matrix](https://www.marvell.com/documents/xalflardzafh32cfvi0z/) and [Mellanox dual port 25G ConnectX-4 channel network adapter compatible products](https://docs.mellanox.com/display/ConnectX4LxFirmwarev14271016/Firmware+Compatible+Products).|
23
+
| Device management | <ul><li>Azure subscription</li><li>Resource providers registered</li><li>Azure Storage account</li></ul>|<ul><li>Enabled for Azure Stack Edge Pro/Data Box Gateway, owner or contributor access.</li><li>In Azure portal, go to **Home > Subscriptions > Your-subscription > Resource providers**. Search for `Microsoft.DataBoxEdge` and register. Repeat for `Microsoft.Devices` if deploying IoT workloads.</li><li>Need access credentials.</li></ul> |
24
+
| Device installation | Power cables in the package. <br>For US, an SVE 18/3 cable rated for 125 V and 15 Amps with a NEMA 5-15P to C13 (input to output) connector is shipped. | For more information, see the list of [Supported power cords by country](azure-stack-edge-technical-specifications-power-cords-regional.md).|
25
+
|| <ul><li>At least 1 X 1-GbE RJ-45 network cable for Port 1 </li><li> At least 1 X 25-GbE SFP+ copper cable for Port 3, Port 4</li><ul>| Customer needs to procure these cables.<br>For a full list of supported network cables, switches, and transceivers for device network cards, see [Cavium FastlinQ 41000 Series Interoperability Matrix](https://www.marvell.com/documents/xalflardzafh32cfvi0z/) and [Mellanox dual port 25G ConnectX-4 channel network adapter compatible products](https://docs.mellanox.com/display/ConnectX4LxFirmwarev14271016/Firmware+Compatible+Products).|
26
26
| Network readiness | Check to see how ready your network is for the deployment of an Azure Stack Edge device. [Use the Azure Stack Network Readiness Checker](azure-stack-edge-deploy-check-network-readiness.md) to test all needed connections. |
27
-
| First-time device connection |<li>Laptop whose IPv4 settings can be changed. This laptop connects to Port 1 via a switch or a USB to Ethernet adaptor. </li><!--<li> A minimum of 1 GbE switch must be used for the device once the initial setup is complete. The local web UI will not be accessible if the connected switch is not at least 1 Gbe.</li>-->||
27
+
| First-time device connection | Laptop whose IPv4 settings can be changed. This laptop connects to Port 1 via a switch or a USB to Ethernet adaptor. <!--<li> A minimum of 1 GbE switch must be used for the device once the initial setup is complete. The local web UI will not be accessible if the connected switch is not at least 1 Gbe.</li>-->||
28
28
| Device sign-in | Device administrator password, between 8 and 16 characters, including three of the following character types: uppercase, lowercase, numeric, and special characters. | Default password is *Password1*, which expires at first sign-in. |
29
-
| Network settings | Device comes with 2 x 1-GbE, 4 x 25-GbE network ports. <li>Port 1 is used to configure management settings only. One or more data ports can be connected and configured. </li><li> At least one data network interface from among Port 2 - Port 6 needs to be connected to the Internet (with connectivity to Azure).</li><li> DHCP and static IPv4 configuration supported. | Static IPv4 configuration requires IP, DNS server, and default gateway. |
30
-
| Compute network settings | <li>Require 2 free, static, contiguous IPs for Kubernetes nodes, and 1 static IP for IoT Edge service.</li><li>Require one additional IP for each extra service or module that you'll deploy.</li>| Only static IPv4 configuration is supported.|
31
-
| (Optional) Web proxy settings | <li>Web proxy server IP/FQDN, port </li><li>Web proxy username, password</li> ||
29
+
| Network settings | Device comes with 2 x 1-GbE, 4 x 25-GbE network ports. <ul><li>Port 1 is used to configure management settings only. One or more data ports can be connected and configured. </li><li> At least one data network interface from among Port 2 - Port 6 needs to be connected to the Internet (with connectivity to Azure).</li><li> DHCP and static IPv4 configuration supported.</li></ul>| Static IPv4 configuration requires IP, DNS server, and default gateway. |
30
+
| Compute network settings | <ul><li>Require 2 free, static, contiguous IPs for Kubernetes nodes, and 1 static IP for IoT Edge service.</li><li>Require one additional IP for each extra service or module that you'll deploy.</li></ul>| Only static IPv4 configuration is supported.|
31
+
| (Optional) Web proxy settings | <ul><li>Web proxy server IP/FQDN, port </li><li>Web proxy username, password</li></ul> ||
32
32
| Firewall and port settings | If using firewall, make sure the [listed URLs patterns and ports](azure-stack-edge-system-requirements.md#networking-port-requirements) are allowed for device IPs. ||
33
33
| (Recommended) Time settings | Configure time zone, primary NTP server, secondary NTP server. | Configure primary and secondary NTP server on local network.<br>If local server is not available, public NTP servers can be configured. |
34
-
| (Optional) Update server settings |<li>Require update server IP address on local network, path to WSUS server. </li> | By default, public windows update server is used.|
| (Optional) Update server settings | Require update server IP address on local network, path to WSUS server. | By default, public Windows update server is used.|
| (Optional) Certificates | If you bring your own certificates including the signing chain(s), [Add certificates](azure-stack-edge-pro-r-deploy-configure-certificates-vpn-encryption.md#bring-your-own-certificates) in appropriate format.| Configure certificates only if you change device name and/or DNS domain. |
37
37
| VPN |<!--Need VPN certificate, VPN gateway, firewall setup in Azure, passphrase and region info VPN scripts. -->||
38
-
| Encryption-at-rest | Recommend using automatically generated encryption key. |If using your own key, need a 32 character long Base-64 encoded key. |
38
+
| Encryption-at-rest | Recommend using automatically generated encryption key. |If using your own key, you need a 32 character long Base-64 encoded key. |
39
39
| Activation | Require activation key from the Azure Stack Edge Pro/ Data Box Gateway resource. | Once generated, the key expires in 3 days. |
40
40
41
41
<!--
@@ -45,4 +45,5 @@ Use the following checklist to ensure you have this information after you have p
45
45
46
46
## Next steps
47
47
48
-
Prepare to deploy your [Azure Stack Edge Pro device](azure-stack-edge-pro-r-deploy-prep.md).
48
+
- Prepare to deploy your [Azure Stack Edge Pro device](azure-stack-edge-pro-r-deploy-prep.md).
49
+
- Use the [Azure Stack Edge Network Readiness Tool](azure-stack-edge-deploy-check-network-readiness.md) to verify your network settings.
0 commit comments