Update installing-alink-runcam.mdx

Add an example of each OSD level so readers can easily decide without testing.

Author: ayoung10

src/content/docs/hardware/Runcam/VTX/installing-alink-runcam.mdx

@@ -40,7 +40,30 @@ Detailed and technical information can be found here: https://github.com/OpenIPC
 
 7. Here you can change your OSD settings for alink (this will display information at the top for testing purposes such as signal strength, bitrate, VTX temp and CPU load). You can also change the text size.
 
-![runcamalink5](https://raw.githubusercontent.com/OpenIPC/docs/refs/heads/main/src/assets/images/runcamalink5.jpg)
+![runcamalink5](https://raw.githubusercontent.com/OpenIPC/docs/refs/heads/main/src/assets/images/runcamalink5.jpg)  
+
+
+An example of each OSD level is below.  All occupy the top left corner of the screen:  
+Level 0: No alink OSD  
+
+Level 1:   
+<img src="https://github.com/OpenIPC/docs/blob/main/src/assets/images/alink-osd-level-1.png" width=30% height=30%>  
+
+Level 2:  
+<img src="https://github.com/OpenIPC/docs/blob/main/src/assets/images/alink-osd-level-2.png" width=60% height=60%>  
+
+Level 3:  
+<img src="https://github.com/OpenIPC/docs/blob/main/src/assets/images/alink-osd-level-3.png" width=60% height=60%>  
+
+Level 4:   
+<img src="https://github.com/OpenIPC/docs/blob/main/src/assets/images/alink-osd-level-4.png" width=90%>  
+
+Level 5:  
+<img src="https://github.com/OpenIPC/docs/blob/main/src/assets/images/alink-osd-level-5.png" width=30% height=30%>
+
+&nbsp;<br>
+&nbsp;<br>
+&nbsp;<br>
 
 8. Next you need to go into txprofiles.conf here is where you will enter the tx profile you actually want to use. What settings will be set based on signal strength.