Enable bottom mask.

Author: thejpster

neotron-32.kicad_pcb

@@ -20,19 +20,20 @@
   )
 
   (layers
-    (0 F.Cu signal)
+    (0 F.Cu signal hide)
     (1 Gnd.Cu signal hide)
     (2 Vcc.Cu signal hide)
     (31 B.Cu signal hide)
     (33 F.Adhes user hide)
     (35 F.Paste user hide)
     (37 F.SilkS user hide)
-    (39 F.Mask user hide)
+    (38 B.Mask user)
+    (39 F.Mask user)
     (40 Dwgs.User user hide)
     (41 Cmts.User user hide)
     (42 Eco1.User user hide)
     (43 Eco2.User user hide)
-    (44 Edge.Cuts user)
+    (44 Edge.Cuts user hide)
     (45 Margin user hide)
     (46 B.CrtYd user hide)
     (47 F.CrtYd user hide)
@@ -72,7 +73,7 @@
     (grid_origin 96.52 20.32)
     (visible_elements 7FFFFFFF)
     (pcbplotparams
-      (layerselection 0x01020_ffffffff)
+      (layerselection 0x010e0_ffffffff)
       (usegerberextensions true)
       (usegerberattributes false)
       (usegerberadvancedattributes false)
@@ -6758,7 +6759,7 @@
   (segment (start 80.01 48.3) (end 80.01 46.99) (width 1.016) (layer F.Cu) (net 116))
   (segment (start 78.105 37.465) (end 78.74 36.83) (width 1.016) (layer F.Cu) (net 116))
 
-  (zone (net 1) (net_name GND) (layer Gnd.Cu) (tstamp 0) (hatch edge 0.508)
+  (zone (net 1) (net_name GND) (layer Gnd.Cu) (tstamp 5E254E4E) (hatch edge 0.508)
     (connect_pads (clearance 0.5))
     (min_thickness 0.254)
     (fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
@@ -9537,7 +9538,7 @@
       )
     )
   )
-  (zone (net 12) (net_name +3V3) (layer Vcc.Cu) (tstamp 0) (hatch edge 0.508)
+  (zone (net 12) (net_name +3V3) (layer Vcc.Cu) (tstamp 5E254E4B) (hatch edge 0.508)
     (connect_pads (clearance 0.5))
     (min_thickness 0.254)
     (fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))

neotron-32.pro

@@ -212,7 +212,7 @@ Enabled=0
 [pcbnew/Layer.F.SilkS]
 Enabled=1
 [pcbnew/Layer.B.Mask]
-Enabled=0
+Enabled=1
 [pcbnew/Layer.F.Mask]
 Enabled=1
 [pcbnew/Layer.Dwgs.User]

release.sh

@@ -9,7 +9,7 @@ if [ ! -v DOCKER_CMD ]; then
 	DOCKER_CMD="docker run --rm -it -v ${DIR}:/kicad-project productize/kicad-automation-scripts"
 fi
 
-LAYERS="F.Cu Gnd.Cu Vcc.Cu B.Cu F.Mask F.CrtYd F.Fab F.SilkS Edge.Cuts"
+LAYERS="F.Cu Gnd.Cu Vcc.Cu B.Cu F.Mask F.CrtYd F.Fab F.SilkS B.Mask Edge.Cuts"
 
 TEMP_PATH=$(mktemp -d "${DIR}/kicad-automation-XXXXXX")