How do I actually pair my router-flashed USB Stick to zigbee2mqtt?

[FrozenGalaxy]

I successfully flashed my easyiot v1.2 stick with:
"easyiot_zb-gw04-1v2_zigbee_router_8.0.2.0_115200_sw_flow.gbl"
and updated its BL to "easyiot_zb-gw04_bootloader_2.5.2.gbl"

I checked via serial:

Gecko Bootloader v2.05.02
1. upload gbl
2. run
3. ebl info
BL > Reset info: 0x03 (EXT)

SL_STATUS_NETWORK_UP 0xAA6C

NWK Steering stack status 0x15

Extended Reset info: 0x301 (PIN)
RX: ZDO, command 0x0013, status: 0x00

Device Announce: 0xAA6C

T00000000:RX len 6, ep F2, clus 0x0021 (Green Power) FC 19 seq 12 cmd 02 payload[0B FE 00 ]

Enter comm for sink 0000

Seems to work, I then Hit permit join in zigbee2mqtt but nothing shows up, I am using zigbee2mqtt dev (e.g 2.0+)

EDIT: I tried multiple combinations, I held either key during plugging in the USB stick, I single clicked each key, idk what else I could do..

EDIT2: found some more debugging that might help:

Jan 04 13:18:32 sakura npm[2237625]: [2025-01-04 13:18:32] debug:         zh:controller: Device announce from '0x38398ffffeae195f:43628'
Jan 04 13:18:32 sakura npm[2237625]: [2025-01-04 13:18:32] debug:         zh:controller: Device announce is from unknown device '0x38398ffffeae195f:43628'
Jan 04 13:18:32 sakura npm[2237625]: [2025-01-04 13:18:32] debug:         zh:ember:uart:ash: <--- [FRAME type=DATA]
Jan 04 13:18:32 sakura npm[2237625]: [2025-01-04 13:18:32] debug:         zh:ember:uart:ash: <--- [FRAME type=DATA ackNum=3](ackRx=3 frmTx=3)
Jan 04 13:18:32 sakura npm[2237625]: [2025-01-04 13:18:32] debug:         zh:ember:uart:ash: <--- [FRAME type=DATA ackNum=3 frmNum=0](frmRx=0) Added to rxQueue
Jan 04 13:18:32 sakura npm[2237625]: [2025-01-04 13:18:32] debug:         zh:ember:uart:ash: ---> [FRAME type=ACK frmRx=1](ackRx=3)
Jan 04 13:18:32 sakura npm[2237625]: [2025-01-04 13:18:32] debug:         zh:ember:ezsp: <=== [CBFRAME: ID=63:"MESSAGE_SENT_HANDLER" Seq=50 Len=26]
Jan 04 13:18:32 sakura npm[2237625]: [2025-01-04 13:18:32] debug:         zh:ember:ezsp: ezspMessageSentHandler(): callback called with: [status=OK], [type=BROADCAST], [indexOrDestination=65533], [apsFrame={"profileId":0,"clusterId":19,"sourceEndpoint":0,"destinationEndpoint":0,"options":1024,"groupId":0,"sequence":53}], [messageTag=1]
Jan 04 13:18:32 sakura npm[2237625]: [2025-01-04 13:18:32] debug:         zh:ember:uart:ash: <--- [FRAME type=DATA]
Jan 04 13:18:32 sakura npm[2237625]: [2025-01-04 13:18:32] debug:         zh:ember:uart:ash: <--- [FRAME type=DATA ackNum=3](ackRx=3 frmTx=3)
Jan 04 13:18:32 sakura npm[2237625]: [2025-01-04 13:18:32] debug:         zh:ember:uart:ash: <--- [FRAME type=DATA ackNum=3 frmNum=1](frmRx=1) Added to rxQueue
Jan 04 13:18:32 sakura npm[2237625]: [2025-01-04 13:18:32] debug:         zh:ember:uart:ash: ---> [FRAME type=ACK frmRx=2](ackRx=3)
Jan 04 13:18:32 sakura npm[2237625]: [2025-01-04 13:18:32] debug:         zh:ember:ezsp: <=== [CBFRAME: ID=63:"MESSAGE_SENT_HANDLER" Seq=50 Len=26]
Jan 04 13:18:32 sakura npm[2237625]: [2025-01-04 13:18:32] debug:         zh:ember:ezsp: ezspMessageSentHandler(): callback called with: [status=OK], [type=BROADCAST], [indexOrDestination=65533], [apsFrame={"profileId":0,"clusterId":19,"sourceEndpoint":0,"destinationEndpoint":0,"options":1024,"groupId":0,"sequence":94}], [messageTag=9]
Jan 04 13:18:34 sakura npm[2237625]: [2025-01-04 13:18:34] debug:         zh:ember:uart:ash: <--- [FRAME type=DATA]
Jan 04 13:18:34 sakura npm[2237625]: [2025-01-04 13:18:34] debug:         zh:ember:uart:ash: <--- [FRAME type=DATA ackNum=3](ackRx=3 frmTx=3)
Jan 04 13:18:34 sakura npm[2237625]: [2025-01-04 13:18:34] debug:         zh:ember:uart:ash: <--- [FRAME type=DATA ackNum=3 frmNum=2](frmRx=2) Added to rxQueue
Jan 04 13:18:34 sakura npm[2237625]: [2025-01-04 13:18:34] debug:         zh:ember:uart:ash: ---> [FRAME type=ACK frmRx=3](ackRx=3)
Jan 04 13:18:34 sakura npm[2237625]: [2025-01-04 13:18:34] debug:         zh:ember:ezsp: <=== [CBFRAME: ID=69:"INCOMING_MESSAGE_HANDLER" Seq=50 Len=49]
Jan 04 13:18:34 sakura npm[2237625]: [2025-01-04 13:18:34] debug:         zh:ember:ezsp: ezspIncomingMessageHandler(): callback called with: [type=BROADCAST], [apsFrame={"profileId":0,"clusterId":19,"sourceEndpoint":0,"destinationEndpoint":0,"options":1024,"groupId":0,"sequence":148}], [packetInfo:{"senderShortId":43628,"senderLongId":"0x38398ffffeae195f","bindingIndex":255,"addressIndex":255,"lastHopLqi":252,"lastHopRssi":-48,"lastHopTimestamp":525275662}], [messageContents=816caa5f19aefeff8f39388e]
Jan 04 13:18:34 sakura npm[2237625]: [2025-01-04 13:18:34] debug:         zh:controller: Received ZDO response: clusterId=END_DEVICE_ANNOUNCE, status=SUCCESS, payload={"nwkAddress":43628,"eui64":"0x38398ffffeae195f","capabilities":{"alternatePANCoordinator":0,"deviceType":1,"powerSource":1,"rxOnWhenIdle":1,"reserved1":0,"reserved2":0,"securityCapability":0,"allocateAddress":1}}

[Nerivec]

Try to clear the NVM3, you may have some previous network remnants that's preventing it from working properly. Then pair it like a normal device (permit join). It tries to pair every 10sec as long as it's not joined.
https://github.com/Nerivec/ember-zli/wiki/Bootloader#clear-nvm3

[FrozenGalaxy]

How do I clear nvm?Am 04.01.2025 14:17 schrieb Nerivec ***@***.***>: Try to clear the NVM3, you may have some previous network remnants that's preventing it from working properly. Then pair it like a normal device (permit join). It tries to pair every 10sec as long as it's not joined. https://github.com/Nerivec/ember-zli/wiki/Bootloader#clear-nvm3 —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: ***@***.***>

[Nerivec]

See the link I mentioned.
If you don't want to use Ember ZLI, you can get the GBL file directly and flash it like a regular firmware.

[FrozenGalaxy]

Sorry, overlooked the link while on Phone, clearing the nvm worked! Thanks!