Merge branch 'master' into master

Author: abnan

exchange/docs-conceptual/exchange-online-powershell-v2.md

@@ -124,12 +124,28 @@ For instructions on installing PowerShell 7 on macOS, see [Installing PowerShell
 
 The EXO V2 module is officially supported in the following distributions of Linux:
 
-- Ubuntu 18.04/20.04
+- Ubuntu 18.04 LTS
+- Ubuntu 20.04 LTS
 
 If you have trouble using the EXO V2 module on other distributions of Linux, send email to the following address: `exocmdletpreview[at]service[dot]microsoft[dot]com`. The email address is purposefully obfuscated to avoid spam.
 
 For instructions on installing PowerShell 7 on Linux, see [Installing PowerShell on Linux](/powershell/scripting/install/installing-powershell-core-on-linux?view=powershell-7.1&preserve-view=true).
 
+After you install PowerShell 7, do the following steps:
+
+1. Run PowerShell as superuser: `sudo pwsh`
+2. In the PowerShell superuser session, run the following commands:
+
+   ```powershell
+   Install-Module -Name PSWSMan
+
+   Install-WSMan
+   ```
+
+   If prompted, accept PSGallery as the source for the cmdlets.
+
+Now you can do the [regular PowerShell prerequisites](#prerequisites-for-the-exo-v2-module) and [install the EXO V2 module](#install-the-exo-v2-module).
+
 #### Windows
 
 All versions of the EXO V2 module are supported in Windows PowerShell 5.1. PowerShell 7 on Windows requires version 2.0.4 or later of the EXO V2 module.

exchange/exchange-ps/exchange/New-OutboundConnector.md

@@ -35,7 +35,8 @@ New-OutboundConnector [-Name] <String>
  [-LinkForModifiedConnector <Guid>]
  [-RecipientDomains <MultiValuedProperty>]
  [-RouteAllMessagesViaOnPremises <Boolean>]
- [-SmartHosts <MultiValuedProperty>]
+ [-SenderRewritingEnabled <Boolean>]
+ [-SmartHosts <MultiValuedProperty>] 
  [-TestMode <Boolean>]
  [-TlsDomain <SmtpDomainWithSubdomains>]
  [-TlsSettings <TlsAuthLevel>]
@@ -288,6 +289,25 @@ Accept pipeline input: False
 Accept wildcard characters: False
 ```
 
+### -SenderRewritingEnabled
+The SenderRewritingEnabled parameter specifies that all messages that normally qualify for SRS rewritting are rewritten for traffic to on-premises. This parameter is only effective for OnPremises connectors as Partner connectors already have SRS rewritting enabled. Valid values are:
+
+- $true: Messages are rewritten by SRS if they need to be before being routed through the on-premises messaging system. This setting requires you to set the ConnectorType parameter to the value OnPremises in the same command.
+- $false: Messages aren't rewritten by SRS before being routed through the on-premises messaging system. This is the default value.
+
+```yaml
+Type: Boolean
+Parameter Sets: (All)
+Aliases:
+Applicable: Exchange Online, Exchange Online Protection
+
+Required: False
+Position: Named
+Default value: None
+Accept pipeline input: False
+Accept wildcard characters: False
+```
+
 ### -SmartHosts
 The SmartHosts parameter specifies the smart host that the Outbound connector uses to route mail. Valid values are:
 

exchange/exchange-ps/exchange/New-SafeLinksPolicy.md

@@ -42,6 +42,7 @@ New-SafeLinksPolicy [-Name] <String>
  [-TrackClicks <Boolean>]
  [-UseTranslatedNotificationText <Boolean>]
  [-WhatIf]
+ [-DisableUrlRewrite <Boolean>]
  [-WhiteListedUrls <String>]
  [<CommonParameters>]
 ```
@@ -170,6 +171,24 @@ Accept pipeline input: False
 Accept wildcard characters: False
 ```
 
+### -DisableUrlRewrite
+The DisableUrlRewrite parameter specifies whether to rewrite (wrap) URLs in email messages. Valid values are:
+
+- $true: URLs in messages are not rewritten, but messages are still scanned by Safe Links prior to delivery. Time of click checks on links are done using the Safe Links API in supported Outlook clients (currently, Outlook for Windows and Outlook for Mac). Typically, we don't recommend using this value.
+- $false: URLs in messages are rewritten. API checks still occur on unwrapped URLs in supported clients if the user is in a valid Safe Links policy. This is the default value.
+
+```yaml
+Type: Boolean
+Parameter Sets: (All)
+Aliases:
+
+Required: False
+Position: Named
+Default value: None
+Accept pipeline input: False
+Accept wildcard characters: False
+```
+
 ### -DoNotAllowClickThrough
 The DoNotAllowClickThrough parameter specifies whether to allow users to click through to the original URL on warning pages. Valid values are:
 

exchange/exchange-ps/exchange/Set-OutboundConnector.md

@@ -37,6 +37,7 @@ Set-OutboundConnector [-Identity] <OutboundConnectorIdParameter>
  [-Name <String>]
  [-RecipientDomains <MultiValuedProperty>]
  [-RouteAllMessagesViaOnPremises <Boolean>]
+ [-SenderRewritingEnabled <Boolean>] 
  [-SmartHosts <MultiValuedProperty>]
  [-TestMode <Boolean>]
  [-TlsDomain <SmtpDomainWithSubdomains>]
@@ -332,6 +333,25 @@ Accept pipeline input: False
 Accept wildcard characters: False
 ```
 
+### -SenderRewritingEnabled
+The SenderRewritingEnabled parameter specifies that all messages that normally qualify for SRS rewritting are rewritten for traffic to on-premises. This parameter is only effective for OnPremises connectors as Partner connectors already have SRS rewritting enabled. Valid values are:
+
+- $true: Messages are rewritten by SRS if they need to be before being routed through the on-premises messaging system. This setting requires you to set the ConnectorType parameter to the value OnPremises in the same command.
+- $false: Messages aren't rewritten by SRS before being routed through the on-premises messaging system. This is the default value.
+
+```yaml
+Type: Boolean
+Parameter Sets: (All)
+Aliases:
+Applicable: Exchange Online, Exchange Online Protection
+
+Required: False
+Position: Named
+Default value: None
+Accept pipeline input: False
+Accept wildcard characters: False
+```
+
 ### -SmartHosts
 The SmartHosts parameter specifies the smart host that the Outbound connector uses to route mail. Valid values are:
 

exchange/exchange-ps/exchange/Set-SafeLinksPolicy.md

@@ -41,6 +41,7 @@ Set-SafeLinksPolicy [-Identity] <SafeLinksPolicyIdParameter>
  [-TrackClicks <Boolean>]
  [-UseTranslatedNotificationText <Boolean>]
  [-WhatIf]
+ [-DisableUrlRewrite <Boolean>]
  [-WhiteListedUrls <String>]
  [<CommonParameters>]
 ```
@@ -389,6 +390,24 @@ Accept pipeline input: False
 Accept wildcard characters: False
 ```
 
+### -DisableUrlRewrite
+The DisableUrlRewrite parameter specifies whether to rewrite (wrap) URLs in email messages. Valid values are:
+
+- $true: URLs in messages are not rewritten, but messages are still scanned by Safe Links prior to delivery. Time of click checks on links are done using the Safe Links API in supported Outlook clients (currently, Outlook for Windows and Outlook for Mac). Typically, we don't recommend using this value.
+- $false: URLs in messages are rewritten. API checks still occur on unwrapped URLs in supported clients if the user is in a valid Safe Links policy. This is the default value.
+
+```yaml
+Type: Boolean
+Parameter Sets: (All)
+Aliases:
+
+Required: False
+Position: Named
+Default value: None
+Accept pipeline input: False
+Accept wildcard characters: False
+```
+
 ### -WhiteListedUrls
 This parameter has been deprecated. Use the DoNotRewriteUrls parameter instead.
 

exchange/exchange-ps/exchange/Set-UnifiedGroup.md

@@ -1136,10 +1136,12 @@ Accept wildcard characters: False
 ```
 
 ### -SubscriptionEnabled
-The SubscriptionEnabled switch specifies whether subscriptions to conversations and calendar events are enabled for the Microsoft 365 Group.
+The SubscriptionEnabled switch specifies whether the group owners can enable subscription to conversations and calendar events on the groups they own. This option can be set only in Exchange Online PowerShell.
 
 - To change the value to $true, use this switch without a value.
-- To change the value to $false, use this exact syntax: -SubscriptionEnabled:$false.
+- To change the value to $false, use this exact syntax: -SubscriptionEnabled:$false. The value of the AutoSubscribeNewMembers parameter must also be $false before you can use the value $false for this switch.
+
+**Note**: You should use the value $false for this parameter only if you intend to disable group owner ability to change subscription options on the group. Group owners will not be able to enable subscription options on the group settings using Outlook on the web or Outlook desktop. Group owners might see the error, "The group update is in progress" error when they try to enable Subscription option. Admins trying to enable Subscription from Microsoft admin center might also see error, "Can't save 'Send copies of group conversations and events to group member's inboxes' Either your assigned product license doesn't include Exchange Online or you have recently created this group and it's still not ready for management".
 
 ```yaml
 Type: SwitchParameter

exchange/exchange-ps/exchange/Test-ActiveSyncConnectivity.md

@@ -45,7 +45,7 @@ The Test-ActiveSyncConnectivity cmdlet tests Exchange ActiveSync connectivity by
 
 The first time you use this cmdlet, you might be required to create a test user. To create a test user, run the following command:
 
-& $env:ExchangeInstallPath\Scripts\New-TestCasConnectivityUser.ps1
+`& $env:ExchangeInstallPath\Scripts\New-TestCasConnectivityUser.ps1`
 
 The test results are displayed on-screen. The cmdlet returns the following information.