Build(deps): Bump step-security/harden-runner from 2.11.0 to 2.12.2 (#1193)

Bumps
[step-security/harden-runner](https://github.com/step-security/harden-runner)
from 2.11.0 to 2.12.2.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/step-security/harden-runner/releases">step-security/harden-runner's
releases</a>.</em></p>
<blockquote>
<h2>v2.12.2</h2>
<h2>What's Changed</h2>
<p>Added HTTPS Monitoring for additional destinations -
*.githubusercontent.com
Bug fixes:</p>
<ul>
<li>Implicitly allow local multicast, local unicast and broadcast IP
addresses in block mode</li>
<li>Increased policy map size for block mode</li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/step-security/harden-runner/compare/v2...v2.12.2">https://github.com/step-security/harden-runner/compare/v2...v2.12.2</a></p>
<h2>v2.12.1</h2>
<h2>What's Changed</h2>
<ul>
<li>Detection capabilities have been upgraded to better recognize
attempts at runner tampering. These improvements are informed by
real-world incident learnings, including analysis of anomalous behaviors
observed in the tj-actions and reviewdog supply chain attack.</li>
<li>Resolved an issue where the block policy was not enforced correctly
when the GitHub Actions job was running inside a container on a
self-hosted VM runner.</li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/step-security/harden-runner/compare/v2...v2.12.1">https://github.com/step-security/harden-runner/compare/v2...v2.12.1</a></p>
<h2>v2.12.0</h2>
<h2>What's Changed</h2>
<ol>
<li>
<p>A new option, <code>disable-sudo-and-containers</code>, is now
available to replace the <code>disable-sudo policy</code>, addressing
Docker-based privilege escalation (<a
href="https://github.com/step-security/harden-runner/security/advisories/GHSA-mxr3-8whj-j74r">CVE-2025-32955</a>).
More details can be found in this <a
href="https://www.stepsecurity.io/blog/evolving-harden-runners-disable-sudo-policy-for-improved-runner-security">blog
post</a>.</p>
</li>
<li>
<p>New detections have been added based on insights from the tj-actions
and reviewdog actions incidents.</p>
</li>
</ol>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/step-security/harden-runner/compare/v2...v2.12.0">https://github.com/step-security/harden-runner/compare/v2...v2.12.0</a></p>
<h2>v2.11.1</h2>
<h2>What's Changed</h2>
<ul>
<li>cache: add support for GitHub Actions cache v2 by <a
href="https://github.com/h0x0er"><code>@​h0x0er</code></a> in <a
href="https://redirect.github.com/step-security/harden-runner/pull/529">step-security/harden-runner#529</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/step-security/harden-runner/compare/v2...v2.11.1">https://github.com/step-security/harden-runner/compare/v2...v2.11.1</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/step-security/harden-runner/commit/6c439dc8bdf85cadbbce9ed30d1c7b959517bc49"><code>6c439dc</code></a>
Merge pull request <a
href="https://redirect.github.com/step-security/harden-runner/issues/562">#562</a>
from step-security/rc-22</li>
<li><a
href="https://github.com/step-security/harden-runner/commit/bf5688696d0b2cf8221eadb38e4232386015763a"><code>bf56886</code></a>
update agent</li>
<li><a
href="https://github.com/step-security/harden-runner/commit/5436dac7b5fa76a1a179168f5f4de86c00e22c84"><code>5436dac</code></a>
update agent</li>
<li><a
href="https://github.com/step-security/harden-runner/commit/88d305a3530acfa6d1939000baaa571e520df9c8"><code>88d305a</code></a>
update agent</li>
<li><a
href="https://github.com/step-security/harden-runner/commit/b976878278dbe3bc16039f7165b8faf809c50297"><code>b976878</code></a>
update agent</li>
<li><a
href="https://github.com/step-security/harden-runner/commit/875cc92db280a03598e7492a3e6c165c689f7af6"><code>875cc92</code></a>
Update agent</li>
<li><a
href="https://github.com/step-security/harden-runner/commit/002fdce3c6a235733a90a27c80493a3241e56863"><code>002fdce</code></a>
Merge pull request <a
href="https://redirect.github.com/step-security/harden-runner/issues/544">#544</a>
from step-security/rc-21</li>
<li><a
href="https://github.com/step-security/harden-runner/commit/2489e3fcb3d00eac3cb27c9b490431a4d26eac58"><code>2489e3f</code></a>
Merge branch 'main' into rc-21</li>
<li><a
href="https://github.com/step-security/harden-runner/commit/75dd441a816c3c7ea21313ec8ff21d9f7b69f534"><code>75dd441</code></a>
Merge pull request <a
href="https://redirect.github.com/step-security/harden-runner/issues/555">#555</a>
from step-security/dependabot/github_actions/step-sec...</li>
<li><a
href="https://github.com/step-security/harden-runner/commit/4381ace9c4db180c9cc8ff9a6dd4220f17a95690"><code>4381ace</code></a>
Bump step-security/publish-unit-test-result-action from 2.19.0 to
2.20.0</li>
<li>Additional commits viewable in <a
href="https://github.com/step-security/harden-runner/compare/4d991eb9b905ef189e4c376166672c3f2f230481...6c439dc8bdf85cadbbce9ed30d1c7b959517bc49">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=step-security/harden-runner&package-manager=github_actions&previous-version=2.11.0&new-version=2.12.2)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Author: dependabot[bot]

.github/workflows/base_build.yml

@@ -65,7 +65,7 @@ jobs:
     timeout-minutes: 60
     steps:
       - name: Harden Runner
-        uses: step-security/harden-runner@4d991eb9b905ef189e4c376166672c3f2f230481 # v2.11.0
+        uses: step-security/harden-runner@6c439dc8bdf85cadbbce9ed30d1c7b959517bc49 # v2.12.2
         with:
           egress-policy: audit
 
@@ -87,7 +87,7 @@ jobs:
     timeout-minutes: 60
     steps:
       - name: Harden Runner
-        uses: step-security/harden-runner@4d991eb9b905ef189e4c376166672c3f2f230481 # v2.11.0
+        uses: step-security/harden-runner@6c439dc8bdf85cadbbce9ed30d1c7b959517bc49 # v2.12.2
         with:
           egress-policy: audit
 

.github/workflows/coverity.yml

@@ -21,7 +21,7 @@ jobs:
     timeout-minutes: 90
     steps:
     - name: 'Harden Runner'
-      uses: step-security/harden-runner@4d991eb9b905ef189e4c376166672c3f2f230481 # v2.11.0
+      uses: step-security/harden-runner@6c439dc8bdf85cadbbce9ed30d1c7b959517bc49 # v2.12.2
       with:
         egress-policy: audit
 

.github/workflows/dependency-review.yml

@@ -17,7 +17,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Harden Runner
-        uses: step-security/harden-runner@4d991eb9b905ef189e4c376166672c3f2f230481 # v2.11.0
+        uses: step-security/harden-runner@6c439dc8bdf85cadbbce9ed30d1c7b959517bc49 # v2.12.2
         with:
           egress-policy: audit
 

.github/workflows/docker_build.yml

@@ -40,7 +40,7 @@ jobs:
 
     steps:
       - name: Harden Runner
-        uses: step-security/harden-runner@4d991eb9b905ef189e4c376166672c3f2f230481 # v2.11.0
+        uses: step-security/harden-runner@6c439dc8bdf85cadbbce9ed30d1c7b959517bc49 # v2.12.2
         with:
           egress-policy: audit
       - name: Checkout repository
@@ -72,7 +72,7 @@ jobs:
 
     steps:
       - name: Harden Runner
-        uses: step-security/harden-runner@4d991eb9b905ef189e4c376166672c3f2f230481 # v2.11.0
+        uses: step-security/harden-runner@6c439dc8bdf85cadbbce9ed30d1c7b959517bc49 # v2.12.2
         with:
           egress-policy: audit
       - name: Checkout repository

.github/workflows/github_pages_update.yml

@@ -29,7 +29,7 @@ jobs:
     timeout-minutes: 20
     steps:
       - name: Secure the runner
-        uses: step-security/harden-runner@4d991eb9b905ef189e4c376166672c3f2f230481 # v2.11.0
+        uses: step-security/harden-runner@6c439dc8bdf85cadbbce9ed30d1c7b959517bc49 # v2.12.2
         with:
           egress-policy: audit
 

.github/workflows/gtest-bare-metal.yml

@@ -60,7 +60,7 @@ jobs:
 
     steps:
       - name: Harden Runner
-        uses: step-security/harden-runner@4d991eb9b905ef189e4c376166672c3f2f230481 # v2.11.0
+        uses: step-security/harden-runner@6c439dc8bdf85cadbbce9ed30d1c7b959517bc49 # v2.12.2
         with:
           egress-policy: audit
 
@@ -94,7 +94,7 @@ jobs:
     runs-on: [Linux, self-hosted, DPDK]
     steps:
       - name: Harden Runner
-        uses: step-security/harden-runner@4d991eb9b905ef189e4c376166672c3f2f230481 # v2.11.0
+        uses: step-security/harden-runner@6c439dc8bdf85cadbbce9ed30d1c7b959517bc49 # v2.12.2
         with:
           egress-policy: audit
 

.github/workflows/linter.yml

@@ -14,7 +14,7 @@ jobs:
 
     steps:
       - name: Harden Runner
-        uses: step-security/harden-runner@4d991eb9b905ef189e4c376166672c3f2f230481 # v2.11.0
+        uses: step-security/harden-runner@6c439dc8bdf85cadbbce9ed30d1c7b959517bc49 # v2.12.2
         with:
           egress-policy: audit
 

.github/workflows/scorecards.yml

@@ -32,7 +32,7 @@ jobs:
 
     steps:
       - name: Harden Runner
-        uses: step-security/harden-runner@4d991eb9b905ef189e4c376166672c3f2f230481 # v2.11.0
+        uses: step-security/harden-runner@6c439dc8bdf85cadbbce9ed30d1c7b959517bc49 # v2.12.2
         with:
           egress-policy: audit
 

.github/workflows/validation-tests.yml

@@ -120,7 +120,7 @@ jobs:
       pipenv-activate: ${{ steps.pipenv-install.outputs.VIRTUAL_ENV }}
     steps:
       - name: 'preparation: Harden Runner'
-        uses: step-security/harden-runner@4d991eb9b905ef189e4c376166672c3f2f230481 # v2.11.0
+        uses: step-security/harden-runner@6c439dc8bdf85cadbbce9ed30d1c7b959517bc49 # v2.12.2
         with:
           egress-policy: audit
 
@@ -202,7 +202,7 @@ jobs:
       PYTEST_RETRIES: '3'
     steps:
       - name: 'preparation: Harden Runner'
-        uses: step-security/harden-runner@4d991eb9b905ef189e4c376166672c3f2f230481 # v2.11.0
+        uses: step-security/harden-runner@6c439dc8bdf85cadbbce9ed30d1c7b959517bc49 # v2.12.2
         with:
           egress-policy: audit
 

action.yml

@@ -26,7 +26,7 @@ runs:
   using: 'composite'
   steps:
     - name: Harden Runner
-      uses: step-security/harden-runner@4d991eb9b905ef189e4c376166672c3f2f230481 # v2.11.0
+      uses: step-security/harden-runner@6c439dc8bdf85cadbbce9ed30d1c7b959517bc49 # v2.12.2
       with:
         egress-policy: audit