README

README file for PCRE2 (Perl-compatible regular expression library)
==================================================================

PCRE2 is a re-working of the original PCRE1 library to provide an entirely new
API. Since its initial release in 2015, there has been further development of
the code and it now differs from PCRE1 in more than just the API. There are new
features, and the internals have been improved. The original PCRE1 library is
now obsolete and no longer maintained. The latest release of PCRE2 is available
in .tar.gz, tar.bz2, or .zip form from this GitHub repository:

https://github.com/PCRE2Project/pcre2/releases

There is a mailing list for discussion about the development of PCRE2 at
pcre2-dev@googlegroups.com. You can subscribe by sending an email to
pcre2-dev+subscribe@googlegroups.com.

You can access the archives and also subscribe or manage your subscription
here:

https://groups.google.com/g/pcre2-dev

Please read the NEWS file if you are upgrading from a previous release. The
contents of this README file are:

  The PCRE2 APIs
  Documentation for PCRE2
  Building PCRE2 on non-Unix-like systems
  Building PCRE2 without using autotools
  Building PCRE2 using autotools
  Retrieving configuration information
  Shared libraries
  Cross-compiling using autotools
  Making new tarballs
  Testing PCRE2
  Character tables
  File manifest


The PCRE2 APIs
--------------

PCRE2 is written in C, and it has its own API. There are three sets of
functions, one for the 8-bit library, which processes strings of bytes, one for
the 16-bit library, which processes strings of 16-bit values, and one for the
32-bit library, which processes strings of 32-bit values. Unlike PCRE1, there
are no C++ wrappers.

The distribution does contain a set of C wrapper functions for the 8-bit
library that are based on the POSIX regular expression API (see the pcre2posix
man page). These are built into a library called libpcre2-posix. Note that this
just provides a POSIX calling interface to PCRE2; the regular expressions
themselves still follow Perl syntax and semantics. The POSIX API is restricted,
and does not give full access to all of PCRE2's facilities.

The header file for the POSIX-style functions is called pcre2posix.h. The
official POSIX name is regex.h, but I did not want to risk possible problems
with existing files of that name by distributing it that way. To use PCRE2 with
an existing program that uses the POSIX API, pcre2posix.h will have to be
renamed or pointed at by a link (or the program modified, of course). See the
pcre2posix documentation for more details.


Documentation for PCRE2
-----------------------

If you install PCRE2 in the normal way on a Unix-like system, you will end up
with a set of man pages whose names all start with "pcre2". The one that is
just called "pcre2" lists all the others. In addition to these man pages, the
PCRE2 documentation is supplied in two other forms:

  1. There are files called doc/pcre2.txt, doc/pcre2grep.txt, and
     doc/pcre2test.txt in the source distribution. The first of these is a
     concatenation of the text forms of all the section 3 man pages except the
     listing of pcre2demo.c and those that summarize individual functions. The
     other two are the text forms of the section 1 man pages for the pcre2grep
     and pcre2test commands. These text forms are provided for ease of scanning
     with text editors or similar tools. They are installed in
     <prefix>/share/doc/pcre2, where <prefix> is the installation prefix
     (defaulting to /usr/local).

  2. A set of files containing all the documentation in HTML form, hyperlinked
     in various ways, and rooted in a file called index.html, is distributed in
     doc/html and installed in <prefix>/share/doc/pcre2/html.


Building PCRE2 on non-Unix-like systems
---------------------------------------

For a non-Unix-like system, please read the file NON-AUTOTOOLS-BUILD, though if
your system supports the use of "configure" and "make" you may be able to build
PCRE2 using autotools in the same way as for many Unix-like systems.

PCRE2 can also be configured using CMake, which can be run in various ways
(command line, GUI, etc). This creates Makefiles, solution files, etc. The file
NON-AUTOTOOLS-BUILD has information about CMake.

PCRE2 has been compiled on many different operating systems. It should be
straightforward to build PCRE2 on any system that has a Standard C compiler and
library, because it uses only Standard C functions.


Building PCRE2 without using autotools
--------------------------------------

The use of autotools (in particular, libtool) is problematic in some
environments, even some that are Unix or Unix-like. See the NON-AUTOTOOLS-BUILD
file for ways of building PCRE2 without using autotools.


Building PCRE2 using autotools
------------------------------

The following instructions assume the use of the widely used "configure; make;
make install" (autotools) process.

If you have downloaded and unpacked a PCRE2 release tarball, run the
"configure" command from the PCRE2 directory, with your current directory set
to the directory where you want the files to be created. This command is a
standard GNU "autoconf" configuration script, for which generic instructions
are supplied in the file INSTALL.

The files in the GitHub repository do not contain "configure". If you have
downloaded the PCRE2 source files from GitHub, before you can run "configure"
you must run the shell script called autogen.sh. This runs a number of
autotools to create a "configure" script (you must of course have the autotools
commands installed in order to do this).

Most commonly, people build PCRE2 within its own distribution directory, and in
this case, on many systems, just running "./configure" is sufficient. However,
the usual methods of changing standard defaults are available. For example:

CFLAGS='-O2 -Wall' ./configure --prefix=/opt/local

This command specifies that the C compiler should be run with the flags '-O2
-Wall' instead of the default, and that "make install" should install PCRE2
under /opt/local instead of the default /usr/local.

If you want to build in a different directory, just run "configure" with that
directory as current. For example, suppose you have unpacked the PCRE2 source
into /source/pcre2/pcre2-xxx, but you want to build it in
/build/pcre2/pcre2-xxx:

cd /build/pcre2/pcre2-xxx
/source/pcre2/pcre2-xxx/configure

PCRE2 is written in C and is normally compiled as a C library. However, it is
possible to build it as a C++ library, though the provided building apparatus
does not have any features to support this.

There are some optional features that can be included or omitted from the PCRE2
library. They are also documented in the pcre2build man page.

. By default, both shared and static libraries are built. You can change this
  by adding one of these options to the "configure" command:

  --disable-shared
  --disable-static

  Setting --disable-shared ensures that PCRE2 libraries are built as static
  libraries. The binaries that are then created as part of the build process
  (for example, pcre2test and pcre2grep) are linked statically with one or more
  PCRE2 libraries, but may also be dynamically linked with other libraries such
  as libc. If you want these binaries to be fully statically linked, you can
  set LDFLAGS like this:

  LDFLAGS=--static ./configure --disable-shared

  Note the two hyphens in --static. Of course, this works only if static
  versions of all the relevant libraries are available for linking. See also
  "Shared libraries" below.

. By default, only the 8-bit library is built. If you add --enable-pcre2-16 to
  the "configure" command, the 16-bit library is also built. If you add
  --enable-pcre2-32 to the "configure" command, the 32-bit library is also
  built. If you want only the 16-bit or 32-bit library, use --disable-pcre2-8
  to disable building the 8-bit library.

. If you want to include support for just-in-time (JIT) compiling, which can
  give large performance improvements on certain platforms, add --enable-jit to
  the "configure" command. This support is available only for certain hardware
  architectures. If you try to enable it on an unsupported architecture, there
  will be a compile time error. If in doubt, use --enable-jit=auto, which
  enables JIT only if the current hardware is supported.

. If you are enabling JIT under SELinux environment you may also want to add
  --enable-jit-sealloc, which enables the use of an executable memory allocator
  that is compatible with SELinux. Warning: this allocator is experimental!
  It does not support fork() operation and may crash when no disk space is
  available. This option has no effect if JIT is disabled.

. If you do not want to make use of the default support for UTF-8 Unicode
  character strings in the 8-bit library, UTF-16 Unicode character strings in
  the 16-bit library, or UTF-32 Unicode character strings in the 32-bit
  library, you can add --disable-unicode to the "configure" command. This
  reduces the size of the libraries. It is not possible to configure one
  library with Unicode support, and another without, in the same configuration.
  It is also not possible to use --enable-ebcdic (see below) with Unicode
  support, so if this option is set, you must also use --disable-unicode.

  When Unicode support is available, the use of a UTF encoding still has to be
  enabled by setting the PCRE2_UTF option at run time or starting a pattern
  with (*UTF). When PCRE2 is compiled with Unicode support, its input can only
  either be ASCII or UTF-8/16/32, even when running on EBCDIC platforms.

  As well as supporting UTF strings, Unicode support includes support for the
  \P, \p, and \X sequences that recognize Unicode character properties.
  However, only a subset of Unicode properties are supported; see the
  pcre2pattern man page for details. Escape sequences such as \d and \w in
  patterns do not by default make use of Unicode properties, but can be made to
  do so by setting the PCRE2_UCP option or starting a pattern with (*UCP).

. You can build PCRE2 to recognize either CR or LF or the sequence CRLF, or any
  of the preceding, or any of the Unicode newline sequences, or the NUL (zero)
  character as indicating the end of a line. Whatever you specify at build time
  is the default; the caller of PCRE2 can change the selection at run time. The
  default newline indicator is a single LF character (the Unix standard). You
  can specify the default newline indicator by adding --enable-newline-is-cr,
  --enable-newline-is-lf, --enable-newline-is-crlf,
  --enable-newline-is-anycrlf, --enable-newline-is-any, or
  --enable-newline-is-nul to the "configure" command, respectively.

. By default, the sequence \R in a pattern matches any Unicode line ending
  sequence. This is independent of the option specifying what PCRE2 considers
  to be the end of a line (see above). However, the caller of PCRE2 can
  restrict \R to match only CR, LF, or CRLF. You can make this the default by
  adding --enable-bsr-anycrlf to the "configure" command (bsr = "backslash R").

. In a pattern, the escape sequence \C matches a single code unit, even in a
  UTF mode. This can be dangerous because it breaks up multi-code-unit
  characters. You can build PCRE2 with the use of \C permanently locked out by
  adding --enable-never-backslash-C (note the upper case C) to the "configure"
  command. When \C is allowed by the library, individual applications can lock
  it out by calling pcre2_compile() with the PCRE2_NEVER_BACKSLASH_C option.

. PCRE2 has a counter that limits the depth of nesting of parentheses in a
  pattern. This limits the amount of system stack that a pattern uses when it
  is compiled. The default is 250, but you can change it by setting, for
  example,

  --with-parens-nest-limit=500

. PCRE2 has a counter that can be set to limit the amount of computing resource
  it uses when matching a pattern. If the limit is exceeded during a match, the
  match fails. The default is ten million. You can change the default by
  setting, for example,

  --with-match-limit=500000

  on the "configure" command. This is just the default; individual calls to
  pcre2_match() or pcre2_dfa_match() can supply their own value. There is more
  discussion in the pcre2api man page (search for pcre2_set_match_limit).

. There is a separate counter that limits the depth of nested backtracking
  (pcre2_match()) or nested function calls (pcre2_dfa_match()) during a
  matching process, which indirectly limits the amount of heap memory that is
  used, and in the case of pcre2_dfa_match() the amount of stack as well. This
  counter also has a default of ten million, which is essentially "unlimited".
  You can change the default by setting, for example,

  --with-match-limit-depth=5000

  There is more discussion in the pcre2api man page (search for
  pcre2_set_depth_limit).

. You can also set an explicit limit on the amount of heap memory used by
  the pcre2_match() and pcre2_dfa_match() interpreters:

  --with-heap-limit=500

  The units are kibibytes (units of 1024 bytes). This limit does not apply when
  the JIT optimization (which has its own memory control features) is used.
  There is more discussion on the pcre2api man page (search for
  pcre2_set_heap_limit).

. In the 8-bit library, the default maximum compiled pattern size is around
  64 kibibytes. You can increase this by adding --with-link-size=3 to the
  "configure" command. PCRE2 then uses three bytes instead of two for offsets
  to different parts of the compiled pattern. In the 16-bit library,
  --with-link-size=3 is the same as --with-link-size=4, which (in both
  libraries) uses four-byte offsets. Increasing the internal link size reduces
  performance in the 8-bit and 16-bit libraries. In the 32-bit library, the
  link size setting is ignored, as 4-byte offsets are always used.

. Lookbehind assertions in which one or more branches can match a variable
  number of characters are supported only if there is a maximum matching length
  for each top-level branch. There is a limit to this maximum that defaults to
  255 characters. You can alter this default by a setting such as

  --with-max-varlookbehind=100

  The limit can be changed at runtime by calling pcre2_set_max_varlookbehind().
  Lookbehind assertions in which every branch matches a fixed number of
  characters (not necessarily all the same) are not constrained by this limit.

. For speed, PCRE2 uses four tables for manipulating and identifying characters
  whose code point values are less than 256. By default, it uses a set of
  tables for ASCII encoding that is part of the distribution. If you specify

  --enable-rebuild-chartables

  a program called pcre2_dftables is compiled and run in the default C locale
  when you obey "make". It builds a source file called pcre2_chartables.c. If
  you do not specify this option, pcre2_chartables.c is created as a copy of
  pcre2_chartables.c.dist. See "Character tables" below for further
  information.

. It is possible to compile PCRE2 for use on systems that use EBCDIC as their
  character code (as opposed to ASCII/Unicode) by specifying

  --enable-ebcdic --disable-unicode

  This automatically implies --enable-rebuild-chartables (see above), in order
  to ensure that you have the correct default character tables for your system's
  codepage. There is an exception when you set --enable-ebcdic-ignoring-compiler
  (see below), which allows using a default set of EBCDIC 1047 character tables
  rather than forcing use of --enable-rebuild-chartables.

  When PCRE2 is built with EBCDIC support, it always operates in EBCDIC. It
  cannot support both EBCDIC and ASCII or UTF-8/16/32.

  There is a second option, --enable-ebcdic-nl25, which specifies that the code
  value for the EBCDIC NL character is 0x25 instead of the default 0x15.

  There is a third option, --enable-ebcdic-ignoring-compiler, which disregards
  the compiler's codepage for determining the numeric value of C character
  constants such as 'z', and instead forces PCRE2 to use numeric constants for
  the EBCDIC 1047 codepage instead.

. If you specify --enable-debug, additional debugging code is included in the
  build. This option is intended for use by the PCRE2 maintainers.

. In environments where valgrind is installed, if you specify

  --enable-valgrind

  PCRE2 will use valgrind annotations to mark certain memory regions as
  unaddressable. This allows it to detect invalid memory accesses, and is
  mostly useful for debugging PCRE2 itself.

. In environments where the gcc compiler is used and lcov is installed, if you
  specify

  --enable-coverage

  the build process implements a code coverage report for the test suite. The
  report is generated by running "make coverage". If ccache is installed on
  your system, it must be disabled when building PCRE2 for coverage reporting.
  You can do this by setting the environment variable CCACHE_DISABLE=1 before
  running "make" to build PCRE2. There is more information about coverage
  reporting in the "pcre2build" documentation.

. When JIT support is enabled, pcre2grep automatically makes use of it, unless
  you add --disable-pcre2grep-jit to the "configure" command.

. There is support for calling external programs during matching in the
  pcre2grep command, using PCRE2's callout facility with string arguments. This
  support can be disabled by adding --disable-pcre2grep-callout to the
  "configure" command. There are two kinds of callout: one that generates
  output from inbuilt code, and another that calls an external program. The
  latter has special support for Windows and VMS; otherwise it assumes the
  existence of the fork() function. This facility can be disabled by adding
  --disable-pcre2grep-callout-fork to the "configure" command.

. The pcre2grep program currently supports only 8-bit data files, and so
  requires the 8-bit PCRE2 library. It is possible to compile pcre2grep to use
  libz and/or libbz2, in order to read .gz and .bz2 files (respectively), by
  specifying one or both of

  --enable-pcre2grep-libz
  --enable-pcre2grep-libbz2

  Of course, the relevant libraries must be installed on your system.

. The default starting size (in bytes) of the internal buffer used by pcre2grep
  can be set by, for example:

  --with-pcre2grep-bufsize=51200

  The value must be a plain integer. The default is 20480. The amount of memory
  used by pcre2grep is actually three times this number, to allow for "before"
  and "after" lines. If very long lines are encountered, the buffer is
  automatically enlarged, up to a fixed maximum size.

. The default maximum size of pcre2grep's internal buffer can be set by, for
  example:

  --with-pcre2grep-max-bufsize=2097152

  The default is either 1048576 or the value of --with-pcre2grep-bufsize,
  whichever is the larger.

. It is possible to compile pcre2test so that it links with the libreadline
  or libedit libraries, by specifying, respectively,

  --enable-pcre2test-libreadline or --enable-pcre2test-libedit

  If this is done, when pcre2test's input is from a terminal, it reads it using
  the readline() function. This provides line-editing and history facilities.
  Note that libreadline is GPL-licensed, so if you distribute a binary of
  pcre2test linked in this way, there may be licensing issues. These can be
  avoided by linking with libedit (which has a BSD licence) instead.

  Enabling libreadline causes the -lreadline option to be added to the
  pcre2test build. In many operating environments with a system-installed
  readline library this is sufficient. However, in some environments (e.g. if
  an unmodified distribution version of readline is in use), it may be
  necessary to specify something like LIBS="-lncurses" as well. This is
  because, to quote the readline INSTALL, "Readline uses the termcap functions,
  but does not link with the termcap or curses library itself, allowing
  applications which link with readline the option to choose an appropriate
  library." If you get error messages about missing functions tgetstr, tgetent,
  tputs, tgetflag, or tgoto, this is the problem, and linking with the ncurses
  library should fix it.

. The C99 standard defines formatting modifiers z and t for size_t and
  ptrdiff_t values, respectively. By default, PCRE2 uses these modifiers in
  environments other than Microsoft Visual Studio versions earlier than 2013
  when __STDC_VERSION__ is defined and has a value greater than or equal to
  199901L (indicating C99). However, there is at least one environment that
  claims to be C99 but does not support these modifiers. If
  --disable-percent-zt is specified, no use is made of the z or t modifiers.
  Instead of %td or %zu, %lu is used, with a cast for size_t values.

. There is a special option called --enable-fuzz-support for use by people who
  want to run fuzzing tests on PCRE2. If set, it causes an extra library
  called libpcre2-fuzzsupport.a to be built, but not installed. This contains
  a single function called LLVMFuzzerTestOneInput() whose arguments are a
  pointer to a string and the length of the string. When called, this function
  tries to compile the string as a pattern, and if that succeeds, to match
  it. This is done both with no options and with some random options bits that
  are generated from the string. Setting --enable-fuzz-support also causes an
  executable called pcre2fuzzcheck-{8,16,32} to be created. This is normally
  run under valgrind or used when PCRE2 is compiled with address sanitizing
  enabled. It calls the fuzzing function and outputs information about what it
  is doing. The input strings are specified by arguments: if an argument
  starts with "=" the rest of it is a literal input string. Otherwise, it is
  assumed to be a file name, and the contents of the file are the test string.

. Releases before 10.30 could be compiled with --disable-stack-for-recursion,
  which caused pcre2_match() to use individual blocks on the heap for
  backtracking instead of recursive function calls (which use the stack). This
  is now obsolete because pcre2_match() was refactored always to use the heap
  (in a much more efficient way than before). This option is retained for
  backwards compatibility, but has no effect other than to output a warning.

The "configure" script builds the following files for the basic C library:

. Makefile             the makefile that builds the library
. src/config.h         build-time configuration options for the library
. src/pcre2.h          the public PCRE2 header file
. pcre2-config         script that shows the building settings such as CFLAGS
                         that were set for "configure"
. libpcre2-8.pc        )
. libpcre2-16.pc       ) data for the pkg-config command
. libpcre2-32.pc       )
. libpcre2-posix.pc    )
. libtool              script that builds shared and/or static libraries

Versions of config.h and pcre2.h are distributed in the src directory of PCRE2
tarballs under the names config.h.generic and pcre2.h.generic. These are
provided for those who have to build PCRE2 without using "configure" or CMake.
If you use "configure" or CMake, the .generic versions are not used.

The "configure" script also creates config.status, which is an executable
script that can be run to recreate the configuration, and config.log, which
contains compiler output from tests that "configure" runs.

Once "configure" has run, you can run "make". This builds whichever of the
libraries libpcre2-8, libpcre2-16 and libpcre2-32 are configured, and a test
program called pcre2test. If you enabled JIT support with --enable-jit, another
test program called pcre2_jit_test is built as well. If the 8-bit library is
built, libpcre2-posix, pcre2posix_test, and the pcre2grep command are also
built. Running "make" with the -j option may speed up compilation on
multiprocessor systems.

The command "make check" runs all the appropriate tests. Details of the PCRE2
tests are given below in a separate section of this document. The -j option of
"make" can also be used when running the tests.

You can use "make install" to install PCRE2 into live directories on your
system. The following are installed (file names are all relative to the
<prefix> that is set when "configure" is run):

  Commands (bin):
    pcre2test
    pcre2grep (if 8-bit support is enabled)
    pcre2-config

  Libraries (lib):
    libpcre2-8      (if 8-bit support is enabled)
    libpcre2-16     (if 16-bit support is enabled)
    libpcre2-32     (if 32-bit support is enabled)
    libpcre2-posix  (if 8-bit support is enabled)

  Configuration information (lib/pkgconfig):
    libpcre2-8.pc
    libpcre2-16.pc
    libpcre2-32.pc
    libpcre2-posix.pc

  Header files (include):
    pcre2.h
    pcre2posix.h

  Man pages (share/man/man{1,3}):
    pcre2grep.1
    pcre2test.1
    pcre2-config.1
    pcre2.3
    pcre2*.3 (lots more pages, all starting "pcre2")

  HTML documentation (share/doc/pcre2/html):
    index.html
    *.html (lots more pages, hyperlinked from index.html)

  Text file documentation (share/doc/pcre2):
    AUTHORS
    COPYING
    ChangeLog
    LICENCE
    NEWS
    README
    SECURITY
    pcre2.txt         (a concatenation of the man(3) pages)
    pcre2test.txt     the pcre2test man page
    pcre2grep.txt     the pcre2grep man page
    pcre2-config.txt  the pcre2-config man page

If you want to remove PCRE2 from your system, you can run "make uninstall".
This removes all the files that "make install" installed. However, it does not
remove any directories, because these are often shared with other programs.


Retrieving configuration information
------------------------------------

Running "make install" installs the command pcre2-config, which can be used to
recall information about the PCRE2 configuration and installation. For example:

  pcre2-config --version

prints the version number, and

  pcre2-config --libs8

outputs information about where the 8-bit library is installed. This command
can be included in makefiles for programs that use PCRE2, saving the programmer
from having to remember too many details. Run pcre2-config with no arguments to
obtain a list of possible arguments.

The pkg-config command is another system for saving and retrieving information
about installed libraries. Instead of separate commands for each library, a
single command is used. For example:

  pkg-config --libs libpcre2-16

The data is held in *.pc files that are installed in a directory called
<prefix>/lib/pkgconfig.


Shared libraries
----------------

The default distribution builds PCRE2 as shared libraries and static libraries,
as long as the operating system supports shared libraries. Shared library
support relies on the "libtool" script which is built as part of the
"configure" process.

The libtool script is used to compile and link both shared and static
libraries. They are placed in a subdirectory called .libs when they are newly
built. The programs pcre2test and pcre2grep are built to use these uninstalled
libraries (by means of wrapper scripts in the case of shared libraries). When
you use "make install" to install shared libraries, pcre2grep and pcre2test are
automatically re-built to use the newly installed shared libraries before being
installed themselves. However, the versions left in the build directory still
use the uninstalled libraries.

To build PCRE2 using static libraries only you must use --disable-shared when
configuring it. For example:

./configure --prefix=/usr/gnu --disable-shared

Then run "make" in the usual way. Similarly, you can use --disable-static to
build only shared libraries. Note, however, that when you build only static
libraries, binary programs such as pcre2test and pcre2grep may still be
dynamically linked with other libraries (for example, libc) unless you set
LDFLAGS to --static when running "configure".


Cross-compiling using autotools
-------------------------------

You can specify CC and CFLAGS in the normal way to the "configure" command, in
order to cross-compile PCRE2 for some other host. However, you should NOT
specify --enable-rebuild-chartables, because if you do, the pcre2_dftables.c
source file is compiled and run on the local host, in order to generate the
inbuilt character tables (the pcre2_chartables.c file). This will probably not
work, because pcre2_dftables.c needs to be compiled with the local compiler,
not the cross compiler.

When --enable-rebuild-chartables is not specified, pcre2_chartables.c is
created by making a copy of pcre2_chartables.c.dist, which is a default set of
tables that assumes ASCII code. Cross-compiling with the default tables should
not be a problem.

If you need to modify the character tables when cross-compiling, you should
move pcre2_chartables.c.dist out of the way, then compile pcre2_dftables.c by
hand and run it on the local host to make a new version of
pcre2_chartables.c.dist. See the pcre2build section "Creating character tables
at build time" for more details.


Making new tarballs
-------------------

The command "make dist" creates three PCRE2 tarballs, in tar.gz, tar.bz2, and
zip formats. The command "make distcheck" does the same, but then does a trial
build of the new distribution to ensure that it works.

If you have modified any of the man page sources in the doc directory, you
should first run the maint/UpdateAlways script before making a distribution.
This script creates the .txt and HTML forms of the documentation from the man
pages.


Testing PCRE2
-------------

To test the basic PCRE2 library on a Unix-like system, run the RunTest script.
There is another script called RunGrepTest that tests the pcre2grep command.
When the 8-bit library is built, a test program for the POSIX wrapper, called
pcre2posix_test, is compiled, and when JIT support is enabled, a test program
called pcre2_jit_test is built. The scripts and the program tests are all run
when you obey "make check". For other environments, see the instructions in
NON-AUTOTOOLS-BUILD.

The RunTest script runs the pcre2test test program (which is documented in its
own man page) on each of the relevant testinput files in the testdata
directory, and compares the output with the contents of the corresponding
testoutput files. RunTest places its output in directories
testoutput{8,16,32}{,-jit,-dfa}. Other files whose names begin with "test" are
used as working files in some tests.

Some tests are relevant only when certain build-time options were selected. For
example, the tests for UTF-8/16/32 features are run only when Unicode support
is available. RunTest outputs a comment when it skips a test.

Many (but not all) of the tests that are not skipped are run twice if JIT
support is available. On the second run, JIT compilation is forced. This
testing can be suppressed by putting "-nojit" on the RunTest command line.

The entire set of tests is run once for each of the 8-bit, 16-bit and 32-bit
libraries that are enabled. If you want to run just one set of tests, call
RunTest with either the -8, -16 or -32 option.

If valgrind is installed, you can run the tests under it by putting "-valgrind"
on the RunTest command line. To run pcre2test on just one or more specific test
files, give their numbers as arguments to RunTest, for example:

  RunTest 2 7 11

You can also specify ranges of tests such as 3-6 or 3- (meaning 3 to the
end), or a number preceded by ~ to exclude a test. For example:

  Runtest 3-15 ~10

This runs tests 3 to 15, excluding test 10, and just ~13 runs all the tests
except test 13. Whatever order the arguments are in, the tests are always run
in numerical order.

You can also call RunTest with the single argument "list" to cause it to output
a list of tests.

The test sequence starts with "test 0", which is a special test that has no
input file, and whose output is not checked. This is because it will be
different on different hardware and with different configurations. The test
exists in order to exercise some of pcre2test's code that would not otherwise
be run.

Tests 1 and 2 can always be run, as they expect only plain text strings (not
UTF) and make no use of Unicode properties. The first test file can be fed
directly into the perltest.sh script to check that Perl gives the same results.
The only difference you should see is in the first few lines, where the Perl
version is given instead of the PCRE2 version. The second set of tests check
auxiliary functions, error detection, and run-time flags that are specific to
PCRE2. It also uses the debugging flags to check some of the internals of
pcre2_compile().

If you build PCRE2 with a locale setting that is not the standard C locale, the
character tables may be different (see next paragraph). In some cases, this may
cause failures in the second set of tests. For example, in a locale where the
isprint() function yields TRUE for characters in the range 128-255, the use of
[:isascii:] inside a character class defines a different set of characters, and
this shows up in this test as a difference in the compiled code, which is being
listed for checking. For example, where the comparison test output contains
[\x00-\x7f] the test might contain [\x00-\xff], and similarly in some other
cases. This is not a bug in PCRE2.

Test 3 checks pcre2_maketables(), the facility for building a set of character
tables for a specific locale and using them instead of the default tables. The
script uses the "locale" command to check for the availability of the "fr_FR",
"french", or "fr" locale, and uses the first one that it finds. If the "locale"
command fails, or if its output doesn't include "fr_FR", "french", or "fr" in
the list of available locales, the third test cannot be run, and a comment is
output to say why. If running this test produces an error like this:

  ** Failed to set locale "fr_FR"

it means that the given locale is not available on your system, despite being
listed by "locale". This does not mean that PCRE2 is broken. There are three
alternative output files for the third test, because three different versions
of the French locale have been encountered. The test passes if its output
matches any one of them.

Tests 4 and 5 check UTF and Unicode property support, test 4 being compatible
with the perltest.sh script, and test 5 checking PCRE2-specific things.

Tests 6 and 7 check the pcre2_dfa_match() alternative matching function, in
non-UTF mode and UTF-mode with Unicode property support, respectively.

Test 8 checks some internal offsets and code size features, but it is run only
when Unicode support is enabled. The output is different in 8-bit, 16-bit, and
32-bit modes and for different link sizes, so there are different output files
for each mode and link size.

Tests 9 and 10 are run only in 8-bit mode, and tests 11 and 12 are run only in
16-bit and 32-bit modes. These are tests that generate different output in
8-bit mode. Each pair are for general cases and Unicode support, respectively.

Test 13 checks the handling of non-UTF characters greater than 255 by
pcre2_dfa_match() in 16-bit and 32-bit modes.

Test 14 contains some special UTF and UCP tests that give different output for
different code unit widths.

Test 15 contains a number of tests that must not be run with JIT. They check,
among other non-JIT things, the match-limiting features of the interpretive
matcher.

Test 16 is run only when JIT support is not available. It checks that an
attempt to use JIT has the expected behaviour.

Test 17 is run only when JIT support is available. It checks JIT complete and
partial modes, match-limiting under JIT, and other JIT-specific features.

Tests 18 and 19 are run only in 8-bit mode. They check the POSIX interface to
the 8-bit library, without and with Unicode support, respectively.

Test 20 checks the serialization functions by writing a set of compiled
patterns to a file, and then reloading and checking them.

Tests 21 and 22 test \C support when the use of \C is not locked out, without
and with UTF support, respectively. Test 23 tests \C when it is locked out.

Tests 24 and 25 test the experimental pattern conversion functions, without and
with UTF support, respectively.

Test 26 checks Unicode property support using tests that were generated
automatically from the Unicode data tables. These are the archived version of
the tests from Unicode 15.

Test 27 checks Unicode property support using tests that are generated
automatically from the currently-used Unicode data tables.

Test 28 tests EBCDIC support, and is only run when PCRE2 is specifically
compiled for EBCDIC. Test 29 tests EBCDIC when NL has been configured to be
0x25.


Character tables
----------------

For speed, PCRE2 uses four tables for manipulating and identifying characters
whose code point values are less than 256. By default, a set of tables that is
built into the library is used. The pcre2_maketables() function can be called
by an application to create a new set of tables in the current locale. This are
passed to PCRE2 by calling pcre2_set_character_tables() to put a pointer into a
compile context.

The source file called pcre2_chartables.c contains the default set of tables.
By default, this is created as a copy of pcre2_chartables.c.dist, which
contains tables for ASCII coding. However, if --enable-rebuild-chartables is
specified for ./configure, a new version of pcre2_chartables.c is built by the
program pcre2_dftables (compiled from pcre2_dftables.c), which uses the ANSI C
character handling functions such as isalnum(), isalpha(), isupper(),
islower(), etc. to build the table sources. This means that the default C
locale that is set for your system will control the contents of these default
tables. You can change the default tables by editing pcre2_chartables.c and
then re-building PCRE2. If you do this, you should take care to ensure that the
file does not get automatically re-generated. The best way to do this is to
move pcre2_chartables.c.dist out of the way and replace it with your customized
tables.

When the pcre2_dftables program is run as a result of specifying
--enable-rebuild-chartables, it uses the default C locale that is set on your
system. It does not pay attention to the LC_xxx environment variables. In other
words, it uses the system's default locale rather than whatever the compiling
user happens to have set. If you really do want to build a source set of
character tables in a locale that is specified by the LC_xxx variables, you can
run the pcre2_dftables program by hand with the -L option. For example:

  ./pcre2_dftables -L pcre2_chartables.c.special

The second argument names the file where the source code for the tables is
written. The first two 256-byte tables provide lower casing and case flipping
functions, respectively. The next table consists of a number of 32-byte bit
maps which identify certain character classes such as digits, "word"
characters, white space, etc. These are used when building 32-byte bit maps
that represent character classes for code points less than 256. The final
256-byte table has bits indicating various character types, as follows:

    1   white space character
    2   letter
    4   lower case letter
    8   decimal digit
   16   alphanumeric or '_'

You can also specify -b (with or without -L) when running pcre2_dftables. This
causes the tables to be written in binary instead of as source code. A set of
binary tables can be loaded into memory by an application and passed to
pcre2_compile() in the same way as tables created dynamically by calling
pcre2_maketables(). The tables are just a string of bytes, independent of
hardware characteristics such as endianness. This means they can be bundled
with an application that runs in different environments, to ensure consistent
behaviour.

See also the pcre2build section "Creating character tables at build time".


File manifest
-------------

The distribution should contain the files listed below.

(A) Source files for the PCRE2 library functions and their headers are found in
    the src directory:

  src/pcre2_dftables.c     auxiliary program for building pcre2_chartables.c
                           when --enable-rebuild-chartables is specified

  src/pcre2_chartables.c.dist  a default set of character tables that assume
                           ASCII coding; unless --enable-rebuild-chartables is
                           specified, used by copying to pcre2_chartables.c
  src/pcre2_chartables.c.ebcdic-1047-{nl15,nl25}  a default set of character
                           tables for EBCDIC 1047; used if
                           --enable-ebcdic-ignoring-compiler is specified
                           without --enable-rebuild-chartables

  src/pcre2posix.c           )
  src/pcre2_auto_possess.c   )
  src/pcre2_chkdint.c        )
  src/pcre2_compile.c        )
  src/pcre2_compile_cgroup.c )
  src/pcre2_compile_class.c  )
  src/pcre2_config.c         )
  src/pcre2_context.c        )
  src/pcre2_convert.c        )
  src/pcre2_dfa_match.c      )
  src/pcre2_error.c          )
  src/pcre2_extuni.c         )
  src/pcre2_find_bracket.c   )
  src/pcre2_jit_compile.c    )
  src/pcre2_maketables.c     ) sources for the functions in the library,
  src/pcre2_match.c          )   and some internal functions that they use
  src/pcre2_match_data.c     )
  src/pcre2_newline.c        )
  src/pcre2_ord2utf.c        )
  src/pcre2_pattern_info.c   )
  src/pcre2_script_run.c     )
  src/pcre2_serialize.c      )
  src/pcre2_string_utils.c   )
  src/pcre2_study.c          )
  src/pcre2_substitute.c     )
  src/pcre2_substring.c      )
  src/pcre2_tables.c         )
  src/pcre2_ucd.c            )
  src/pcre2_valid_utf.c      )
  src/pcre2_xclass.c         )

  src/pcre2_fuzzsupport.c  function for (optional) fuzzing support

  src/config.h.in          template for config.h, when built by "configure"
  src/pcre2.h.in           template for pcre2.h when built by "configure"
  src/pcre2posix.h         header for the external POSIX wrapper API
  src/pcre2_compile.h      header for internal use
  src/pcre2_internal.h     header for internal use
  src/pcre2_intmodedep.h   a mode-specific internal header
  src/pcre2_jit_char_inc.h header used by JIT
  src/pcre2_jit_match_inc.h header used by JIT
  src/pcre2_jit_misc_inc.h header used by JIT
  src/pcre2_jit_neon_inc.h header used by JIT
  src/pcre2_jit_simd_inc.h header used by JIT
  src/pcre2_printint_inc.h debugging function that is used by pcre2test
  src/pcre2_ucp.h          header for Unicode property handling
  src/pcre2_ucptables_inc.h header with Unicode data tables
  src/pcre2_util.h         header for internal utils

  deps/sljit/sljit_src/*   source files for the JIT compiler

(B) Source files for programs that use PCRE2:

  src/pcre2demo.c          simple demonstration of coding calls to PCRE2
  src/pcre2grep.c          source of a grep utility that uses PCRE2
  src/pcre2test.c          comprehensive test program
  src/pcre2_jit_test.c     JIT test program
  src/pcre2posix_test.c    POSIX wrapper API test program

(C) Auxiliary files:

  AUTHORS.md               information about the authors of PCRE2
  ChangeLog                log of changes to the code
  HACKING                  some notes about the internals of PCRE2
  INSTALL                  generic installation instructions
  LICENCE.md               conditions for the use of PCRE2
  COPYING                  the same, using GNU's standard name
  SECURITY.md              information on reporting vulnerabilities
  Makefile.in              ) template for Unix Makefile, which is built by
                           )   "configure"
  Makefile.am              ) the automake input that was used to create
                           )   Makefile.in
  NEWS                     important changes in this release
  NON-AUTOTOOLS-BUILD      notes on building PCRE2 without using autotools
  README                   this file
  RunTest                  a Unix shell script for running tests
  RunGrepTest              a Unix shell script for pcre2grep tests
  RunTest.bat              a Windows batch file for running tests
  RunGrepTest.bat          a Windows batch file for pcre2grep tests
  aclocal.m4               m4 macros (generated by "aclocal")
  m4/*                     m4 macros (used by autoconf)
  configure                a configuring shell script (built by autoconf)
  configure.ac             ) the autoconf input that was used to build
                           )   "configure" and config.h
  doc/*.3                  man page sources for PCRE2
  doc/*.1                  man page sources for pcre2grep and pcre2test
  doc/html/*               HTML documentation
  doc/pcre2.txt            plain text version of the man pages
  doc/pcre2-config.txt     plain text documentation of pcre2-config script
  doc/pcre2grep.txt        plain text documentation of grep utility program
  doc/pcre2test.txt        plain text documentation of test program
  libpcre2-8.pc.in         template for libpcre2-8.pc for pkg-config
  libpcre2-16.pc.in        template for libpcre2-16.pc for pkg-config
  libpcre2-32.pc.in        template for libpcre2-32.pc for pkg-config
  libpcre2-posix.pc.in     template for libpcre2-posix.pc for pkg-config
  ar-lib                   )
  config.guess             )
  config.sub               )
  depcomp                  ) helper tools generated by libtool and
  compile                  )   automake, used internally by ./configure
  install-sh               )
  ltmain.sh                )
  missing                  )
  test-driver              )
  perltest.sh              Script for running a Perl test program
  pcre2-config.in          source of script which retains PCRE2 information
  testdata/testinput*      test data for main library tests
  testdata/testoutput*     expected test results
  testdata/grep*           input and output for pcre2grep tests
  testdata/*               other supporting test files

(D) Auxiliary files for CMake support

  cmake/COPYING-CMAKE-SCRIPTS
  cmake/FindEditline.cmake
  cmake/FindReadline.cmake
  cmake/pcre2-config-version.cmake.in
  cmake/pcre2-config.cmake.in
  src/config-cmake.h.in
  CMakeLists.txt

(E) Auxiliary files for building PCRE2 "by hand"

  src/pcre2.h.generic     ) a version of the public PCRE2 header file
                          )   for use in non-"configure" environments
  src/config.h.generic    ) a version of config.h for use in non-"configure"
                          )   environments

(F) Auxiliary files for building PCRE2 using other build systems

  BUILD.bazel             ) files used by the Bazel
  MODULE.bazel            )   build system
  build.zig               file used by zig's build system

(G) Auxiliary files for building PCRE2 under OpenVMS

  vms/configure.com       )
  vms/openvms_readme.txt  ) These files were contributed by a PCRE2 user.
  vms/pcre2.h_patch       )
  vms/stdint.h            )

==============================
Last updated: 18 December 2024
==============================