Merge pull request #283112 from tarTech23/bom

update BOM typo

Author: AnnaMHuff

articles/defender-for-iot/organizations/appliance-catalog/dell-edge-5200.md

@@ -36,7 +36,7 @@ The following image shows the hardware elements on the Dell Edge 5200 that are u
 |Device access|	6x USB 3.0|
 |Power|	DC Input 12–24 V (±10% tolerance) <br>AC Input Optional: 180 W / 220 W, 60 W (for PoE) external AC/DC adapter|
 
-## Appliance BOM
+## Dell Edge 5200 Bill of materials
 
 |Quantity|PN|Description|
 |:----|:----|:----|

articles/defender-for-iot/organizations/appliance-catalog/dell-poweredge-r350-e1800.md

@@ -42,7 +42,7 @@ The following image shows a view of the Dell PowerEdge R350 back panel:
 |Power| Dual, Hot-Plug, Redundant Power Supply (1+1), 600 W|
 |Rack support| ReadyRails Sliding Rails With Cable Management Arm|
 
-## Dell PowerEdge R350 - Bill of Materials
+## Dell PowerEdge R350 - Bill of materials
 
 |Quantity|PN|Description|
 |----|---|----|

articles/defender-for-iot/organizations/appliance-catalog/dell-poweredge-r360-e1800.md

@@ -38,7 +38,7 @@ The following image shows a view of the Dell PowerEdge R360 back panel:
 |Management|iDRAC Group Manager, Disabled|
 |Rack support| ReadyRails Sliding Rails With Cable Management Arm|
 
-## Dell PowerEdge R360 - Bill of Materials
+## Dell PowerEdge R360 - Bill of materials
 
 |Quantity|PN|Description|
 |----|---|----|

articles/defender-for-iot/organizations/appliance-catalog/dell-xe4-sff.md

@@ -48,7 +48,7 @@ The following image shows the DELL XE4 SFF dust filter installation and maintena
 |Shock |Bottom/Right half-sine pulse 40G, 2 ms |
 |EMC |Product Safety, EMC and Environmental Datasheets <br><https://www.dell.com/learn/us/en/uscorp1/product-info-datasheets-safety-emc-environmental> |
 
-## DELL XE4 SFF - Bill of Materials
+## DELL XE4 SFF - Bill of materials
 
 |Type|Description|PN|Quantity|
 |----|---|----|----|

articles/defender-for-iot/organizations/appliance-catalog/hpe-edgeline-el300.md

@@ -45,7 +45,7 @@ The following image shows a view of the back panel of the HPE Edgeline EL300.
 |Vibration|0.3 gram 10 Hz to 300 Hz, 15 minutes per axis - Din rail|
 |Shock|10G 10 ms, half-sine, three for each axis. (Both positive and negative pulse) – Din Rail|
 
-### Appliance BOM
+### HPE Edgeline EL300 - Bill of materials
 
 |Product|Description|
 |:----|:----|

articles/defender-for-iot/organizations/appliance-catalog/hpe-proliant-dl20-gen-11-nhp-2lff.md

@@ -36,7 +36,7 @@ This article describes the **HPE ProLiant DL20 Gen 11** appliance for OT sensors
 |Power|HPE 800 W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit |
 |Rack support|HPE Easy Install Rail 12 Kit |
 
-## DL20 Gen11 (NHP 2LFF) - Bill of Materials
+## DL20 Gen11 (NHP 2LFF) - Bill of materials
 
 |Quantity|PN|Description|
 |----|---|----|

articles/defender-for-iot/organizations/appliance-catalog/hpe-proliant-dl20-gen-11.md

@@ -38,7 +38,7 @@ The HPE ProLiant DL20 Gen11 is also available for the on-premises management con
 |Power|HPE 1,000 W Flex Slot Titanium Hot Plug Power Supply Kit |
 |Rack support|HPE 1U Short Friction Rail Kit |
 
-## DL20 Gen11 (4SFF) - Bill of Materials
+## DL20 Gen11 (4SFF) - Bill of materials
 
 |Quantity|PN|Description|
 |----|---|----|

articles/defender-for-iot/organizations/appliance-catalog/hpe-proliant-dl20-legacy.md

@@ -35,7 +35,7 @@ The following image shows a sample of the HPE ProLiant DL20 back panel:
 |Dimensions   |Four 3.5" chassis: 4.29 x 43.46 x 38.22 cm  /  1.70 x 17.11 x 15.05 in         |
 |Weight    | Max 7.9 kg / 17.41 lb        |
 
-## DL20 Gen10 BOM
+## DL20 Gen10 - Bill of materials
 
 | Quantity | PN| Description: high end |
 |--|--|--|

articles/defender-for-iot/organizations/appliance-catalog/hpe-proliant-dl20-plus-enterprise.md

@@ -45,7 +45,7 @@ The following image shows a sample of the HPE ProLiant DL20 back panel:
 |Power|2x Hot Plug Power Supply 290 W|
 |Rack support|HPE 1U Short Friction Rail Kit|
 
-## DL20 Gen10 Plus (4SFF) - Bill of Materials
+## DL20 Gen10 Plus (4SFF) - Bill of materials
 
 |Quantity|PN|Description|
 |----|---|----|
@@ -56,18 +56,18 @@ The following image shows a sample of the HPE ProLiant DL20 back panel:
 |1|	869079-B21 | HPE Smart Array E208i-a SR G10 LH Ctrlr (RAID10)|
 |1|	P21106-B21 | INT I350 1 GbE 4p BASE-T Adapter|
 |1|	P45948-B21 | HPE DL20 Gen10+ RPS FIO Enable Kit|
-|2|	865408-B21 | HPE 500W FS Plat Hot Plug LH Power Supply Kit|
+|2|	865408-B21 | HPE 500 W FS Plat Hot Plug LH Power Supply Kit|
 |1|	775612-B21 | HPE 1U Short Friction Rail Kit|
 |1|	512485-B21 | HPE iLO Adv 1 Server License 1 year support|
 |1|	P46114-B21 | HPE DL20 Gen10+ 2x8 LP FIO Riser Kit|
 
 ## Optional Storage Controllers
-Multi-disk RAID arrays combine multiple physical drives into one logical drive for increased redundancy and performance. The optional modules below have been tested in our lab for compatibility and sustained performance:
+Multi-disk RAID arrays combine multiple physical drives into one logical drive for increased redundancy and performance. The optional modules below were tested in our lab for compatibility and sustained performance:
 
 |Quantity|PN|Description|
 |----|---|----|
 |1| 869079-B21 | HPE Smart Array E208i-a SR G10 LH Ctrlr (RAID10) |
-|1| P26325-B21 | Broadcom MegaRAID MR216i-a x16 Lanes without Cache NVMe/SAS 12G Controller (RAID5)<br><br>**Note**: This RAID controller occupies the PCIe expansion slot and does not allow expansion of networking port expansion |
+|1| P26325-B21 | Broadcom MegaRAID MR216i-a x16 Lanes without Cache NVMe/SAS 12G Controller (RAID5)<br><br>**Note**: This RAID controller occupies the PCIe expansion slot and doesn't allow expansion of networking port expansion |
 
 ## Optional port expansion
 Optional modules for port expansion include:
@@ -125,12 +125,12 @@ Use the following procedure to set up network options and update the default pas
 
 1. Change the default password and select **F10: Save**.
 
-### Setup the BIOS and RAID array
+### Set up the BIOS and RAID array
 
 This procedure describes how to configure the BIOS configuration for an unconfigured sensor appliance.
-In the event that any of the steps below are missing in the BIOS, please make sure that the hardware matches the specifications above.
+If any of the steps below are missing in the BIOS make sure that the hardware matches the specifications above.
 
-HPE BIOS iLO is a system management software designed to give administrators control of HPE hardware remotely. It allows administrators to monitor system performance, configure settings, and troubleshoot hardware issues from a web browser. It can also be used to update system BIOS and firmware. The BIOS can be setup locally or remotely. To setup the BIOS remotely from a management computer, you need to define the HPE IP address and the management computer's IP address on the same subnet.
+HPE BIOS iLO is a system management software designed to give administrators control of HPE hardware remotely. It allows administrators to monitor system performance, configure settings, and troubleshoot hardware issues from a web browser. It can also be used to update system BIOS and firmware. The BIOS can be set up locally or remotely. To set up the BIOS remotely from a management computer, you need to define the HPE IP address and the management computer's IP address on the same subnet.
 
 
 **To configure the HPE BIOS**:

articles/defender-for-iot/organizations/appliance-catalog/hpe-proliant-dl20-plus-smb.md

@@ -45,7 +45,7 @@ The following image shows a sample of the HPE ProLiant DL20 Gen10 back panel:
 |Power|Hot Plug Power Supply 290 W|
 |Rack support|HPE 1U Short Friction Rail Kit|
 
-## DL20 Gen10 Plus (NHP 2LFF) - Bill of Materials
+## DL20 Gen10 Plus (NHP 2LFF) - Bill of materials
 
 |Quantity|PN|Description|
 |----|---|----|