small stuff

Author: CamDavidsonPilon

user-guide/01-getting-started/01-assembly_guides/06_pioreactor_20ml_v1.1_to_v1.5/02-pioreactor-disassembly.md

@@ -25,12 +25,12 @@ import TabItem from '@theme/TabItem';
 </AssemblyInstructionBlock>
 
 <AssemblyInstructionBlock title="Step 2: Replace the top vial holder
-" images={["user-guide/hardware-assembly/upgrade_kits/remove_old_vial_holder.jpg","user-guide/hardware-assembly/20ml-v15/oring-groove.jpg", "user-guide/hardware-assembly/20ml-v15/oring-in-top.jpg", "user-guide/hardware-assembly/upgrade_kits/attach_new_vial_holder.jpg",]}>
+" images={["user-guide/hardware-assembly/20ml-v15/oring-groove.jpg", "user-guide/hardware-assembly/20ml-v15/oring-in-top.jpg", "user-guide/hardware-assembly/upgrade_kits/remove_old_vial_holder.jpg", "user-guide/hardware-assembly/upgrade_kits/attach_new_vial_holder.jpg",]}>
 
-2. Screw off the existing top vial holder by twisting it counter-clockwise. This old top isn't needed anymore.
-2. The new top v1.5 vial holder has <Highlight color={colors.blue}>a groove within the body</Highlight> where the #024 O-ring sits. Carefully insert the O-ring using your fingers. Make sure to not twist the O-ring.
-3. Run your finger inside the vial holder, pushing the O-ring into place to ensure a snug fit.
-3. Screw on the new v1.5 vial holder.
+1. The new top v1.5 vial holder has <Highlight color={colors.blue}>a groove within the body</Highlight> where the #024 O-ring sits. Carefully insert the O-ring using your fingers. Make sure to not twist the O-ring.
+2. Run your finger inside the vial holder, pushing the O-ring into place to ensure a snug fit.
+3. Screw off the existing top vial holder by twisting it counter-clockwise. This old top isn't needed anymore.
+4. Screw on the new v1.5 vial holder.
 
 </AssemblyInstructionBlock>
 

user-guide/01-getting-started/01-assembly_guides/06_pioreactor_20ml_v1.1_to_v1.5/_category_.yaml

@@ -1,4 +1,4 @@
 collapsed: true
 collapsible: true
-label: "Pioreactor 20ml v1.1 → v1.5"
+label: "Upgrade 20ml v1.1 → v1.5"
 className: sidebar-item--new

user-guide/01-getting-started/01-assembly_guides/07_pioreactor_40ml_v1.0_to_v1.5/02-pioreactor-disassembly.md

@@ -25,12 +25,12 @@ import TabItem from '@theme/TabItem';
 </AssemblyInstructionBlock>
 
 <AssemblyInstructionBlock title="Step 2: Replace the top vial holder
-" images={["user-guide/hardware-assembly/upgrade_kits/remove_old_vial_holder.jpg","user-guide/hardware-assembly/40ml-v15/oring-groove.jpg", "user-guide/hardware-assembly/40ml-v15/oring-in-top.jpg", "user-guide/hardware-assembly/upgrade_kits/attach_new_vial_holder.jpg",]}>
+" images={["user-guide/hardware-assembly/40ml-v15/oring-groove.jpg", "user-guide/hardware-assembly/40ml-v15/oring-in-top.jpg", "user-guide/hardware-assembly/upgrade_kits/remove_old_vial_holder.jpg", "user-guide/hardware-assembly/upgrade_kits/attach_new_vial_holder.jpg",]}>
 
-2. Screw off the existing top vial holder by twisting it counter-clockwise. This old top isn't needed anymore.
-2. The new top v1.5 vial holder has <Highlight color={colors.blue}>a groove within the body</Highlight> where the #024 O-ring sits. Carefully insert the O-ring using your fingers. Make sure to not twist the O-ring.
-3. Run your finger inside the vial holder, pushing the O-ring into place to ensure a snug fit.
-3. Screw on the new v1.5 vial holder.
+1. The new top v1.5 vial holder has <Highlight color={colors.blue}>a groove within the body</Highlight> where the #024 O-ring sits. Carefully insert the O-ring using your fingers. Make sure to not twist the O-ring.
+2. Run your finger inside the vial holder, pushing the O-ring into place to ensure a snug fit.
+3. Screw off the existing top vial holder by twisting it counter-clockwise. This old top isn't needed anymore.
+4. Screw on the new v1.5 vial holder.
 
 </AssemblyInstructionBlock>
 

user-guide/01-getting-started/01-assembly_guides/07_pioreactor_40ml_v1.0_to_v1.5/_category_.yaml

@@ -1,4 +1,4 @@
 collapsed: true
 collapsible: true
-label: "Pioreactor 40ml v1.0 → v1.5"
+label: "Upgrade 40ml v1.0 → v1.5"
 className: sidebar-item--new

user-guide/01-getting-started/01-assembly_guides/98_pioreactor_20ml_v1.0_to_v1.1/_category_.yaml

@@ -1,3 +1,3 @@
 collapsed: true
 collapsible: true
-label: "Pioreactor 20ml v1.0 → v1.1"
+label: "Upgrade 20ml v1.0 → v1.1"