Try LOLIN_WIFI_FIX with matrix portal to see if that helps with poor wifi

Author: netmindz

platformio.ini

@@ -2294,12 +2294,9 @@ build_flags = ${common.build_flags} ${esp32s3.build_flags} -Wno-misleading-inden
   -DARDUINO_USB_MODE=1 -DARDUINO_USB_CDC_ON_BOOT=1 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=1 ;; for Hardware-CDC USB mode
   -D WLED_DISABLE_ADALIGHT     ;; disables serial protocols - recommended for Hardware-CDC USB (Serial RX will receive junk commands when RX pin is unconnected, unless its pulled down by resistor)
   ${common_mm.animartrix_build_flags}
+  ${common_mm.build_disable_sync_interfaces}
+  -D LOLIN_WIFI_FIX ;; try this in case Wifi does not work
   -D WLED_WATCHDOG_TIMEOUT=0 -D CONFIG_ASYNC_TCP_USE_WDT=0
-  -D WLED_DISABLE_LOXONE ; FLASH 1272 bytes
-  -D WLED_DISABLE_ALEXA ;  RAM 116 bytes; FLASH 13524 bytes
-  -D WLED_DISABLE_MQTT ;   RAM 216 bytes; FLASH 16496 bytes
-  -D WLED_DISABLE_HUESYNC ;RAM 122 bytes; FLASH 6308 bytes
-  -D WLED_DISABLE_INFRARED ;RAM 136 bytes; FLASH 24492 bytes
   -D WLED_USE_PSRAM -DBOARD_HAS_PSRAM ; tells WLED that PSRAM shall be used
   -D WLED_ENABLE_HUB75MATRIX -D NO_GFX ;-D SPIRAM_FRAMEBUFFER
   -D DEFAULT_LED_TYPE=101