Merge pull request #26 from Open-Source-Space-Foundation/board_radio_definition-ngay

Move closer to D as default

Author: ineskhou

pull_request_template.md renamed to .github/pull_request_template.md

@@ -2,15 +2,15 @@
 
 ## Description
 
-A clear and concise description of the changes being introduced in this pull request. Explain the "why" behind the changes, not just the "what."
+<!-- Provide a clear and concise description of the changes being introduced in this pull request. Explain the "why" behind the changes, not just the "what." -->
 
 ## Related Issues/Tickets
 
-Link any relevant issues, tasks, or user stories (e.g., Closes #123, Fixes #456).
+<!-- Link any relevant issues, tasks, or user stories (e.g., Closes #123, Fixes #456). -->
 
 ## How Has This Been Tested?
 
-Describe the tests that you ran to verify your changes. Provide instructions so we can reproduce. Please also list any relevant details for your test configuration.
+<!-- Describe the tests that you ran to verify your changes. Provide instructions so we can reproduce. Please also list any relevant details for your test configuration. -->
 
 - [ ] Unit tests
 - [ ] Integration tests
@@ -19,7 +19,7 @@ Describe the tests that you ran to verify your changes. Provide instructions so
 
 ## Screenshots / Recordings (if applicable)
 
-Provide screenshots or screen recordings that demonstrate the changes, especially for UI-related updates.
+<!-- Provide screenshots or screen recordings that demonstrate the changes, especially for UI-related updates. -->
 
 ## Checklist
 

boards/bronco_space/proves_flight_control_board_v5/proves_flight_control_board_v5.dtsi

@@ -21,8 +21,8 @@
 	leds {
 		compatible = "gpio-leds";
 		led0: led0 {
-			gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
-			label = "User LED GPIO24";
+			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+			label = "Watchdog LED";
 		};
 	};
 };

boards/bronco_space/proves_flight_control_board_v5c/proves_flight_control_board_v5c_rp2350a_m33.dts

@@ -18,20 +18,14 @@
 
 #include "../proves_flight_control_board_v5/proves_flight_control_board_v5.dtsi"
 
+// Configure the Watchdog LED
+&led0 {
+	gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+};
 
+// Configure the LoRa DIO pins
 &spi1 {
-	status = "okay";
-	cs-gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
-	pinctrl-0 = <&spi1_default>;
-	pinctrl-names = "default";
-
-	lora0: sx1276@0 {
-		compatible = "semtech,sx1276";
-		reg = <0>;
-		spi-max-frequency = <125000>;
+	sx1276@0 {
 		dio-gpios =  <&gpio0 13 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>,<&gpio0 12 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>;
-		reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-		power-amplifier-output = "pa-boost";
-		label = "HOPE_RF";
 	};
 };

boards/bronco_space/proves_flight_control_board_v5d/proves_flight_control_board_v5d_rp2350a_m33.dts

@@ -17,8 +17,3 @@
 #include <raspberrypi/rpi_pico/m33.dtsi>
 
 #include "../proves_flight_control_board_v5/proves_flight_control_board_v5.dtsi"
-
-&led0 {
-	gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
-	label = "User LED GPIO23";
-};