Skip to content

Commit ddffa37

Browse files
tarTech23tarTech23
committed
initial
1 parent a614e99 commit ddffa37

File tree

2 files changed

+178
-0
lines changed

2 files changed

+178
-0
lines changed

‎articles/defender-for-iot/organizations/appliance-catalog/hpe-proliant-dl20-gen11.md

Lines changed: 176 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,176 @@
1+
---
2+
title: HPE ProLiant DL20 Gen 11 (4SFF) for OT monitoring in SMB/ L500 deployments - Microsoft Defender for IoT
3+
description: Learn about the HPE ProLiant DL20 Gen 11 Plus appliance when used for OT monitoring with Microsoft Defender for IoT in SMB deployments.
4+
ms.date: 04/09/2024
5+
ms.topic: reference
6+
---
7+
8+
# HPE ProLiant DL20 Gen 11 (4SFF)
9+
10+
This article describes the **HPE ProLiant DL20 Gen 11** appliance for OT sensors monitoring production lines.
11+
12+
The HPE ProLiant DL20 Gen11 is also available for the on-premises management console.
13+
14+
| Appliance characteristic |Details |
15+
|---------|---------|
16+
|**Hardware profile** | L500 |
17+
|**Performance** | Max bandwidth: 200 Mbps <br>Max devices: 1,000<br> Up to 8x monitoring ports |
18+
|**Physical specifications** | Mounting: 1U <br> Minimum dimensions (H x W x D) 1.70 x 17.11 x 15.05 in<br>Minimum dimensions (H x W x D) 4.32 x 43.46 x 38.22 cm|
19+
|**Status** | Supported, available pre-configured |
20+
21+
## Specifications
22+
23+
|Component|Technical specifications|
24+
|----|----|
25+
|Chassis|1U rack server|
26+
|Physical Characteristics | HPE DL20 Gen11 4SFF Ht Plg CTO Server |
27+
|Processor| Intel Xeon E-2434 3.4GHz 4-core 55W FIO Processor for HPE |
28+
|Chipset|Intel C262 |
29+
|Memory|2 x 16-GB Single Rank x8 DDR5-4800 CAS-40-39-39<br>Unbuffered Standard Memory Kit|
30+
|Storage|HPE 4 x 1.2 TB SAS 12G Mission Critical 10K SFF |
31+
|Network controller|On-board: 4 x 1 Gb|
32+
|External| 1 x Broadcom BCM5719 Ethernet 1Gb 4-port BASE-T Adapter for HPE|
33+
|On-board| iLO Port Card 1 Gb|
34+
|Management|HPE iLO Advanced|
35+
|Device access| Front: One USB 3.2 1 x USB iLO Service Port<br> Rear: Four USBs 3.2|
36+
|Internal| One USB 3.2|
37+
|Power|HPE 1000W Flex Slot Titanium Hot Plug Redundant |
38+
|Rack support|HPE 1U Short Friction Rail Kit |
39+
40+
## DL20 Gen11 (4SFF) - Bill of Materials
41+
42+
|Quantity|PN|Description|
43+
|----|---|----|
44+
|1| P65392-B21 | HPE ProLiant DL20 Genl 1 4SFF Hot Plug Configure-to-order Server|
45+
|1| P65392-B21 B19 | HPE DL20 Genl 14SFF Ht Plg CTO Server |
46+
|1| P65224-B21 | Intel Xcon E-2434 3.4GHz 4-core 55W FIO Processor for HPE|
47+
|2| P64336-B21 | HPE 16 GB (1 x 16 GB) Single Rank x8 DDR5-4800 CAS-40-39-39 Unbuffered Standard Memory Kit|
48+
|4| P28586-B21 | HPE 1.2 TB SAS 12 G Mission Critical 10K SFF BC 3-year Warranty Multi Vendor HDD |
49+
|1| P52753-B21 | HPE ProLiant DL320 Genll x 16 FHHL Riser Kit|
50+
|1| P51178-B21 | Broadcom BCM5719 Ethernet 1 Gb 4-port BASE-T Adapter for HPE |
51+
|1| P47789-B21 | HPE MRi-o Genl 1 x 16 Lanes without Cache OCP SPDM Storage Controller |
52+
|2| P03178-B21 | HPE 1000W Flex Slot Titanium Hot Plug Power Supply Kit|
53+
|1| BD505A | HPE iLO Advanced 1-server License with yr Support on iLO Licensed Features |
54+
|1| P65412-B21 | HPE ProLiant DL20 Genl 1 2LFF/4SFF OCP Cable Kit |
55+
|1| P64576-B21 | HPE Easy Install Rail 12 Kit |
56+
|1| P65407-B21 | HPE ProLiant DL20 GenIILP iLO/M.2 Enablement Kit |
57+
58+
<!-- UP to here port expansion-->
59+
## Optional Storage Controllers
60+
61+
Multi-disk RAID arrays combine multiple physical drives into one logical drive for increased redundancy and performance. The optional modules below have been tested in our lab for compatibility and sustained performance:
62+
63+
|Quantity|PN|Description|
64+
|----|---|----|
65+
|1| 869079-B21 | HPE Smart Array E208i-a SR G10 LH Ctrlr (RAID10) |
66+
|1| P26325-B21 | Broadcom MegaRAID MR216i-a x16 Lanes without Cache NVMe/SAS 12G Controller (RAID5)<br><br>**Note**: This RAID controller occupies the PCIe expansion slot and does not allow expansion of networking port expansion |
67+
68+
## Optional port expansion
69+
70+
Optional modules for port expansion include:
71+
72+
|Location |Type|Specifications|
73+
|--------------|--------------|---------|
74+
| PCI Slot 1 (Low profile) | DP F/O NIC |P26262-B21 - Broadcom BCM57414 Ethernet 10/25Gb 2-port SFP28 Adapter for HPE |
75+
| PCI Slot 1 (Low profile) | DP F/O NIC |P28787-B21 - Intel X710-DA2 Ethernet 10-Gb 2-port SFP+ Adapter for HPE |
76+
| PCI Slot 2 (High profile) | Quad Port Ethernet NIC| P21106-B21 - Intel I350-T4 Ethernet 1-Gb 4-port BASE-T Adapter for HPE |
77+
| PCI Slot 2 (High profile) | DP F/O NIC |P26262-B21 - Broadcom BCM57414 Ethernet 10/25 Gb 2-port SFP28 Adapter for HPE |
78+
| PCI Slot 2 (High profile) | DP F/O NIC |P28787-B21 - Intel X710-DA2 Ethernet 10-Gb 2-port SFP+ Adapter for HPE |
79+
| SFPs for Fiber Optic NICs|MultiMode, Short Range|455883-B21 - HPE BLc 10G SFP+ SR Transceiver|
80+
| SFPs for Fiber Optic NICs|SingleMode, Long Range | 455886-B21 - HPE BLc 10G SFP+ LR Transceiver|
81+
82+
## HPE ProLiant DL20 Gen 11 installation
83+
84+
This section describes how to install Defender for IoT software on the HPE ProLiant DL20 Gen10 Plus appliance.
85+
86+
Installation includes:
87+
88+
- Enabling remote access and updating the default administrator password
89+
- Configuring iLO port on network port 1
90+
- Configuring BIOS and RAID10 settings
91+
- Installing Defender for IoT software
92+
93+
> [!NOTE]
94+
> Installation procedures are only relevant if you need to re-install software on a pre-configured device, or if you buy your own hardware and configure the appliance yourself.
95+
>
96+
97+
### Enable remote access and update the password
98+
99+
Use the following procedure to set up network options and update the default password.
100+
101+
**To enable, and update the password**:
102+
103+
1. Connect a screen and a keyboard to the HPE appliance, turn on the appliance, and press **F9**.
104+
105+
:::image type="content" source="../media/tutorial-install-components/hpe-proliant-screen-v2.png" alt-text="Screenshot that shows the HPE ProLiant window.":::
106+
107+
1. Go to **System Utilities** > **System Configuration** > **iLO 5 Configuration Utility** > **Network Options**.
108+
109+
:::image type="content" source="../media/tutorial-install-components/system-configuration-window-v2.png" alt-text="Screenshot that shows the System Configuration window.":::
110+
111+
1. Select **Shared Network Port-LOM** from the **Network Interface Adapter** field.
112+
113+
1. Set **Enable DHCP** to **Off**.
114+
115+
1. Enter the IP address, subnet mask, and gateway IP address.
116+
117+
1. Select **F10: Save**.
118+
119+
1. Select **Esc** to get back to the **iLO 5 Configuration Utility**, and then select **User Management**.
120+
121+
1. Select **Edit/Remove User**. The administrator is the only default user defined.
122+
123+
1. Change the default password and select **F10: Save**.
124+
125+
### Setup the BIOS and RAID array
126+
127+
This procedure describes how to configure the BIOS configuration for an unconfigured sensor appliance.
128+
In the event that any of the steps below are missing in the BIOS, please make sure that the hardware matches the specifications above.
129+
130+
HPE BIOS iLO is a system management software designed to give administrators control of HPE hardware remotely. It allows administrators to monitor system performance, configure settings, and troubleshoot hardware issues from a web browser. It can also be used to update system BIOS and firmware. The BIOS can be setup locally or remotely. To setup the BIOS remotely from a management computer, you need to define the HPE IP address and the management computer's IP address on the same subnet.
131+
132+
133+
**To configure the HPE BIOS**:
134+
135+
1. Select **System Utilities** > **System Configuration** > **BIOS/Platform Configuration (RBSU)**.
136+
137+
1. In the **BIOS/Platform Configuration (RBSU)** form, select **Boot Options**.
138+
139+
1. Change **Boot Mode** to **UEFI BIOS Mode**, and then select **F10: Save**.
140+
141+
1. Select **Esc** twice to close the **System Configuration** form.
142+
143+
1. Select **Embedded RAID 1: HPE Smart Array E208i-a SR Gen 10** > **Array Configuration** > **Create Array**.
144+
145+
1. In the **Create Array** form, select all four disk options, and on the next page select **RAID10**.
146+
147+
> [!NOTE]
148+
> For **Data-at-Rest** encryption, see HPE guidance for activating RAID SR Secure Encryption or using Self-Encrypting-Drives (SED).
149+
>
150+
151+
[!INCLUDE [install iLO remotely from virtual drive and change timeout settings](../includes/ilo-remote-install-hpe.md)]
152+
153+
### Install Defender for IoT software on the HPE ProLiant DL20 Gen11
154+
155+
This procedure describes how to install Defender for IoT software on the HPE ProLiant DL20 Gen10 Plus.
156+
157+
The installation process takes about 20 minutes. After the installation, the system is restarted several times.
158+
159+
**To install Defender for IoT software**:
160+
161+
1. Connect the screen and keyboard to the appliance, and then connect to the CLI.
162+
163+
1. Connect an external CD or disk-on-key that contains the software you downloaded from the Azure portal.
164+
165+
1. Start the appliance.
166+
167+
1. Continue with the generic procedure for installing Defender for IoT software. For more information, see [Defender for IoT software installation](../how-to-install-software.md).
168+
169+
## Next steps
170+
171+
Continue understanding system requirements for physical or virtual appliances. For more information, see [Which appliances do I need?](../ot-appliance-sizing.md).
172+
173+
Then, use any of the following procedures to continue:
174+
175+
- [Download software for an OT sensor](../ot-deploy/install-software-ot-sensor.md#download-software-files-from-the-azure-portal)
176+
- [Download software files for an on-premises management console](../legacy-central-management/install-software-on-premises-management-console.md#download-software-files-from-the-azure-portal)

‎articles/defender-for-iot/organizations/appliance-catalog/index.yml

Lines changed: 2 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -29,6 +29,8 @@ landingContent:
2929
links:
3030
- text: HPE ProLiant DL20 Gen10 Plus (4SFF)
3131
url: hpe-proliant-dl20-plus-enterprise.md
32+
- text: HPE ProLiant DL20 Gen11 (4SFF)
33+
url: hpe-proliant-dl20-gen11.md
3234
- text: Dell Edge 5200 (Rugged MIL-STD-810G)
3335
url: dell-edge-5200.md
3436
- text: Dell PowerEdge R350

0 commit comments

Comments
 (0)