Merge pull request #203761 from alkohli/portno

Engg ADO 14208368 - port numbering for GPU devices

Author: liljack17

articles/databox-online/azure-stack-edge-gpu-deploy-connect.md

@@ -7,7 +7,7 @@ author: alkohli
 ms.service: databox
 ms.subservice: edge
 ms.topic: tutorial
-ms.date: 03/21/2022
+ms.date: 07/05/2022
 ms.author: alkohli
 zone_pivot_groups: azure-stack-edge-device-deployment
 # Customer intent: As an IT admin, I need to understand how to connect to Azure Stack Edge Pro GPU so I can use it to transfer data to Azure. 
@@ -52,12 +52,9 @@ Before you configure and set up your Azure Stack Edge Pro GPU device, make sure
 
 1. Configure the Ethernet adapter on your computer to connect to the Azure Stack Edge Pro device with a static IP address of 192.168.100.5 and subnet 255.255.255.0.
 
-2. Connect the computer to PORT 1 on your device. If connecting the computer to the device directly (without a switch), use an Ethernet crossover cable or a USB Ethernet adapter. Use the following illustration to identify PORT 1 on your device.
-
-    ![Backplane of a cabled device](./media/azure-stack-edge-gpu-deploy-install/two-pci-slots.png)
-
-    The backplane of the device may look slightly different depending on the exact model you have received. For more information, see [Cable your device](azure-stack-edge-gpu-deploy-install.md#cable-the-device).
+2. Connect the computer to PORT 1 on your device. If connecting the computer to the device directly (without a switch), use an Ethernet crossover cable or a USB Ethernet adapter. 
 
+    The backplane of the device may look slightly different depending on the exact model you have received. Use the illustrations in [Cable your device](azure-stack-edge-gpu-deploy-install.md#cable-the-device) to identify Port 1 on your device.
 
 3. Open a browser window and access the local web UI of the device at `https://192.168.100.10`.  
     This action may take a few minutes after you've turned on the device.
@@ -86,6 +83,8 @@ You're now at the **Overview** page of your device. The next step is to configur
 
 1. Connect the computer to PORT 1 on the first node of your 2-node device. If connecting the computer to the device directly (without a switch), use an Ethernet crossover cable or a USB Ethernet adapter. 
 
+    The backplane of the device may look slightly different depending on the exact model you have received. Use the illustrations in [Cable your device](azure-stack-edge-gpu-deploy-install.md#cable-the-device) to identify Port 1 on your device.
+
 1. Open a browser window and access the local web UI of the device at `https://192.168.100.10`.  
     This action may take a few minutes after you've turned on the device.
 

articles/databox-online/azure-stack-edge-gpu-deploy-install.md

@@ -7,7 +7,7 @@ author: alkohli
 ms.service: databox
 ms.subservice: edge
 ms.topic: tutorial
-ms.date: 05/17/2022
+ms.date: 07/05/2022
 ms.author: alkohli
 zone_pivot_groups: azure-stack-edge-device-deployment
 # Customer intent: As an IT admin, I need to understand how to install Azure Stack Edge Pro in datacenter so I can use it to transfer data to Azure.  
@@ -304,8 +304,17 @@ Take the following steps to cable your device for power and network.
 
 1. Identify the various ports on the back plane of your device. <!--You may have received one of the following devices from the factory depending on the number of GPUs in your device.-->
 
-    ![Back plane of a cabled device](./media/azure-stack-edge-gpu-deploy-install/backplane-ports.png)
+    - Device with two Peripheral Component Interconnect (PCI) slots and one GPU
+     
+        ![Back plane of a cabled device 1.](./media/azure-stack-edge-gpu-deploy-install/backplane-ports.png)
+
+    - Device with three PCI slots and one GPU
+
+        ![Back plane of a cabled device 2.](./media/azure-stack-edge-gpu-deploy-install/backplane-ports-3.png)
+     
+    - Device with three PCI slots and two GPUs
 
+        ![Back plane of a cabled device 3.](./media/azure-stack-edge-gpu-deploy-install/backplane-ports-2.png)   
 
 2. Locate the disk slots and the power button on the front of the device.
 

articles/databox-online/azure-stack-edge-gpu-quickstart.md

@@ -6,7 +6,7 @@ author: alkohli
 ms.service: databox
 ms.subservice: edge
 ms.topic: quickstart
-ms.date: 02/15/2022
+ms.date: 07/08/2022
 ms.author: alkohli
 ms.custom: mode-ui
 #Customer intent: As an IT admin, I need to understand how to prepare the portal to quickly deploy Azure Stack Edge so I can use it to transfer data to Azure.