New imager

Author: FDelporte

content/prepare/sd-card.md

@@ -6,35 +6,37 @@ weight: 16
 The SD card will hold the operating system. On the Raspberry Pi website, [on the download page, you can
 find the Imager tool](https://www.raspberrypi.org/software/). Select the version for your computer, download, and install it.
 
-![Imager download](/assets/getting-started/setup/download-imager.png)
+![Imager download](/assets/getting-started/setup/website-download.png)
 
 Start the Imager and follow these steps:
 
 1. Put the SD Card in your computer
-1. Click "Choose Device" and select your type of board
-1. Click "Choose OS" > "Raspberry Pi OS (64-bit)" (or 32-bit for an older board)
-1. Click "Choose Storage" and select your SD card
-1. Click "Next" 
-1. In the "Use OS customisation?" screen, click "Edit Settings" 
-1. In "General", fill in a name for your board, login, password, wifi settings, etc.
-1. In "Services", enable SSH with password authentication
-1. In "Options" you can disable telemetry.
-1. Back in the "Use OS customisation?" screen, click "Yes"
-1. Confirm with "Yes" that all data on the SD Card can be overwritten
-1. Wait until "Writing" and "Verifying" are finished
+1. **Device**: Select your type of board, click "Next"
+1. **OS**: Select "Raspberry Pi OS (64-bit)" (or 32-bit for an older board), click "Next"
+1. **Storage**: Select the SD card, click "Next"
+1. **Hostname**: Fill in a name for your board, click "Next"
+1. **Localisation**: Select your city, time zone, and keyboard layout, click "Next"
+1. **User**: Fill in a username and password, click "Next"
+1. **Wi-Fi**: Fill in the name of your Wi-Fi network, and the password, click "Next"
+1. **Remote access**: Enable SSH so you can access the board remotely, click "Next"
+1. **Raspberry Pi Connect**: Enable this if you want to able to access the board via Raspberry Pi Connect, click "Next"
+1. **Writing**: Now you get a short overview of your choices, click "Write"
+1. Confirm you want to erase all data from the SD card. Double check you have put the right SD card in your computer and you selected that one in the **Storage** step. Click "I understand, erase and write".
+1. Wait until the writing is finished...
 1. You can now take the SD Card out of your computer, and put it in the Raspberry Pi
 
 {{< gallery >}}
-{{< figure link="/assets/getting-started/setup/imager-start.png" caption="Imager start screen" caption-position="center" caption-effect="fade" >}}
-{{< figure link="/assets/getting-started/setup/imager-choose-device.png" caption="Selecting the device" caption-position="center" caption-effect="fade" >}}
+{{< figure link="/assets/getting-started/setup/imager-device.png" caption="Selecting the device" caption-position="center" caption-effect="fade" >}}
 {{< figure link="/assets/getting-started/setup/imager-os.png" caption="Selecting the operating system" caption-position="center" caption-effect="fade" >}}
-{{< figure link="/assets/getting-started/setup/imager-sd.png" caption="Selecting the SD card" caption-position="center" caption-effect="fade" >}}
-{{< figure link="/assets/getting-started/setup/imager-customisation-start.png" caption="Customisation start screen" caption-position="center" caption-effect="fade" >}}
-{{< figure link="/assets/getting-started/setup/imager-customisation-general.png" caption="Customisation: General settings" caption-position="center" caption-effect="fade" >}}
-{{< figure link="/assets/getting-started/setup/imager-customisation-services.png" caption="Customisation: Services" caption-position="center" caption-effect="fade" >}}
-{{< figure link="/assets/getting-started/setup/imager-customisation-options.png" caption="Customisation: Options" caption-position="center" caption-effect="fade" >}}
-{{< figure link="/assets/getting-started/setup/imager-writing.png" caption="Writing to the SD card" caption-position="center" caption-effect="fade" >}}
-{{< figure link="/assets/getting-started/setup/imager-verifying.png" caption="Verifying the SD card" caption-position="center" caption-effect="fade" >}}
-{{< figure link="/assets/getting-started/setup/imager-done.png" caption="Imager is finished" caption-position="center" caption-effect="fade" >}}
+{{< figure link="/assets/getting-started/setup/imager-storage.png" caption="Selecting the SD card" caption-position="center" caption-effect="fade" >}}
+{{< figure link="/assets/getting-started/setup/imager-hostname.png" caption="Specify the hostname" caption-position="center" caption-effect="fade" >}}
+{{< figure link="/assets/getting-started/setup/imager-localisation.png" caption="Specify the localization settings" caption-position="center" caption-effect="fade" >}}
+{{< figure link="/assets/getting-started/setup/imager-wifi.png" caption="Specify the Wi-Fi settings" caption-position="center" caption-effect="fade" >}}
+{{< figure link="/assets/getting-started/setup/imager-ssh.png" caption="Enable SSH" caption-position="center" caption-effect="fade" >}}
+{{< figure link="/assets/getting-started/setup/imager-connect.png" caption="Enable Connect if needed" caption-position="center" caption-effect="fade" >}}
+{{< figure link="/assets/getting-started/setup/imager-write-check.png" caption="Double check before writing" caption-position="center" caption-effect="fade" >}}
+{{< figure link="/assets/getting-started/setup/imager-write-confirm.png" caption="Confirm to write" caption-position="center" caption-effect="fade" >}}
+{{< figure link="/assets/getting-started/setup/imager-writing.png" caption="Writing progress" caption-position="center" caption-effect="fade" >}}
+{{< figure link="/assets/getting-started/setup/imager-done.png" caption="Done" caption-position="center" caption-effect="fade" >}}
 {{< /gallery >}}
 {{< load-photoswipe >}}