New release v2024.6.2 : Which file I need for my SLZB-06M with ember driver?

[MilesTEG1]

Hello,
I installed severals weeks ago this file: smlight_slzb06m_ncp-uart-sw_115200_8.0.1.0.gbl from a branch you had since. (I don't find this file anymore here)

Your new release v2024.6.2 has twi files for my SLZB-06M :

• smlight_slzb06m_ncp-uart-sw_115200_8.0.2.0.gbl
• smlight_slzb06m_rcp-uart-802154-blehci-sw_460800_2024.6.2.gbl

Which one I have to flash? Is it compatible with ember driver on Z2M?

Thanks in advance.

[quensen]

@MilesTEG1
NCP is Zigbee
RCP is Thread

[MilesTEG1]

@MilesTEG1

NCP is Zigbee

RCP is Thread

Ok! Thank you 😊

The question of the Ember driver remains. Is this firmware compatible with ember?

[quensen]

The question of the Ember driver remains. Is this firmware compatible with ember?

I have a different coordinator dongle, but ialso Zigbee2MQTT and installed the relevant 8.0.2 version successfully yesterday and it’s working fine with Z2M so far.

[MilesTEG1]

The question of the Ember driver remains. Is this firmware compatible with ember?

I have a different coordinator dongle, but ialso Zigbee2MQTT and installed the relevant 8.0.2 version successfully yesterday and it’s working fine with Z2M so far.

Hello,
So, you use Ember as Zigbee driver, right?

[quensen]

Yes, I have adapter: ember in my configuration.yaml

Z2M reports: Coordinator-Typ EmberZNet on the About page.

[MilesTEG1]

Yes, I have adapter: ember in my configuration.yaml

Z2M reports: Coordinator-Typ EmberZNet on the About page.

Yeah, that's what I wanted to knwo. Thank you very much.

[MilesTEG1]

Flash done with smlight_slzb06m_ncp-uart-sw_115200_8.0.2.0.gbl.
No errors, and continue to works fine.
Thanks @Nerivec

[MilesTEG1]

@quensen You seem to be offended, but I already thank you for your answers.
In my last message, I was thanking @Nerivec for his version of the firmware for my SLZB-06M.
@quensen you were very helpful in answering my questions, thanks for that.

[Nerivec]

Some more details: 802514-blehci version is indeed RCP with support for ZigBee + OpenThread + BLE. This is highly experimental and requires a more advanced setup (there's an official Silabs Docker container, and a few repo, repo that experiment with it).

As for the version, usually, considering a version x.y.z, as long as Z2M supports x.y, when z changes, it should automatically be compatible, as these are only fixes/improvements, not breaking changes.