ipctool not working on Victure PC420

[rira0815]

Hello,

I have a Victure PC420 camera and I already got telnet and ftp working on it.
On the camera I tried to collect Information with the ipctool, but it seems not to work.

When I type in ./ipctool the output is nothing

When I type in ./ipctool -h the output is the "Usage" text.

output from dmesg on the camera:

Booting Linux on physical CPU 0
Linux version 3.4.35 (zhout@apemans_server) (gcc version 4.8.5 (anyka (gcc-4.8.5 + binutils-2.24 + ulcibc-0.9.33.2)(20170223)) ) #9 Thu Feb 25 11:45:35 UTC 2021
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: CLOUD39EV3_AK3918EV300_MNBD
Memory policy: ECC disabled, Data cache writeback
ANYKA CPU AK3918 (ID 0x20160100)
On node 0 totalpages: 9472
free_area_init_node: node 0, pgdat c03e9084, node_mem_map c0411000
  Normal zone: 74 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 9398 pages, LIFO batch:1
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 9398
Kernel command line: console=ttySAK0,115200n8 root=/dev/mtdblock4 rootfstype=squashfs init=/sbin/init mem=64M memsize=64M
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 37MB = 37MB total
Memory: 33276k/33276k available, 4612k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xc2800000 - 0xff000000   ( 968 MB)
    lowmem  : 0xc0000000 - 0xc2500000   (  37 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .text : 0xc0008000 - 0xc03a8000   (3712 kB)
      .init : 0xc03a8000 - 0xc03c3000   ( 108 kB)
      .data : 0xc03c4000 - 0xc03e9f58   ( 152 kB)
       .bss : 0xc03e9f7c - 0xc040aee8   ( 132 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:117
sched_clock: 32 bits at 12MHz, resolution 83ns, wraps every 357913ms
AK39 console driver initial
console [ttySAK0] enabled
Calibrating delay loop... 199.06 BogoMIPS (lpj=995328)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x81ddbdf0 - 0x81ddbe48
devtmpfs: initialized
NET: Registered protocol family 16
On-chip L2 memory initialized
AK39 clocks: CPU 400MHz, MEM 400MHz, ASIC 120MHz
Anyka platform share gpio locks initialize.
bio: create slab <bio-0> at 0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c-ak39 i2c-ak39: Unable to achieve desired frequency 300KHz. Lowest achievable 312KHz
i2c-ak39 i2c-ak39: i2c-0: AK39 I2C adapter
Linux video capture interface: v2.00
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource ak_timer5 cs
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
squashfs: version 4.0 (2009/01/31) Phillip Lougher
exFAT: Version 1.2.9
jffs2: version 2.2. © 2001-2006 Red Hat, Inc.
msgmni has been set to 64
io scheduler noop registered
io scheduler cfq registered (default)
AK39xx uart driver init, (c) 2013 ANYKA
ak39-uart.0: ttySAK0 at MMIO 0x20130000 (irq = 10) is a AK39
ion: failed to create debug files.
brd: module loaded
loop: module loaded
@@@ [akpcm_init]: enter @@@
@@@ [akpcm_probe]: enter @@@
akpcmL0->ak39_codec_probe enter...
@@@ [akpcm_probe:357]: akpcm initialize OK! @@@
@@@ [set_channel_source:105]: addr=2, src=2 @@@
@@@ [set_channel_source:153]: src=2, s_dac=0, s_linein=0, s_mic=1 @@@
akpcm probe: mic on
akpcm_probe: OK

akisp_init
Start to init Anyka SPI Flash...
Start to init Anyka partition table...
AK SPI Driver, (c) 2012 ANYKA
akpi regs: SPICON:00000152, SPISTA:00000015, SPIINT:00000000.
ak-spi ak-spi: master is unqueued, this is deprecated
ak_spi setup the master.
pre-scaler=2 (wanted 20Mhz, got 20Mhz)
ak spiflash probe enter.
pre-scaler=2 (wanted 20Mhz, got 20Mhz)
ak_spi_setupxfer,con:00000252.
akspi flash ID: 0x00c84017
akspi flash VERSION: 0x53
ak-spiflash spi0.0: gd25q64 (8192 Kbytes)
FHA:partition lib version: V1.1.06
FHA:spiflash init
FHA:boot block num offset:427
FHA:Sflash_Get_Partition_Startpage g_boot_len:880
mtd_part[0]:
name = KERNEL
size = 0x200000
offset = 0x39000
mask_flags = 0x1

mtd_part[1]:
name = MAC
size = 0x1000
offset = 0x239000
mask_flags = 0x1

mtd_part[2]:
name = ENV
size = 0x1000
offset = 0x23a000
mask_flags = 0x1

mtd_part[3]:
name = A
size = 0x180000
offset = 0x23b000
mask_flags = 0x1

mtd_part[4]:
name = B
size = 0x7d000
offset = 0x3bb000
mask_flags = 0x1

mtd_part[5]:
name = C
size = 0x3b6000
offset = 0x438000
mask_flags = 0x1

Creating 6 MTD partitions on "spi0.0":
0x000000039000-0x000000239000 : "KERNEL"
0x000000239000-0x00000023a000 : "MAC"
0x00000023a000-0x00000023b000 : "ENV"
0x00000023b000-0x0000003bb000 : "A"
0x0000003bb000-0x000000438000 : "B"
0x000000438000-0x0000007ee000 : "C"
Init AK SPI Flash finish.
akspi master initialize success, use for DMA mode.
input: akgpio-keys as /devices/platform/akgpio-keys/input/input0
We're Using Internal RC OSC.
AK RTC, (c) 2010 ANYKA 
i2c /dev entries driver
AK MCI Driver (c) 2010 ANYKA
akmci_probe : MCI
## MMC Power: GPIO-1 Setup
akmci ak_mci.0: Mci Interface driver.mmc0. using l2dma, sw IRQ. detect mode:GPIO detect.
akmci_probe : SDIO
## MMC Power: GPIO-1 Setup
mmc0: host does not support reading read-only switch. assuming write-enable.
mmc0: new SDHC card at address b368
mmcblk0: mmc0:b368 SMI   14.9 GiB 
 mmcblk0: p1
akmci ak_sdio.1: Mci Interface driver.mmc1. using l2dma, hw IRQ. detect mode:plugin alway.
Registered led device: system_state_led
Registered led device: red_led
Registered led device: blue_led
TCP: cubic registered
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
/home/zhout/nooie/nooie_ipc_code_base/kernel/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
devtmpfs: mounted
Freeing init memory: 108K
aksensor_module_init
soc-camera-pdrv soc-camera-pdrv: Probing soc-camera-pdrv
ak_camera ak_camera.39: AK Camera driver attached to camera 0
f22_set_power_on
f22_probe_id id:0xf37
f22_probe_id id:0xf37
aksensor 0-0001: probe_sensors Probing Sensor ID: 0xf37
ak_camera ak_camera.39: AK Camera driver detached from camera 0
ak_camera ak_camera.39: AK Camera driver loaded
ak_info_dump_init