Merge pull request #122 from weblate/weblate-muos-mux

Translations update from Hosted Weblate

Author: xonglebongle

mux/ar.json

@@ -594,7 +594,7 @@
     "30s": "30 ثانية",
     "5m": "5 دقائق",
     "60s": "60 ثانية",
-    "Configure how the power button functions on long press (2 seconds)": "ضبط كيفية عمل زر الطاقة عند الضغط عليه لفترة طويلة (ثانيتين)",
+    "Configure how the power button functions on short press": "Configure how the power button functions on short press",
     "Configure the time the device will sleep when no input is detected": "ضبط وقت سكون الجهاز بعد عدم اكتشاف أي إدخال",
     "Configure the time the screen will dim when no input is detected": "ضبط الوقت الذي ستصبح فيه الشاشة خافتة بعد عدم اكتشاف أي إدخال",
     "Configure when the red LED will display based on the current capacity percentage": "ضبط وقت عرض مؤشر LED الأحمر استنادًا إلى النسبة المئوية لسعة البطارية",

mux/bg.json

@@ -594,7 +594,7 @@
     "30s": "30с",
     "5m": "5м",
     "60s": "60с",
-    "Configure how the power button functions on long press (2 seconds)": "Конфигурирай как да действа POWER бутона при продължително натискане (2 секунди)",
+    "Configure how the power button functions on short press": "Configure how the power button functions on short press",
     "Configure the time the device will sleep when no input is detected": "Конфигурирай времето, през което устройството ще заспи, когато не е натиснат никакъв бутон",
     "Configure the time the screen will dim when no input is detected": "Конфигурирай времето, за което екранът ще се затъмни, когато не е натиснат никакъв бутон",
     "Configure when the red LED will display based on the current capacity percentage": "Конфигурирай кога червеният светодиод ще светне от текущия процент на капацитета",

mux/ca.json

@@ -594,7 +594,7 @@
     "30s": "30s",
     "5m": "5m",
     "60s": "60s",
-    "Configure how the power button functions on long press (2 seconds)": "Configura com funciona el botó POWER en mantenir-lo premut (2 segons)",
+    "Configure how the power button functions on short press": "Configure how the power button functions on short press",
     "Configure the time the device will sleep when no input is detected": "Configura el temps d'espera per a que el dispositiu es suspengui en no prémer cap tecla",
     "Configure the time the screen will dim when no input is detected": "Configura el temps d'espera per a que la pantalla s'enfosqueixi en no prémer cap tecla",
     "Configure when the red LED will display based on the current capacity percentage": "Configura l'encesa del LED vermell segons el percentatge de bateria actual",

mux/ca@valencia.json

@@ -594,7 +594,7 @@
     "30s": "30s",
     "5m": "5m",
     "60s": "60s",
-    "Configure how the power button functions on long press (2 seconds)": "Configure how the power button functions on long press (2 seconds)",
+    "Configure how the power button functions on short press": "Configure how the power button functions on short press",
     "Configure the time the device will sleep when no input is detected": "Configure the time the device will sleep when no input is detected",
     "Configure the time the screen will dim when no input is detected": "Configure the time the screen will dim when no input is detected",
     "Configure when the red LED will display based on the current capacity percentage": "Configure when the red LED will display based on the current capacity percentage",

mux/cs.json

@@ -59,7 +59,7 @@
     "No Applications Found": "Nebyly nalezeny žádné aplikace",
     "PPSSPP": "PPSSPP",
     "PortMaster": "PortMaster",
-    "RGB Controller": "RGB Controller",
+    "RGB Controller": "RGB ovladač",
     "RetroArch": "RetroArch",
     "ScummVM": "ScummVM",
     "Task Toolkit": "Sada nástrojů"
@@ -144,7 +144,7 @@
   },
   "muxconfig": {
     "CONFIGURATION": "KONFIGURACE",
-    "Connect your device via Wi-Fi, enable web services, or enable USB functions": "Connect your device via Wi-Fi, enable web services, or enable USB functions",
+    "Connect your device via Wi-Fi, enable web services, or enable USB functions": "Připojte zařízení přes Wi-Fi, povolte webové služby nebo funkce USB",
     "Connectivity": "Konektivita",
     "Customisation": "Přizpůsobení",
     "Customise your muOS setup with user created packages": "Přizpůsobte si nastavení muOS pomocí balíčků vytvořených uživatelem",
@@ -358,14 +358,14 @@
     "Allow selection of content control scheme": "Povolit výběr schématu správy obsahu",
     "Allow selection of content cores": "Povolit výběr obsahových jader",
     "Allow selection of content governor": "Povolit výběr regulátoru obsahu",
-    "Allow the use of the user based content backup tool": "Allow the use of the user based content backup tool",
+    "Allow the use of the user based content backup tool": "Povolit použití nástroje pro zálohování obsahu na základě uživatele",
     "Allow user to migrate or sync user based content": "Povolit uživateli migraci nebo synchronizaci uživatelského obsahu",
     "Allow users to adjust content options": "Umožnit uživatelům upravovat možnosti obsahu",
     "Allow users to customise the interface": "Umožněte uživatelům přizpůsobit si rozhraní",
     "Allow viewing system information": "Povolit zobrazení informací o systému",
     "Applications": "Aplikace",
     "Archive Manager": "Správce Archivu",
-    "Backup": "Backup",
+    "Backup": "Zálohování",
     "Collection Access": "Přístup ke sbírce",
     "Collection Adding Content": "Sbírka přidání obsahu",
     "Collection Folder Creation": "Vytvoření složky kolekce",
@@ -563,8 +563,8 @@
     "CATALOGUE PICKER": "VÝBĚR KATALOGU",
     "CONFIG PICKER": "VÝBĚR KONFIGURACE",
     "CUSTOM PICKER": "VLASTNÍ VÝBĚR",
-    "Failed to remove item…": "Failed to remove item…",
-    "Hold L2 and press X to confirm deletion!": "Hold L2 and press X to confirm deletion!",
+    "Failed to remove item…": "Položku se nepodařilo odstranit…",
+    "Hold L2 and press X to confirm deletion!": "Podržte L2 a stiskněte X pro potvrzení smazání!",
     "Incompatible Theme Resolution Detected": "Bylo zjištěno nekompatibilní rozlišení motivu",
     "Incompatible Theme Version Detected": "Byla zjištěna nekompatibilní verze motivu",
     "No Catalogue Packages Found": "Nebyly nalezeny žádné balíčky katalogu",
@@ -574,7 +574,7 @@
     "THEME PICKER": "VÝBĚR TÉMAT",
     "Theme Download": "Téma ke stažení",
     "There are no attributed credits!": "Nejsou žádné přidělené kredity!",
-    "This theme is protected from deletion!": "This theme is protected from deletion!"
+    "This theme is protected from deletion!": "Toto téma je chráněno před smazáním!"
   },
   "muxplore": {
     "Content is not associated with system or core": "Obsah není spojen se systémem nebo jádrem",
@@ -594,7 +594,7 @@
     "30s": "30s",
     "5m": "5m",
     "60s": "60s",
-    "Configure how the power button functions on long press (2 seconds)": "Nakonfigurujte, jak funguje tlačítko napájení při dlouhém stisknutí (2 sekundy)",
+    "Configure how the power button functions on short press": "Configure how the power button functions on short press",
     "Configure the time the device will sleep when no input is detected": "Nakonfigurujte dobu, po kterou zařízení přejde do režimu spánku, když není detekován žádný vstup",
     "Configure the time the screen will dim when no input is detected": "Nakonfigurujte dobu, po kterou obrazovka ztmavne, když není detekován žádný vstup",
     "Configure when the red LED will display based on the current capacity percentage": "Nakonfigurujte, kdy se bude zobrazovat červená LED na základě aktuálního procenta kapacity",

mux/de.json

@@ -594,7 +594,7 @@
     "30s": "30Sek",
     "5m": "5Min",
     "60s": "60Sek",
-    "Configure how the power button functions on long press (2 seconds)": "Einstellen was beim drücken des Ausschalter Knopf geschehen soll.(2 Sekunden gedrückt halten)",
+    "Configure how the power button functions on short press": "Configure how the power button functions on short press",
     "Configure the time the device will sleep when no input is detected": "Die Zeit einstellen, ab wann das System in den Standbymodus wechselt, wenn nach einiger Zeit keine Eingaben mehr gemacht wurden",
     "Configure the time the screen will dim when no input is detected": "Die Zeit einstellen, ab wann der Bildschirm verdunkelt wird, wenn keine Eingabe erkannt wird",
     "Configure when the red LED will display based on the current capacity percentage": "Einstellen wann die rote LED angeht um anzuzeigen, dass der Akku zu neige geht",

mux/en@pirate.json

@@ -594,7 +594,7 @@
     "30s": "30s",
     "5m": "5m",
     "60s": "60s",
-    "Configure how the power button functions on long press (2 seconds)": "Configure how the power button functions on long press (2 seconds)",
+    "Configure how the power button functions on short press": "Configure how the power button functions on short press",
     "Configure the time the device will sleep when no input is detected": "Configure the time the device will sleep when no input is detected",
     "Configure the time the screen will dim when no input is detected": "Configure the time the screen will dim when no input is detected",
     "Configure when the red LED will display based on the current capacity percentage": "Configure when the red LED will display based on the current capacity percentage",

mux/en_US.json

@@ -594,7 +594,7 @@
     "30s": "30s",
     "5m": "5m",
     "60s": "60s",
-    "Configure how the power button functions on long press (2 seconds)": "Configure how the power button functions on long press (2 seconds)",
+    "Configure how the power button functions on short press": "Configure how the power button functions on short press",
     "Configure the time the device will sleep when no input is detected": "Configure the time the device will sleep when no input is detected",
     "Configure the time the screen will dim when no input is detected": "Configure the time the screen will dim when no input is detected",
     "Configure when the red LED will display based on the current capacity percentage": "Configure when the red LED will display based on the current capacity percentage",

mux/es.json

@@ -144,7 +144,7 @@
   },
   "muxconfig": {
     "CONFIGURATION": "CONFIGURACIÓN",
-    "Connect your device via Wi-Fi, enable web services, or enable USB functions": "Connect your device via Wi-Fi, enable web services, or enable USB functions",
+    "Connect your device via Wi-Fi, enable web services, or enable USB functions": "Conecta tu dispositivo a través de Wi-Fi, activa los servicios web o activa las funciones USB",
     "Connectivity": "Conectividad",
     "Customisation": "Personalización",
     "Customise your muOS setup with user created packages": "Personaliza tu configuración de muOS con paquetes creados por el usuario",
@@ -563,8 +563,8 @@
     "CATALOGUE PICKER": "SELECTOR DE CATÁLOGO",
     "CONFIG PICKER": "SELECTOR DE CONFIGURACIÓN",
     "CUSTOM PICKER": "SELECCIONADOR PERSONALIZADO",
-    "Failed to remove item…": "Failed to remove item…",
-    "Hold L2 and press X to confirm deletion!": "Hold L2 and press X to confirm deletion!",
+    "Failed to remove item…": "No se ha podido eliminar el elemento…",
+    "Hold L2 and press X to confirm deletion!": "¡Mantén pulsado L2 y pulsa X para confirmar la eliminación!",
     "Incompatible Theme Resolution Detected": "Resolución de tema incompatible detectada",
     "Incompatible Theme Version Detected": "Versión de tema incompatible detectada",
     "No Catalogue Packages Found": "No se han encontrado paquetes de catálogo",
@@ -574,7 +574,7 @@
     "THEME PICKER": "SELECCIONADOR DE TEMA",
     "Theme Download": "Descarga del tema",
     "There are no attributed credits!": "¡No hay créditos atribuidos!",
-    "This theme is protected from deletion!": "This theme is protected from deletion!"
+    "This theme is protected from deletion!": "¡Este tema está protegido contra el borrado!"
   },
   "muxplore": {
     "Content is not associated with system or core": "El contenido no está asociado a un sistema o núcleo",
@@ -594,7 +594,7 @@
     "30s": "30s",
     "5m": "5m",
     "60s": "60s",
-    "Configure how the power button functions on long press (2 seconds)": "Configura cómo funciona el botón de encendido al presionarlo prolongadamente (2 segundos)",
+    "Configure how the power button functions on short press": "Configure how the power button functions on short press",
     "Configure the time the device will sleep when no input is detected": "Ajusta el tiempo de espera antes de que el dispositivo entre en reposo",
     "Configure the time the screen will dim when no input is detected": "Ajusta el tiempo de espera antes de que la pantalla se atenúe",
     "Configure when the red LED will display based on the current capacity percentage": "Configura cuándo se mostrará el LED rojo según el porcentaje de capacidad actual",

mux/fa.json

@@ -594,7 +594,7 @@
     "30s": "30s",
     "5m": "5m",
     "60s": "60s",
-    "Configure how the power button functions on long press (2 seconds)": "Configure how the power button functions on long press (2 seconds)",
+    "Configure how the power button functions on short press": "Configure how the power button functions on short press",
     "Configure the time the device will sleep when no input is detected": "Configure the time the device will sleep when no input is detected",
     "Configure the time the screen will dim when no input is detected": "Configure the time the screen will dim when no input is detected",
     "Configure when the red LED will display based on the current capacity percentage": "Configure when the red LED will display based on the current capacity percentage",