Cannot find 6022BL device

[lzqlzzq]

I' ve installed the openhantek6022 from AUR Package here and had my Hantek6022BL plugged in, but OpenHantek cannot find the device, it just searching forever.
Here is my cat /proc/version:

Linux version 6.1.23-1-MANJARO (builduser@fv-az246-29) (gcc (GCC) 12.2.1 20230201, GNU ld (GNU Binutils) 2.40) #1 SMP PREEMPT_DYNAMIC Thu Apr  6 19:47:04 UTC 2023

Here is my lsusb -vvv of that device:

Bus 003 Device 007: ID 0925:3881 Lakeview Research Saleae Logic
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass       255 Vendor Specific Subclass
  bDeviceProtocol       255 Vendor Specific Protocol
  bMaxPacketSize0        64
  idVendor           0x0925 Lakeview Research
  idProduct          0x3881 Saleae Logic
  bcdDevice            0.01
  iManufacturer           1 sigrok
  iProduct                2 fx2lafw
  iSerial                 3 Saleae Logic
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0019
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass       255 Vendor Specific Subclass
  bDeviceProtocol       255 Vendor Specific Protocol
  bMaxPacketSize0        64
  bNumConfigurations      1
can't get debug descriptor: Resource temporarily unavailable
Device Status:     0x0000
  (Bus Powered)

I even tried sigrok/pulseview, but pulseview treats it as a 8-channel logic analyzer without oscilloscope. Here is sigrok-cli --scan:

The following devices were found:
demo - Demo device with 13 channels: D0 D1 D2 D3 D4 D5 D6 D7 A0 A1 A2 A3 A4
fx2lafw:conn=3.9 - Saleae Logic [S/N: Saleae Logic] with 8 channels: D0 D1 D2 D3 D4 D5 D6 D7

Had anyone encountered this? How can I handle this? Thanks a lot!

[lzqlzzq]

Sorry, didn' t see the note:
Note: To use the 6022BL in scope mode, make sure the "H/P" button is pressed before plugging in.