Build plate dimensions

[DiarmuidKelly]

For the printed parts, is there a minimum build plate volume?

Would standard bed sizes anywhere between 200x200x200 and 300x300x300 work? Adding this to the documentation would be helpful. If I figure it out I'll add back here.

[DiarmuidKelly]

Largest singles pieces standard rotation:

Category	Piece	X	Y	Z
ALTAZ	51111_adapter_right.STL	158.7	90.0	42.0
base	RA_ring_right.STL	137.3	214.5	9.0
base	6012_base_right_bottom.STL	59.6	118.1	50.8
base	bottom_v2.STL	119.2	163.0	17.8
DEC	DEC_holder_front_right.STL	50.1	96.4	34.6
DEC	DEC_wheel_base	80.0	88.2	9.4
other	Tripod_adapter_EQ5_alu_left.STL	85.0	27.0	45.0
other	CW_attachment_2inch.STL	50.6	50.6	28.0
RA_gearbox	gearbox.STL	111.7	81.9	38.0

Without modification the minimum build plate required: 215 x 164 x 51 mm

Rotating the RA_right_right.STL by 30° keeps it within 188.6 x 189.8 x 9.0.

If anyone comes across this, a 200x200mm plate should fit all parts with room around the edges.