Merge pull request #211485 from arielsaghiv/patch-79

Update hpe-proliant-dl360.md

Author: prmerger-automator[bot]

articles/defender-for-iot/organizations/appliance-catalog/hpe-proliant-dl360.md

@@ -73,14 +73,20 @@ Optional modules for port expansion include:
 
 |Location |Type|Specifications|
 |-------------- | --------------| --------- |
-| **PCI Slot 1 (Low profile)**| Quad Port Ethernet NIC| 811546-B21 - HPE 1 GbE 4p BASE-T I350 Adapter SI |
-| **PCI Slot 1 (Low profile)**  | DP F/O NIC|727054-B21 - HPE 10 GbE 2p FLR-SFP+ X710 Adapter|
-|**PCI Slot 2 (High profile)**| Quad Port Ethernet NIC|811546-B21 - HPE 1 GbE 4p BASE-T I350 Adapter SI|
-| **PCI Slot 2 (High profile)**|DP F/O NIC| 727054-B21 - HPE 10 GbE 2p FLR-SFP+ X710 Adapter|
-| **PCI Slot 2 (High profile)**|Quad Port F/O NIC| 869585-B21 - HPE 10 GbE 4p SFP+ X710 Adapter SI|
-| **SFPs for Fiber Optic NICs**|MultiMode, Short Range|455883-B21 - HPE BLc 10G SFP+ SR Transceiver|
+| **PCI Slot 1 (Low profile)**| Quad Port Ethernet NIC| 811546-B21 - HPE 1 GbE 4p BASE-T I350 Adapter SI (FW 1.52)|
+| **PCI Slot 1 (Low profile)**  | DP F/O NIC|727054-B21 - HPE 10 GbE 2p FLR-SFP+ X710 Adapter (FW 10.57.3)|
+|**PCI Slot 2 (High profile)**| Quad Port Ethernet NIC|811546-B21 - HPE 1 GbE 4p BASE-T I350 Adapter SI (FW 1.52)|
+|**PCI Slot 2 (High profile)**| Quad Port Ethernet NIC|647594-B21 - HPE 1 GbE 4p BASE-T BCM5719 Adapter (FW 5719-v1.45 NCSI v1.3.12.0 )|
+| **PCI Slot 2 (High profile)**|DP F/O NIC| 727055-B21 - HPE 10 GbE 2p FLR-SFP+ X710 Adapter (FW 10.57.3)|
+| **PCI Slot 2 (High profile)**|DP F/O NIC| P08421-B21 - HPE Ethernet 10Gb 2-port SFP+ BCM57414 Adapter (FW 214.4.9.6/pkg 214.0.286012)|
+| **PCI Slot 2 (High profile)**|Quad Port F/O NIC| 869585-B21 - HPE 10 GbE 4p SFP+ X710 Adapter SI (FW 10.57.3)|
+| **SFPs for Fiber Optic NICs**|MultiMode, Short Range| 455883-B21 - HPE BLc 10G SFP+ SR Transceiver|
 |**SFPs for Fiber Optic NICs**|SingleMode, Long Range | 455886-B21 -  HPE BLc 10G SFP+ LR Transceiver|
 
+> [!IMPORTANT]
+> Verify NIC cards run with the firmware version described above or later.
+> As described in the procedure below, it is also recommended to disable the LLDP Agent in the BIOS for each installed NIC.
+
 ## HPE ProLiant DL360 installation
 
 This section describes how to install OT sensor software on the HPE ProLiant DL360 appliance and includes adjusting the appliance's BIOS configuration.
@@ -124,9 +130,13 @@ Use the following procedure to set up network options and update the default pas
 This procedure describes how to update the HPE BIOS configuration for your OT sensor deployment.
 
 **To configure the HPE BIOS**:
+> [!IMPORTANT]
+> Please make sure your server is using the HPE SPP 2022.03.1 (BIOS version U32 v2.6.2) or later.
 
 1. Select **System Utilities** > **System Configuration** > **BIOS/Platform Configuration (RBSU)**.
 
+1. In the **BIOS/Ethernet Adapter/NIC Configuration**, disable LLDP Agent for all NIC cards.
+
 1. In the **BIOS/Platform Configuration (RBSU)** form, select **Boot Options**.
 
 1. Change **Boot Mode** to **Legacy BIOS Mode**, and then select **F10: Save**.
@@ -145,7 +155,7 @@ This procedure describes how to update the HPE BIOS configuration for your OT se
 
 This procedure describes how to install iLO software remotely from a virtual drive.
 
-**To install iLO software**:
+**To install sensor software with iLO**:
 
 1. Sign in to the iLO console, and then right-click the servers' screen.
 
@@ -155,7 +165,7 @@ This procedure describes how to install iLO software remotely from a virtual dri
 
 1. Select **Local ISO file**.
 
-1. In the dialog box, choose the relevant ISO file.
+1. In the dialog box, choose the D4IoT sensor installation ISO file.
 
 1. Go to the left icon, select **Power**, and the select **Reset**.