Merge pull request #12016 from MicrosoftDocs/chrisda

Blind cmdlet sweep EOP and S&C

Author: chrisda

exchange/exchange-ps/exchange/Get-ComplianceTagStorage.md

@@ -22,6 +22,7 @@ For information about the parameter sets in the Syntax section below, see [Excha
 
 ```
 Get-ComplianceTagStorage [[-Identity] <PolicyIdParameter>]
+ [-Organization <OrganizationIdParameter>]
  [<CommonParameters>]
 ```
 
@@ -61,6 +62,22 @@ Accept pipeline input: True
 Accept wildcard characters: False
 ```
 
+### -Organization
+This parameter is reserved for internal Microsoft use.
+
+```yaml
+Type: OrganizationIdParameter
+Parameter Sets: (All)
+Aliases:
+Applicable: Security & Compliance
+
+Required: False
+Position: Named
+Default value: None
+Accept pipeline input: False
+Accept wildcard characters: False
+```
+
 ### CommonParameters
 This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see [about_CommonParameters](https://go.microsoft.com/fwlink/p/?LinkID=113216).
 

exchange/exchange-ps/exchange/Get-PhishSimOverridePolicy.md

@@ -1,7 +1,7 @@
 ---
 external help file: Microsoft.Exchange.TransportMailflow-Help.xml
 online version: https://learn.microsoft.com/powershell/module/exchange/get-phishsimoverridepolicy
-applicable: Exchange Online, Security & Compliance, Exchange Online Protection
+applicable: Exchange Online
 title: Get-PhishSimOverridePolicy
 schema: 2.0.0
 author: chrisda
@@ -50,7 +50,7 @@ The Identity parameter specifies the phishing simulation override policy that yo
 Type: PolicyIdParameter
 Parameter Sets: (All)
 Aliases:
-Applicable: Exchange Online, Security & Compliance, Exchange Online Protection
+Applicable: Exchange Online
 
 Required: False
 Position: 0
@@ -66,7 +66,7 @@ This parameter is reserved for internal Microsoft use.
 Type: Fqdn
 Parameter Sets: (All)
 Aliases:
-Applicable: Exchange Online, Exchange Online Protection
+Applicable: Exchange Online
 
 Required: False
 Position: Named

exchange/exchange-ps/exchange/Get-RoleGroup.md

@@ -24,7 +24,6 @@ For information about the parameter sets in the Syntax section below, see [Excha
 Get-RoleGroup [[-Identity] <RoleGroupIdParameter>]
  [-DomainController <Fqdn>]
  [-Filter <String>]
- [-Organization <OrganizationIdParameter>]
  [-ReadFromDomainController]
  [-ResultSize <Unlimited>]
  [-ShowPartnerLinked]
@@ -139,24 +138,6 @@ Accept pipeline input: False
 Accept wildcard characters: False
 ```
 
-### -Organization
-This parameter is available only in the cloud-based service.
-
-This parameter is reserved for internal Microsoft use.
-
-```yaml
-Type: OrganizationIdParameter
-Parameter Sets: (All)
-Aliases:
-Applicable: Security & Compliance
-
-Required: False
-Position: Named
-Default value: None
-Accept pipeline input: False
-Accept wildcard characters: False
-```
-
 ### -ReadFromDomainController
 This parameter is available only in on-premises Exchange.
 

exchange/exchange-ps/exchange/Get-SecOpsOverridePolicy.md

@@ -1,7 +1,7 @@
 ---
 external help file: Microsoft.Exchange.TransportMailflow-Help.xml
 online version: https://learn.microsoft.com/powershell/module/exchange/get-secopsoverridepolicy
-applicable: Exchange Online, Security & Compliance, Exchange Online Protection
+applicable: Exchange Online
 title: Get-SecOpsOverridePolicy
 schema: 2.0.0
 author: chrisda
@@ -52,7 +52,7 @@ The Identity parameter specifies the SecOps override policy that you want to mod
 Type: PolicyIdParameter
 Parameter Sets: (All)
 Aliases:
-Applicable: Exchange Online, Security & Compliance, Exchange Online Protection
+Applicable: Exchange Online
 
 Required: False
 Position: 0
@@ -68,7 +68,7 @@ This parameter is reserved for internal Microsoft use.
 Type: Fqdn
 Parameter Sets: (All)
 Aliases:
-Applicable: Exchange Online, Exchange Online Protection
+Applicable: Exchange Online
 
 Required: False
 Position: Named

exchange/exchange-ps/exchange/Get-SweepRule.md

@@ -1,7 +1,7 @@
 ---
 external help file: Microsoft.Exchange.TransportMailflow-Help.xml
 online version: https://learn.microsoft.com/powershell/module/exchange/get-sweeprule
-applicable: Exchange Server 2016, Exchange Server 2019, Exchange Online
+applicable: Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection
 title: Get-SweepRule
 schema: 2.0.0
 author: chrisda

exchange/exchange-ps/exchange/New-DlpCompliancePolicy.md

@@ -26,6 +26,7 @@ New-DlpCompliancePolicy [-Name] <String>
  [-Confirm]
  [-EndpointDlpAdaptiveScopes <MultiValuedProperty>]
  [-EndpointDlpAdaptiveScopesException <MultiValuedProperty>]
+ [-EndpointDlpExtendedLocations <String>]
  [-EndpointDlpLocation <MultiValuedProperty>]
  [-EndpointDlpLocationException <MultiValuedProperty>]
  [-ExceptIfOneDriveSharedBy <RecipientIdParameter[]>]
@@ -177,6 +178,22 @@ Accept pipeline input: False
 Accept wildcard characters: False
 ```
 
+### -EndpointDlpExtendedLocations
+{{ Fill EndpointDlpExtendedLocations Description }}
+
+```yaml
+Type: String
+Parameter Sets: (All)
+Aliases:
+Applicable: Security & Compliance
+
+Required: False
+Position: Named
+Default value: None
+Accept pipeline input: False
+Accept wildcard characters: False
+```
+
 ### -EndpointDlpLocation
 **Note**: This parameter requires membership in the Compliance Administrator or Compliance Data Administrator roles in Microsoft Entra ID.
 

exchange/exchange-ps/exchange/New-DlpComplianceRule.md

@@ -31,6 +31,7 @@ New-DlpComplianceRule [-Name] <String> -Policy <PolicyIdParameter>
  [-AnyOfRecipientAddressMatchesPatterns <MultiValuedProperty>]
  [-ApplyBrandingTemplate <String>]
  [-ApplyHtmlDisclaimer <PswsHashtable>]
+ [-AttachmentIsNotLabeled <Boolean>]
  [-BlockAccess <Boolean>]
  [-BlockAccessScope <Microsoft.Office.CompliancePolicy.Tasks.BlockAccessScope>]
  [-Comment <String>]
@@ -114,8 +115,10 @@ New-DlpComplianceRule [-Name] <String> -Policy <PolicyIdParameter>
  [-HeaderMatchesPatterns <PswsHashtable>]
  [-ImmutableId <System.Guid>]
  [-IncidentReportContent <ReportContentOption[]>]
+ [-MessageIsNotLabeled <Boolean>]
  [-MessageSizeOver <Microsoft.Exchange.Data.ByteQuantifiedSize>]
  [-MessageTypeMatches <Microsoft.Office.CompliancePolicy.PolicyEvaluation.MessageTypes>]
+ [-MipRestrictAccess <PswsHashtable[]>]
  [-Moderate <PswsHashtable>]
  [-ModifySubject <PswsHashtable>]
  [-NonBifurcatingAccessScope <Microsoft.Office.CompliancePolicy.Tasks.NonBifurcatingAccessScope>]
@@ -126,6 +129,7 @@ New-DlpComplianceRule [-Name] <String> -Policy <PolicyIdParameter>
  [-NotifyEmailExchangeIncludeAttachment <Boolean>]
  [-NotifyEndpointUser <PswsHashtable>]
  [-NotifyOverrideRequirements <Microsoft.Office.CompliancePolicy.PolicyEvaluation.PolicyOverrideRequirements>]
+ [-NotifyPolicyTipCustomDialog <String>]
  [-NotifyPolicyTipCustomText <String>]
  [-NotifyPolicyTipCustomTextTranslations <MultiValuedProperty>]
  [-NotifyPolicyTipDisplayOption <Microsoft.Office.CompliancePolicy.PolicyEvaluation.PolicyTipDisplayOption>]
@@ -513,6 +517,22 @@ Accept pipeline input: False
 Accept wildcard characters: False
 ```
 
+### -AttachmentIsNotLabeled
+{{ Fill AttachmentIsNotLabeled Description }}
+
+```yaml
+Type: Boolean
+Parameter Sets: (All)
+Aliases:
+Applicable: Security & Compliance
+
+Required: False
+Position: Named
+Default value: None
+Accept pipeline input: False
+Accept wildcard characters: False
+```
+
 ### -BlockAccess
 The BlockAccess parameter specifies an action for the DLP rule that blocks access to the source item when the conditions of the rule are met. Valid values are:
 
@@ -2296,6 +2316,22 @@ Accept pipeline input: False
 Accept wildcard characters: False
 ```
 
+### -MessageIsNotLabeled
+{{ Fill MessageIsNotLabeled Description }}
+
+```yaml
+Type: Boolean
+Parameter Sets: (All)
+Aliases:
+Applicable: Security & Compliance
+
+Required: False
+Position: Named
+Default value: None
+Accept pipeline input: False
+Accept wildcard characters: False
+```
+
 ### -MessageSizeOver
 The MessageSizeOver parameter specifies a condition for the DLP rule that looks for messages larger than the specified size. The size include the message and all attachments.
 
@@ -2351,6 +2387,22 @@ Accept pipeline input: False
 Accept wildcard characters: False
 ```
 
+### -MipRestrictAccess
+{{ Fill MipRestrictAccess Description }}
+
+```yaml
+Type: PswsHashtable[]
+Parameter Sets: (All)
+Aliases:
+Applicable: Security & Compliance
+
+Required: False
+Position: Named
+Default value: None
+Accept pipeline input: False
+Accept wildcard characters: False
+```
+
 ### -Moderate
 The Moderate parameter specifies an action for the DLP rule that sends the email message to a moderator. This parameter uses the syntax: `@{ModerateMessageByManager = <$true | $false>; ModerateMessageByUser = "emailaddress1,emailaddress2,...emailaddressN"}`.
 
@@ -2545,6 +2597,22 @@ Accept pipeline input: False
 Accept wildcard characters: False
 ```
 
+### -NotifyPolicyTipCustomDialog
+{{ Fill NotifyPolicyTipCustomDialog Description }}
+
+```yaml
+Type: String
+Parameter Sets: (All)
+Aliases:
+Applicable: Security & Compliance
+
+Required: False
+Position: Named
+Default value: None
+Accept pipeline input: False
+Accept wildcard characters: False
+```
+
 ### -NotifyPolicyTipCustomText
 The NotifyPolicyTipCustomText parameter specifies the custom text in the Policy Tip notification message that's shown to recipients when the conditions of the rule are met. The maximum length is 256 characters. HTML tags and tokens (variables) aren't supported.
 

exchange/exchange-ps/exchange/New-InformationBarrierPolicy.md

@@ -26,6 +26,7 @@ New-InformationBarrierPolicy [-Name] <String> -AssignedSegment <String> -Segment
  [-Comment <String>]
  [-Confirm]
  [-Force]
+ [-ModerationAllowed <Boolean>]
  [-State <EopInformationBarrierPolicyState>]
  [-WhatIf]
  [<CommonParameters>]
@@ -37,6 +38,7 @@ New-InformationBarrierPolicy [-Name] <String> -AssignedSegment <String> -Segment
  [-Comment <String>]
  [-Confirm]
  [-Force]
+ [-ModerationAllowed <Boolean>]
  [-WhatIf]
  [<CommonParameters>]
 ```
@@ -47,6 +49,7 @@ New-InformationBarrierPolicy [-Name] <String> -AssignedSegment <String> -Segment
  [-Comment <String>]
  [-Confirm]
  [-Force]
+ [-ModerationAllowed <Boolean>]
  [-WhatIf]
  [<CommonParameters>]
 ```
@@ -224,6 +227,22 @@ Accept pipeline input: False
 Accept wildcard characters: False
 ```
 
+### -ModerationAllowed
+{{ Fill ModerationAllowed Description }}
+
+```yaml
+Type: Boolean
+Parameter Sets: (All)
+Aliases:
+Applicable: Security & Compliance
+
+Required: False
+Position: Named
+Default value: None
+Accept pipeline input: False
+Accept wildcard characters: False
+```
+
 ### -State
 The State parameter specifies whether the information barrier policy is active or inactive. Valid values are:
 

exchange/exchange-ps/exchange/New-PhishSimOverridePolicy.md

@@ -1,7 +1,7 @@
 ---
 external help file: Microsoft.Exchange.TransportMailflow-Help.xml
 online version: https://learn.microsoft.com/powershell/module/exchange/new-phishsimoverridepolicy
-applicable: Exchange Online, Security & Compliance, Exchange Online Protection
+applicable: Exchange Online
 title: New-PhishSimOverridePolicy
 schema: 2.0.0
 author: chrisda
@@ -52,7 +52,7 @@ The Name parameter specifies the name for the phishing simulation override polic
 Type: String
 Parameter Sets: (All)
 Aliases:
-Applicable: Exchange Online, Security & Compliance, Exchange Online Protection
+Applicable: Exchange Online
 
 Required: True
 Position: 0
@@ -68,7 +68,7 @@ The Comment parameter specifies an optional comment. If you specify a value that
 Type: String
 Parameter Sets: (All)
 Aliases:
-Applicable: Exchange Online, Security & Compliance, Exchange Online Protection
+Applicable: Exchange Online
 
 Required: False
 Position: Named
@@ -87,7 +87,7 @@ The Confirm switch specifies whether to show or hide the confirmation prompt. Ho
 Type: SwitchParameter
 Parameter Sets: (All)
 Aliases: cf
-Applicable: Exchange Online, Security & Compliance, Exchange Online Protection
+Applicable: Exchange Online
 
 Required: False
 Position: Named
@@ -103,7 +103,7 @@ This parameter is reserved for internal Microsoft use.
 Type: Fqdn
 Parameter Sets: (All)
 Aliases:
-Applicable: Exchange Online, Exchange Online Protection
+Applicable: Exchange Online
 
 Required: False
 Position: Named
@@ -122,7 +122,7 @@ The Enabled parameter specifies whether the policy is enabled. Valid values are:
 Type: Boolean
 Parameter Sets: (All)
 Aliases:
-Applicable: Exchange Online, Security & Compliance, Exchange Online Protection
+Applicable: Exchange Online
 
 Required: False
 Position: Named
@@ -140,7 +140,7 @@ You can use this switch to run tasks programmatically where prompting for admini
 Type: SwitchParameter
 Parameter Sets: (All)
 Aliases:
-Applicable: Exchange Online, Exchange Online Protection
+Applicable: Exchange Online
 
 Required: False
 Position: Named
@@ -158,7 +158,7 @@ The WhatIf switch doesn't work in Security & Compliance PowerShell.
 Type: SwitchParameter
 Parameter Sets: (All)
 Aliases: wi
-Applicable: Exchange Online, Security & Compliance, Exchange Online Protection
+Applicable: Exchange Online
 
 Required: False
 Position: Named