KiteUtils.jl/src/_show.jl at ce80becc8af8d8661b25c015b99bef087647e973 · OpenSourceAWE/KiteUtils.jl · GitHub

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
# SPDX-FileCopyrightText: 2022 Uwe Fechner
# SPDX-License-Identifier: MIT

# DO NOT EDIT THIS FILE
# This file was generated by src/build.jl
# Edit src/sysstate.yaml instead

function Base.show(io::IO, st::SysState)
    println(io, "time [s]:          ", st.time)
    println(io, "t_sim [s]:         ", st.t_sim)
    println(io, "sys_state [-]:     ", st.sys_state)
    println(io, "cycle [-]:         ", st.cycle)
    println(io, "fig_8 [-]:         ", st.fig_8)
    println(io, "e_mech [Wh]:       ", st.e_mech)
    println(io, "orient [-]:        ", st.orient)
    println(io, "turn_rates [rad/s]:", st.turn_rates)
    println(io, "elevation [rad]:   ", st.elevation)
    println(io, "azimuth [rad]:     ", st.azimuth)
    println(io, "l_tether [m]:      ", st.l_tether)
    println(io, "v_reelout [m/s]:   ", st.v_reelout)
    println(io, "winch_force [N]:   ", st.winch_force)
    println(io, "depower [0..1]:    ", st.depower)
    println(io, "steering [-1..1]:  ", st.steering)
    println(io, "kcu_steering [-1..1]:", st.kcu_steering)
    println(io, "set_steering [-1..1]:", st.set_steering)
    println(io, "heading [rad]:     ", st.heading)
    println(io, "heading_rate [rad/s]:", st.heading_rate)
    println(io, "course [rad]:      ", st.course)
    println(io, "bearing [rad]:     ", st.bearing)
    println(io, "attractor [rad]:   ", st.attractor)
    println(io, "v_app [m/s]:       ", st.v_app)
    println(io, "v_wind_gnd [m/s]:  ", st.v_wind_gnd)
    println(io, "v_wind_200m [m/s]: ", st.v_wind_200m)
    println(io, "v_wind_kite [m/s]: ", st.v_wind_kite)
    println(io, "AoA [rad]:         ", st.AoA)
    println(io, "side_slip [rad]:   ", st.side_slip)
    println(io, "alpha3 [rad]:      ", st.alpha3)
    println(io, "alpha4 [rad]:      ", st.alpha4)
    println(io, "CL2 [-]:           ", st.CL2)
    println(io, "CD2 [-]:           ", st.CD2)
    println(io, "aero_force_b [N]:  ", st.aero_force_b)
    println(io, "aero_moment_b [Nm]:", st.aero_moment_b)
    println(io, "tether_induced_force [N]:", st.tether_induced_force)
    println(io, "tether_induced_moment [Nm]:", st.tether_induced_moment)
    println(io, "twist_angles [rad]:", st.twist_angles)
    println(io, "vel_kite [m/s]:    ", st.vel_kite)
    println(io, "acc [m/s²]:        ", st.acc)
    println(io, "X [m]:             ", st.X)
    println(io, "Y [m]:             ", st.Y)
    println(io, "Z [m]:             ", st.Z)
    println(io, "set_torque [Nm]:   ", st.set_torque)
    println(io, "set_speed [m/s]:   ", st.set_speed)
    println(io, "set_force [N]:     ", st.set_force)
    println(io, "roll [rad]:        ", st.roll)
    println(io, "pitch [rad]:       ", st.pitch)
    println(io, "yaw [rad]:         ", st.yaw)
    println(io, "var_01 [-]:        ", st.var_01)
    println(io, "var_02 [-]:        ", st.var_02)
    println(io, "var_03 [-]:        ", st.var_03)
    println(io, "var_04 [-]:        ", st.var_04)
    println(io, "var_05 [-]:        ", st.var_05)
    println(io, "var_06 [-]:        ", st.var_06)
    println(io, "var_07 [-]:        ", st.var_07)
    println(io, "var_08 [-]:        ", st.var_08)
    println(io, "var_09 [-]:        ", st.var_09)
    println(io, "var_10 [-]:        ", st.var_10)
    println(io, "var_11 [-]:        ", st.var_11)
    println(io, "var_12 [-]:        ", st.var_12)
    println(io, "var_13 [-]:        ", st.var_13)
    println(io, "var_14 [-]:        ", st.var_14)
    println(io, "var_15 [-]:        ", st.var_15)
    println(io, "var_16 [-]:        ", st.var_16)
end