From 5afd58ee5d1f4811accf27b9a3811fb029e2128b Mon Sep 17 00:00:00 2001 From: paisvivekanand Date: Thu, 22 May 2025 16:43:28 +0530 Subject: [PATCH 1/2] Update Get-DistributionGroup.md Updated the description for newly added parameters --- .../exchange/Get-DistributionGroup.md | 24 ++++++++++++++----- 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/exchange/exchange-ps/exchange/Get-DistributionGroup.md b/exchange/exchange-ps/exchange/Get-DistributionGroup.md index 8a04e33eba..834cb478d0 100644 --- a/exchange/exchange-ps/exchange/Get-DistributionGroup.md +++ b/exchange/exchange-ps/exchange/Get-DistributionGroup.md @@ -240,7 +240,9 @@ Accept wildcard characters: False ### -IncludeAcceptMessagesOnlyFromDLMembersWithDisplayNames This parameter is available only in the cloud-based service. -{{ Fill IncludeAcceptMessagesOnlyFromDLMembersWithDisplayNames Description }} +The IncludeAcceptMessagesOnlyFromDLMembersWithDisplayNames switch retrieves the UPN/SMTP address and display name of all distribution group members who are explicitly allowed to send messages to the distribution group, as defined in the `AcceptMessagesOnlyFromDLMembers` property. If this switch is not specified, the `AcceptMessagesOnlyFromDLMembersWithDisplayNames` property will return an empty result. + +**Note:** This switch was introduced following a change where recipient names were replaced with GUIDs, to restore human-readable identifiers in the output. ```yaml Type: SwitchParameter @@ -258,7 +260,9 @@ Accept wildcard characters: False ### -IncludeAcceptMessagesOnlyFromSendersOrMembersWithDisplayNames This parameter is available only in the cloud-based service. -{{ Fill IncludeAcceptMessagesOnlyFromSendersOrMembersWithDisplayNames Description }} +The IncludeAcceptMessagesOnlyFromSendersOrMembersWithDisplayNames switch retrieves the UPN/SMTP address and display name of all recipients—whether individual senders or members of distribution groups—who are explicitly allowed to send messages to the distribution group, as defined in the `AcceptMessagesOnlyFromSendersOrMembers` property. If this switch is not specified, the `AcceptMessagesOnlyFromSendersOrMembersWithDisplayNames` property will return an empty result. + +**Note:** This switch was introduced following a change where recipient names were replaced with GUIDs, to restore human-readable identifiers in the output. ```yaml Type: SwitchParameter @@ -276,7 +280,9 @@ Accept wildcard characters: False ### -IncludeAcceptMessagesOnlyFromWithDisplayNames This parameter is available only in the cloud-based service. -{{ Fill IncludeAcceptMessagesOnlyFromWithDisplayNames Description }} +The IncludeAcceptMessagesOnlyFromWithDisplayNames switch retrieves the UPN/SMTP address and display name of all recipients who are explicitly allowed to send messages to the distribution group, as present in the `AcceptMessagesOnlyFrom` property. If this switch is not specified, the `AcceptMessagesOnlyFromWithDisplayNames` property will return an empty result. + +**Note:** This switch was introduced following a change where recipient names were replaced with GUIDs, to restore human-readable identifiers in the output. ```yaml Type: SwitchParameter @@ -294,7 +300,9 @@ Accept wildcard characters: False ### -IncludeBypassModerationFromSendersOrMembersWithDisplayNames This parameter is available only in the cloud-based service. -{{ Fill IncludeBypassModerationFromSendersOrMembersWithDisplayNames Description }} +The IncludeBypassModerationFromSendersOrMembersWithDisplayNames switch retrieves the UPN/SMTP address and display name of all senders or group members who are allowed to bypass moderation settings for the distribution group, as defined in the `BypassModerationFromSendersOrMembers` property. If this switch is not specified, the `BypassModerationFromSendersOrMembersWithDisplayNames` property will return an empty result. + +**Note:** This switch was introduced following a change where recipient names were replaced with GUIDs, to restore human-readable identifiers in the output. ```yaml Type: SwitchParameter @@ -312,7 +320,9 @@ Accept wildcard characters: False ### -IncludeGrantSendOnBehalfToWithDisplayNames This parameter is available only in the cloud-based service. -{{ Fill IncludeGrantSendOnBehalfToWithDisplayNames Description }} +The IncludeGrantSendOnBehalfToWithDisplayNames switch retrieves the UPN/SMTP address and display name of all users who are granted Send-On-Behalf permissions for the distribution group, as defined in the `GrantSendOnBehalfTo` property. If this switch is not specified, the `GrantSendOnBehalfToWithDisplayNames` property will return an empty result. + +**Note:** This switch was introduced following a change where recipient names were replaced with GUIDs, to restore human-readable identifiers in the output. ```yaml Type: SwitchParameter @@ -330,7 +340,9 @@ Accept wildcard characters: False ### -IncludeModeratedByWithDisplayNames This parameter is available only in the cloud-based service. -{{ Fill IncludeModeratedByWithDisplayNames Description }} +The IncludeModeratedByWithDisplayNames switch retrieves the UPN/SMTP address and display name of all moderators assigned to the distribution group, as defined in the `ModeratedBy` property. If this switch is not specified, the `ModeratedByWithDisplayNames` property will return an empty result. + +**Note:** This switch was introduced following a change where recipient names were replaced with GUIDs, to restore human-readable identifiers in the output. ```yaml Type: SwitchParameter From a70c46177771dac9845d8df615100ac4252c878a Mon Sep 17 00:00:00 2001 From: Chris Davis Date: Thu, 22 May 2025 08:31:41 -0700 Subject: [PATCH 2/2] Update Get-DistributionGroup.md --- .../exchange/Get-DistributionGroup.md | 24 +++++++++---------- 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/exchange/exchange-ps/exchange/Get-DistributionGroup.md b/exchange/exchange-ps/exchange/Get-DistributionGroup.md index 834cb478d0..601c6b2a36 100644 --- a/exchange/exchange-ps/exchange/Get-DistributionGroup.md +++ b/exchange/exchange-ps/exchange/Get-DistributionGroup.md @@ -240,9 +240,9 @@ Accept wildcard characters: False ### -IncludeAcceptMessagesOnlyFromDLMembersWithDisplayNames This parameter is available only in the cloud-based service. -The IncludeAcceptMessagesOnlyFromDLMembersWithDisplayNames switch retrieves the UPN/SMTP address and display name of all distribution group members who are explicitly allowed to send messages to the distribution group, as defined in the `AcceptMessagesOnlyFromDLMembers` property. If this switch is not specified, the `AcceptMessagesOnlyFromDLMembersWithDisplayNames` property will return an empty result. +The IncludeAcceptMessagesOnlyFromDLMembersWithDisplayNames switch specifies whether to return the SMTP addresses and display names of AcceptMessagesOnlyFromDLMembers recipients in the AcceptMessagesOnlyFromDLMembersWithDisplayNames property. You don't need to specify a value with this switch. -**Note:** This switch was introduced following a change where recipient names were replaced with GUIDs, to restore human-readable identifiers in the output. +This switch was introduced to restore human-readable identifiers in the results of the cmdlet. If you don't use this switch, AcceptMessagesOnlyFromDLMembers recipients are shown as GUIDs and the AcceptMessagesOnlyFromDLMembersWithDisplayNames property is empty. ```yaml Type: SwitchParameter @@ -260,9 +260,9 @@ Accept wildcard characters: False ### -IncludeAcceptMessagesOnlyFromSendersOrMembersWithDisplayNames This parameter is available only in the cloud-based service. -The IncludeAcceptMessagesOnlyFromSendersOrMembersWithDisplayNames switch retrieves the UPN/SMTP address and display name of all recipients—whether individual senders or members of distribution groups—who are explicitly allowed to send messages to the distribution group, as defined in the `AcceptMessagesOnlyFromSendersOrMembers` property. If this switch is not specified, the `AcceptMessagesOnlyFromSendersOrMembersWithDisplayNames` property will return an empty result. +The IncludeAcceptMessagesOnlyFromSendersOrMembersWithDisplayNames switch specifies whether to return the SMTP addresses and display names of AcceptMessagesOnlyFromSendersOrMembers recipients in the AcceptMessagesOnlyFromSendersOrMembersWithDisplayNames property. You don't need to specify a value with this switch. -**Note:** This switch was introduced following a change where recipient names were replaced with GUIDs, to restore human-readable identifiers in the output. +This switch was introduced to restore human-readable identifiers in the results of the cmdlet. If you don't use this switch, AcceptMessagesOnlyFromSendersOrMembers recipients are shown as GUIDs and the AcceptMessagesOnlyFromSendersOrMembersWithDisplayNames property is empty. ```yaml Type: SwitchParameter @@ -280,9 +280,9 @@ Accept wildcard characters: False ### -IncludeAcceptMessagesOnlyFromWithDisplayNames This parameter is available only in the cloud-based service. -The IncludeAcceptMessagesOnlyFromWithDisplayNames switch retrieves the UPN/SMTP address and display name of all recipients who are explicitly allowed to send messages to the distribution group, as present in the `AcceptMessagesOnlyFrom` property. If this switch is not specified, the `AcceptMessagesOnlyFromWithDisplayNames` property will return an empty result. +The IncludeAcceptMessagesOnlyFromWithDisplayNames switch specifies whether to return the SMTP addresses and display names of AcceptMessagesOnlyFrom recipients in the AcceptMessagesOnlyFromWithDisplayNames property. You don't need to specify a value with this switch. -**Note:** This switch was introduced following a change where recipient names were replaced with GUIDs, to restore human-readable identifiers in the output. +This switch was introduced to restore human-readable identifiers in the results of the cmdlet. If you don't use this switch, AcceptMessagesOnlyFrom recipients are shown as GUIDs and the AcceptMessagesOnlyFromWithDisplayNames property is empty. ```yaml Type: SwitchParameter @@ -300,9 +300,9 @@ Accept wildcard characters: False ### -IncludeBypassModerationFromSendersOrMembersWithDisplayNames This parameter is available only in the cloud-based service. -The IncludeBypassModerationFromSendersOrMembersWithDisplayNames switch retrieves the UPN/SMTP address and display name of all senders or group members who are allowed to bypass moderation settings for the distribution group, as defined in the `BypassModerationFromSendersOrMembers` property. If this switch is not specified, the `BypassModerationFromSendersOrMembersWithDisplayNames` property will return an empty result. +The IncludeBypassModerationFromSendersOrMembersWithDisplayNames switch specifies whether to return the SMTP addresses and display names of BypassModerationFromSendersOrMembers recipients in the BypassModerationFromSendersOrMembersWithDisplayNames property. You don't need to specify a value with this switch. -**Note:** This switch was introduced following a change where recipient names were replaced with GUIDs, to restore human-readable identifiers in the output. +This switch was introduced to restore human-readable identifiers in the results of the cmdlet. If you don't use this switch, BypassModerationFromSendersOrMembers recipients are shown as GUIDs and the BypassModerationFromSendersOrMembersWithDisplayNames property is empty. ```yaml Type: SwitchParameter @@ -320,9 +320,9 @@ Accept wildcard characters: False ### -IncludeGrantSendOnBehalfToWithDisplayNames This parameter is available only in the cloud-based service. -The IncludeGrantSendOnBehalfToWithDisplayNames switch retrieves the UPN/SMTP address and display name of all users who are granted Send-On-Behalf permissions for the distribution group, as defined in the `GrantSendOnBehalfTo` property. If this switch is not specified, the `GrantSendOnBehalfToWithDisplayNames` property will return an empty result. +The IncludeGrantSendOnBehalfToWithDisplayNames switch specifies whether to return the SMTP addresses and display names of GrantSendOnBehalfTo recipients in the GrantSendOnBehalfToWithDisplayNames property. You don't need to specify a value with this switch. -**Note:** This switch was introduced following a change where recipient names were replaced with GUIDs, to restore human-readable identifiers in the output. +This switch was introduced to restore human-readable identifiers in the results of the cmdlet. If you don't use this switch, GrantSendOnBehalfTo recipients are shown as GUIDs and the GrantSendOnBehalfToWithDisplayNames property is empty. ```yaml Type: SwitchParameter @@ -340,9 +340,9 @@ Accept wildcard characters: False ### -IncludeModeratedByWithDisplayNames This parameter is available only in the cloud-based service. -The IncludeModeratedByWithDisplayNames switch retrieves the UPN/SMTP address and display name of all moderators assigned to the distribution group, as defined in the `ModeratedBy` property. If this switch is not specified, the `ModeratedByWithDisplayNames` property will return an empty result. +The IncludeModeratedByWithDisplayNames switch specifies whether to return the SMTP addresses and display names of ModeratedBy recipients in the ModeratedByWithDisplayNames property. You don't need to specify a value with this switch. -**Note:** This switch was introduced following a change where recipient names were replaced with GUIDs, to restore human-readable identifiers in the output. +This switch was introduced to restore human-readable identifiers in the results of the cmdlet. If you don't use this switch, ModeratedBy recipients are shown as GUIDs and the ModeratedByWithDisplayNames property is empty. ```yaml Type: SwitchParameter