Merge branch 'master' into patch-271

Author: Kateyanne

exchange/docs-conceptual/exchange-online-powershell-v2.md

@@ -78,12 +78,12 @@ Miscellaneous Exchange Online cmdlets that happen to be in the EXO V2 module are
 
 ****
 
-|EXO V2 module cmdlet|Older related cmdlet|
+|EXO V2 module cmdlet|Comments|
 |---|---|
-|[Get-MyAnalyticsFeatureConfig](https://docs.microsoft.com/powershell/module/exchange/get-myanalyticsfeatureconfig)||
-|[Set-MyAnalyticsFeatureConfig](https://docs.microsoft.com/powershell/module/exchange/set-myanalyticsfeatureconfig)||
-|[Get-UserBriefingConfig](https://docs.microsoft.com/powershell/module/exchange/get-userbriefingconfig)|n/a|
-|[Set-UserBriefingConfig](https://docs.microsoft.com/powershell/module/exchange/set-userbriefingconfig)|n/a|
+|[Get-MyAnalyticsFeatureConfig](https://docs.microsoft.com/powershell/module/exchange/get-myanalyticsfeatureconfig)|Available in the version 2.0.4-Preview3 version of the module.|
+|[Set-MyAnalyticsFeatureConfig](https://docs.microsoft.com/powershell/module/exchange/set-myanalyticsfeatureconfig)|Available in the version 2.0.4-Preview3 version of the module.|
+|[Get-UserBriefingConfig](https://docs.microsoft.com/powershell/module/exchange/get-userbriefingconfig)|This cmdlet is being replaced by **Get-MyAnalyticsFeatureConfig**.|
+|[Set-UserBriefingConfig](https://docs.microsoft.com/powershell/module/exchange/set-userbriefingconfig)|This cmdlet is being replaced by **Set-MyAnalyticsFeatureConfig**|
 |
 
 ## Install and maintain the EXO V2 module

exchange/exchange-ps/exchange/Get-UserBriefingConfig.md

@@ -14,6 +14,8 @@ ms.author: chrisda
 ## SYNOPSIS
 This cmdlet is available only in the Exchange Online PowerShell V2 module. For more information, see [Connect to Exchange Online PowerShell](https://docs.microsoft.com/powershell/exchange/connect-to-exchange-online-powershell).
 
+**Note**: This cmdlet is being replaced by the [Get-MyAnalyticsFeatureConfig](https://docs.microsoft.com/powershell/module/exchange/get-myanalyticsfeatureconfig) cmdlet.
+
 Use the Get-UserBriefingConfig cmdlet to get the current state of the Briefing email flag for the specified user. For more details about configuring the Briefing email, see [Configure Briefing email](https://docs.microsoft.com/Briefing/be-admin).
 
 For information about the parameter sets in the Syntax section below, see [Exchange cmdlet syntax](https://docs.microsoft.com/powershell/exchange/exchange-cmdlet-syntax).

exchange/exchange-ps/exchange/New-ApplicationAccessPolicy.md

@@ -35,6 +35,8 @@ You need to be assigned permissions before you can run this cmdlet. Although thi
 
 Use the New-ApplicationAccessPolicy cmdlet to restrict or deny access for an application that is using Outlook REST APIs or Microsoft Graph APIs to a specific set of mailboxes. These policies are complimentary to the permission scopes that are declared by the application.
 
+A limit of 100 policies per Microsoft 365 tenant is enforced as of today. An error message stating "A tenant cannot have more than 100 policies." will be displayed if this number is exceeded.
+
 While the scope-based resource access like Mail.Read or Calendar.Read is effective to ensure that the application can only read mails or events within a mailbox and not do anything else; Application Access Policy feature allows admins to enforce limits that are based on a list of mailboxes. For example, in a global organization apps developed for one country shouldn’t have access to data from other countries or a CRM integration application should only access calendar of the Sales organization and no other departments.
 
 Every API request using the Outlook REST APIs or Microsoft Graph APIs to a target mailbox done by an application is verified using the following rules (in the same order):

exchange/exchange-ps/exchange/Set-OwaMailboxPolicy.md

@@ -1012,19 +1012,15 @@ Accept wildcard characters: False
 ```
 
 ### -FreCardsEnabled
-This parameter is available only in the cloud-based service.
-
-The FreCardsEnabled parameter specifies whether the theme, signature, and phone cards are available in Outlook on the web. Valid values are:
-
-- $true: The theme, signature, and phone cards are visible in Outlook on the web. This is the default value.
+This parameter is available only in on-premises Exchange.
 
-- $false: The theme, signature, and phone cards aren't visible in Outlook on the web. Only the introduction, time zone, and final cards are visible.
+This parameter is reserved for internal Microsoft use.
 
 ```yaml
 Type: Boolean
 Parameter Sets: (All)
 Aliases:
-Applicable: Exchange Online
+Applicable: Exchange Server 2016, Exchange Server 2019
 
 Required: False
 Position: Named

exchange/exchange-ps/exchange/Set-UserBriefingConfig.md

@@ -14,6 +14,8 @@ ms.author: chrisda
 ## SYNOPSIS
 This cmdlet is available only in the Exchange Online PowerShell V2 module. For more information, see [Connect to Exchange Online PowerShell](https://docs.microsoft.com/powershell/exchange/connect-to-exchange-online-powershell).
 
+**Note**: This cmdlet is being replaced by the [Set-MyAnalyticsFeatureConfig](https://docs.microsoft.com/powershell/module/exchange/set-myanalyticsfeatureconfig) cmdlet.
+
 Use the Set-UserBriefingConfig cmdlet to enable or disable the Briefing for a user. For more details about configuring the Briefing, see [Configure Briefing email](https://docs.microsoft.com/Briefing/be-admin).
 
 For information about the parameter sets in the Syntax section below, see [Exchange cmdlet syntax](https://docs.microsoft.com/powershell/exchange/exchange-cmdlet-syntax).

skype/skype-ps/skype/Get-CsHuntGroup.md

@@ -28,6 +28,9 @@ If called without parameters, Get-CsHuntgroup returns a collection of all Call Q
 
 The Get-CsHuntGroup cmdlet may suggest additional steps required to complete the Call Queue setup.
 
+Please Note: This cmdlet is part of the first generation provisioning and is no longer supported. Please use the cmdlets which follow this format "*-CsCallQueue*" instead.
+
+
 ## EXAMPLES
 
 ### -------------------------- Example 1 --------------------------

skype/skype-ps/skype/New-CsHuntGroup.md

@@ -35,6 +35,8 @@ The New-CsHuntGroup cmdlet may suggest additional steps required to complete the
 
 The following parameters are not applicable to Skype for Business Online: ClientAudience, DomainController, Force, HuntGroupServiceCallbackUri, PipelineVariable, and Ring.
 
+Please Note: This cmdlet is part of the first generation provisioning and is no longer supported. Please use the cmdlets which follow this format "*-CsCallQueue*" instead.
+
 
 ## EXAMPLES
 

skype/skype-ps/skype/Remove-CsHuntGroup.md

@@ -26,6 +26,8 @@ The Remove-CsHuntGroup cmdlet deletes an existing Call Queue specified by the Pr
 
 The Remove-CsHuntGroup cmdlet may suggest additional steps required to complete the Call Queue setup.
 
+Please Note: This cmdlet is part of the first generation provisioning and is no longer supported. Please use the cmdlets which follow this format "*-CsCallQueue*" instead.
+
 ## EXAMPLES
 
 ### -------------------------- Example 1 --------------------------

skype/skype-ps/skype/Set-CsHuntGroup.md

@@ -34,6 +34,8 @@ The Set-CsHuntGroup cmdlet may suggest additional steps required to complete the
 
 The following parameters are not applicable to Skype for Business Online: ClientAudience, DomainController, Force, HuntGroupServiceCallbackUri, and PipelineVariable
 
+Please Note: This cmdlet is part of the first generation provisioning and is no longer supported. Please use the cmdlets which follow this format "*-CsCallQueue*" instead.
+
 ## EXAMPLES
 
 ### -------------------------- Example 1 --------------------------