The "BOOM!" Section from bit and error counter run of PS code

[Abraxas3d]

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Toggle RX_INVERT to test 180 degree phase shift.
We read MSK_CONTROL: (0x00001907@000c)
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
percent_error was greater than 49.0 percent so we resync.
resync PRBS by setting and then clearing bit 3 of PRBS_CONTROL.
Write 0x00000009 to PRBS_CONTROL. PRBS active, no errors inserted, PRBS sync.
We read PRBS_CONTROL: (0x00000009@0040)
We read PRBS_CONTROL: (0x00000001@0040)
We read MSK_CONTROL: (0x00001907@000c)
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Total PRBS_BIT_COUNT for loop: (0x0000011d@0050)
Total PRBS_ERROR_COUNT for loop: (0x00000098@0054)
(1) 46.3 1543013 -2689242 0x000f006f
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Total PRBS_BIT_COUNT for loop: (0x0000038f@0050)
Total PRBS_ERROR_COUNT for loop: (0x000001bf@0054)
(1) 49.1 1602147 -2761487 0x000f006f
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Toggle RX_INVERT to test 180 degree phase shift.
PTT and loopback enabled, 25 samples (0x19) discarded (61.44 MHz to 2.5 MHz)
We read MSK_CONTROL: (0x00001903@000c)
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
percent_error was greater than 49.0 percent so we resync.
resync PRBS by setting and then clearing bit 3 of PRBS_CONTROL.
Write 0x00000009 to PRBS_CONTROL. PRBS active, no errors inserted, PRBS sync.
We read PRBS_CONTROL: (0x00000009@0040)
We read PRBS_CONTROL: (0x00000001@0040)
We read MSK_CONTROL: (0x00001903@000c)
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Total PRBS_BIT_COUNT for loop: (0x00000000@0050)
Total PRBS_ERROR_COUNT for loop: (0x00000000@0054)
(1) nan 1578962 -2794061 0x000f006f
BOOM!

[Abraxas3d]

Separated out which loop the bit and error counts come from:

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Total PRBS_BIT_COUNT for loop (1):   (0x00000548@0050)
Total PRBS_ERROR_COUNT for loop (1): (0x0000028f@0054)
(1) 48.4 -130920 -4019812 0x000f007c
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Total PRBS_BIT_COUNT for loop (1):   (0x00000564@0050)
Total PRBS_ERROR_COUNT for loop (1): (0x00000297@0054)
(1) 48.0 -180169 -3985595 0x000f007c
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Total PRBS_BIT_COUNT for loop (1):   (0x0000058f@0050)
Total PRBS_ERROR_COUNT for loop (1): (0x000002b0@0054)
(1) 48.3 -64865 -4022947 0x000f007c
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Total PRBS_BIT_COUNT for loop (1):   (0x000005a1@0050)
Total PRBS_ERROR_COUNT for loop (1): (0x000002ba@0054)
(1) 48.4 553 -4042957 0x000f007c
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Total PRBS_BIT_COUNT for loop (1):   (0x000005b3@0050)
Total PRBS_ERROR_COUNT for loop (1): (0x000002c3@0054)
(1) 48.5 -71731 -4003265 0x000f007c
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Total PRBS_BIT_COUNT for loop (1):   (0x000005c9@0050)
Total PRBS_ERROR_COUNT for loop (1): (0x000002cd@0054)
(1) 48.4 -129783 -4009467 0x000f007c
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Total PRBS_BIT_COUNT for loop (1):   (0x000005e7@0050)
Total PRBS_ERROR_COUNT for loop (1): (0x000002dd@0054)
(1) 48.5 -185541 -4005848 0x000f007c
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Total PRBS_BIT_COUNT for loop (1):   (0x00000607@0050)
Total PRBS_ERROR_COUNT for loop (1): (0x000002ee@0054)
(1) 48.6 -181487 -4019980 0x000f007c
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Total PRBS_BIT_COUNT for loop (1):   (0x00000636@0050)
Total PRBS_ERROR_COUNT for loop (1): (0x0000030b@0054)
(1) 49.0 -124077 -4033998 0x000f007c
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Total PRBS_BIT_COUNT for loop (1):   (0x00000659@0050)
Total PRBS_ERROR_COUNT for loop (1): (0x00000320@0054)
(1) 49.2 -102763 -4036920 0x000f007c
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Toggle RX_INVERT to test 180 degree phase shift.
We read MSK_CONTROL: (0x00001907@000c)
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
percent_error was greater than 49.0 percent so we resync.
resync PRBS by setting and then clearing bit 3 of PRBS_CONTROL.
Write 0x00000009 to PRBS_CONTROL. PRBS active, no errors inserted, PRBS sync.
We read PRBS_CONTROL: (0x00000009@0040)
We read PRBS_CONTROL: (0x00000001@0040)
We read MSK_CONTROL: (0x00001907@000c)
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Total PRBS_BIT_COUNT for loop (1):   (0x00000030@0050)
Total PRBS_ERROR_COUNT for loop (1): (0x0000001f@0054)
(1) 62.0 -173888 -4083419 0x000f007c
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Toggle RX_INVERT to test 180 degree phase shift.
PTT and loopback enabled, 25 samples (0x19) discarded (61.44 MHz to 2.5 MHz)
We read MSK_CONTROL: (0x00001903@000c)
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
percent_error was greater than 49.0 percent so we resync.
resync PRBS by setting and then clearing bit 3 of PRBS_CONTROL.
Write 0x00000009 to PRBS_CONTROL. PRBS active, no errors inserted, PRBS sync.
We read PRBS_CONTROL: (0x00000009@0040)
We read PRBS_CONTROL: (0x00000001@0040)
We read MSK_CONTROL: (0x00001903@000c)
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Total PRBS_BIT_COUNT for loop (1):   (0x00000016@0050)
Total PRBS_ERROR_COUNT for loop (1): (0x00000011@0054)
(1) 77.3 -217153 -4085623 0x000f007c
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Toggle RX_INVERT to test 180 degree phase shift.
We read MSK_CONTROL: (0x00001907@000c)
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
percent_error was greater than 49.0 percent so we resync.
resync PRBS by setting and then clearing bit 3 of PRBS_CONTROL.
Write 0x00000009 to PRBS_CONTROL. PRBS active, no errors inserted, PRBS sync.
We read PRBS_CONTROL: (0x00000009@0040)
We read PRBS_CONTROL: (0x00000001@0040)
We read MSK_CONTROL: (0x00001907@000c)
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Total PRBS_BIT_COUNT for loop (1):   (0x00000000@0050)
Total PRBS_ERROR_COUNT for loop (1): (0x00000000@0054)
(1) nan -184778 -4094417 0x000f007c
BOOM!