Update flashingrubyemmc.md

Author: MattsCheapRC

src/content/docs/hardware/RuncamVRX/flashingrubyemmc.md

@@ -16,41 +16,41 @@ This is a guide on how to flash the Runcam VRX's internal EMMC memory with Ruby
 
 3. Install the driver first.
 
-   [RuncamVRX2](https://raw.githubusercontent.com/OpenIPC/docs/refs/heads/main/src/assets/images/RuncamVRX2.jpg)
+   ![RuncamVRX2](https://raw.githubusercontent.com/MattsCheapRC/docs/refs/heads/main/src/assets/images/RuncamVRX2.jpg)
 
 4. Open config file in RKDevtool_Release_v2.93 folder
 
 5. Change Selected=1 to Selected=2. The app is now English.
 
-   [RuncamVRX3](https://raw.githubusercontent.com/OpenIPC/docs/refs/heads/main/src/assets/images/RuncamVRX3.jpg)
+   ![RuncamVRX3](https://raw.githubusercontent.com/MattsCheapRC/docs/refs/heads/main/src/assets/images/RuncamVRX3.jpg)
 
 6. There might be some random things here. Right click in the window and click “Clear items”.
 
-   [RuncamVRX4](https://raw.githubusercontent.com/OpenIPC/docs/refs/heads/main/src/assets/images/RuncamVRX4.jpg)
+   ![RuncamVRX4](https://raw.githubusercontent.com/MattsCheapRC/docs/refs/heads/main/src/assets/images/RuncamVRX4.jpg)
 
 7. Make sure the name is “loader”. Then click here:
 
-   [RuncamVRX5](https://raw.githubusercontent.com/OpenIPC/docs/refs/heads/main/src/assets/images/RuncamVRX5.jpg)
+   ![RuncamVRX5](https://raw.githubusercontent.com/MattsCheapRC/docs/refs/heads/main/src/assets/images/RuncamVRX5.jpg)
 
 8. You need this file. Download here: https://dl.radxa.com/rock3/images/loader/rock-3a/
 
-    [RuncamVRX6](https://raw.githubusercontent.com/OpenIPC/docs/refs/heads/main/src/assets/images/RuncamVRX6.jpg)
+    ![RuncamVRX6](https://raw.githubusercontent.com/MattsCheapRC/docs/refs/heads/main/src/assets/images/RuncamVRX6.jpg)
 
 9. Right click add item.
 
-     [RuncamVRX7](https://raw.githubusercontent.com/OpenIPC/docs/refs/heads/main/src/assets/images/RuncamVRX7.jpg)
+     ![RuncamVRX7](https://raw.githubusercontent.com/MattsCheapRC/docs/refs/heads/main/src/assets/images/RuncamVRX7.jpg)
 
 10. Find your Ruby image. Double click storage and select EMMC. Make sure both items are ticked and write by address is ticked.
 
-    [RuncamVRX8](https://raw.githubusercontent.com/OpenIPC/docs/refs/heads/main/src/assets/images/RuncamVRX8.jpg)
+    ![RuncamVRX8](https://raw.githubusercontent.com/MattsCheapRC/docs/refs/heads/main/src/assets/images/RuncamVRX8.jpg)
 
 11. Put your VRX in bootloader mode. On the bottom there is a small button you can press with a pin next to the HDMI port. Hold it in, power up the VRX, wait 2 seconds and release. The VRX should be in bootloader mode and you can connect it to PC via the Type C port. It should say this:
 
-    [RuncamVRX9](https://raw.githubusercontent.com/OpenIPC/docs/refs/heads/main/src/assets/images/RuncamVRX9.jpg)
+    ![RuncamVRX9](https://raw.githubusercontent.com/MattsCheapRC/docs/refs/heads/main/src/assets/images/RuncamVRX9.jpg)
 
 12. Press run and wait.
 
-    [RuncamVRX10](https://raw.githubusercontent.com/OpenIPC/docs/refs/heads/main/src/assets/images/RuncamVRX10.jpg)
+    ![RuncamVRX10](https://raw.githubusercontent.com/MattsCheapRC/docs/refs/heads/main/src/assets/images/RuncamVRX10.jpg)
 
 14. After a while it should say “Download complete”. Then you can power everything down and then restart the VRX. Ruby will go through initialization which will take time. Then it’s done