minor edit

Author: Shereen-Bhar

articles/defender-for-iot/organizations/how-to-enhance-port-and-vlan-name-resolution.md

@@ -44,13 +44,9 @@ VLANS are either discovered automatically by the sensor or added manually. When
 Before you start, note that:
 
 - Manual VLANs can be edited and deleted, but automatically discovered VLANs can’t.
-
-- VLAN names are not synchronized between the sensor and the management console. You need to define the name on the management console as well.
-
+- VLAN names aren't synchronized between the sensor and the management console. You need to define the name on the management console as well.
 - VLANs support is based on 802.1q (up to VLAN ID 4094).
 
-For Cisco switches, add the following line to the span configuration: `monitor session 1 destination interface XX/XX encapsulation dot1q`. In that command, *XX/XX* is the name and number of the port.
-
 **To configure VLAN names:**
 
 1. Sign in to your network sensor and select **System Settings**.
@@ -65,6 +61,12 @@ For Cisco switches, add the following line to the span configuration: `monitor s
 
 1. Select **Save**.
 
+**For Cisco switches:**
+
+Add the following line to the span configuration: `monitor session 1 destination interface XX/XX encapsulation dot1q`.
+
+In that command, *XX/XX* is the name and number of the port.
+
 ## Next steps
 
 View enriched device information in various reports: