RSSI and FlexFreq all updated all works under SDCC 4.5.0

Author: OpenUAS

Firmware/bootloader/flash.c

@@ -278,7 +278,7 @@ __at(FLASH_CALIBRATION_AREA_HIGH) uint8_t __code calibration[FLASH_CALIBRATION_A
 __at(FLASH_CALIBRATION_CRC_HIGH)	uint8_t __code calibration_crc;
 
 void
-flash_transfer_calibration()
+flash_transfer_calibration(void)
 {
 	uint8_t idx, crc = 0;
 
@@ -318,7 +318,7 @@ flash_transfer_calibration()
 #if defined BOARD_mro900
 static __at(FLASH_CALIBRATION_OSC_HIGH) uint8_t __code calibration;
 
-void flash_transfer_calibration()
+void flash_transfer_calibration(void)
 {
 	if (flash_read_byte(FLASH_CALIBRATION_OSC) != 0xFF)
 	{

Firmware/bootloader/flash.h

@@ -92,7 +92,7 @@ void	flash_write_byte(uint16_t address, uint8_t c);
 uint8_t	flash_read_byte(uint16_t address);
 #endif // FLASH_BANKS
 #if defined BOARD_rfd900a || defined BOARD_rfd900p || defined BOARD_mro900
-void flash_transfer_calibration();
+void flash_transfer_calibration(void);
 #endif
 
 #endif // _FLASH_H_

Firmware/include/board.h

@@ -111,7 +111,7 @@
 #define BOARD_rfd900p
 # include "board_rfd900p.h"
 #elif defined(BOARD_rfd900ue)
-// #define INCLUDE_AES
+//#define INCLUDE_AES
 #define BOARD_rfd900u
 # include "board_rfd900u.h"
 #elif defined(BOARD_ism01a)
@@ -126,4 +126,7 @@
 # error Must define a BOARD_ value before including this file.
 #endif
 
+/// @brief The FLEX_FREQ is an extra unofficial option to set frequency independent of bootloader settings
+#define FLEX_FREQ 1 
+
 #endif // _BOARD_H_

Firmware/include/board_3dr1060.h

@@ -28,13 +28,9 @@
 
 ///
 /// @file	board_3dr1060.h
-///
-///
+///		Board-specific definitions for the 3DR1060 board
 ///
 
-/// @file	board.h
-///		Board definitions for the 3DR1060 board
- 
 #ifndef _BOARD_3DR1060_H
 #define _BOARD_3DR1060_H
 

Firmware/include/board_hb1060.h

@@ -29,12 +29,9 @@
 ///
 /// @file	board_hb1060.h
 ///
-/// Board-specific definitions for the RF50-DEMO board.
+/// Board-specific definitions for the HB1060 board.
 ///
 
-/// @file	board.h
-///		Board definitions for the HB1060 board
- 
 #ifndef _BOARD_HB1060_H
 #define _BOARD_HB1060_H
 

Firmware/include/board_ism01a.h

@@ -27,14 +27,11 @@
 //
 
 ///
-/// @file	board_rf50.h
+/// @file	board_ism01a.h
 ///
-/// Board-specific definitions for the RF50-DEMO board.
+/// Board-specific definitions for the ISM01A board.
 ///
 
-/// @file	board.h
-///		Board definitions for the ISM01A board
- 
 #ifndef _BOARD_ISM01A_H
 #define _BOARD_ISM01A_H
 

Firmware/include/rules.mk

@@ -27,6 +27,7 @@
 #
 # Common rules and targets for the HopeRF radio apps
 #
+PPRZLINK_VERSION ?= PPRZLINK_2
 
 ifeq ($(BOARD),)
 $(error Must define BOARD before attempting to build)

Firmware/include/rules_3dr1060.mk

@@ -28,7 +28,7 @@
 #
 # Configuration options for the 3DR1060 board.
 #
-FREQUENCIES			 = 433 915
-XRAM_SIZE			 = 4096
+FREQUENCIES			 = 433 868 915
+XRAM_SIZE			 = 4352
 LDFLAGS				+= --model-large --iram-size 256 --xram-size $(XRAM_SIZE) --code-loc 0x400 --code-size 0x00f400 --stack-size 64
 BOOTLDFLAGS			 = --iram-size 256 --xram-size $(XRAM_SIZE) --stack-size 64 --nostdlib -Wl -bHIGHCSEG=0xf800

Firmware/include/rules_hb1060.mk

@@ -29,6 +29,6 @@
 # Configuration options for the HB1060 board.
 #
 FREQUENCIES			 = 433 868 915
-XRAM_SIZE			 = 4096
+XRAM_SIZE			 = 4352
 LDFLAGS				+= --model-large --iram-size 256 --xram-size $(XRAM_SIZE) --code-loc 0x400 --code-size 0x00f400 --stack-size 64
 BOOTLDFLAGS			 = --iram-size 256 --xram-size $(XRAM_SIZE) --stack-size 64 --nostdlib -Wl -bHIGHCSEG=0xf800

Firmware/include/rules_ism01a.mk

@@ -29,6 +29,6 @@
 # Configuration options for the ISM01A board.
 #
 FREQUENCIES			 = 433 868 915
-XRAM_SIZE			 = 4096
+XRAM_SIZE			 = 4352
 LDFLAGS				+= --model-large --iram-size 256 --xram-size $(XRAM_SIZE) --code-loc 0x400 --code-size 0x00f400 --stack-size 64
 BOOTLDFLAGS			 = --iram-size 256 --xram-size $(XRAM_SIZE) --stack-size 64 --nostdlib -Wl -bHIGHCSEG=0xf800