Case/frame for Mesmerizer

[IBMJunkman]

Has anyone done a 3D printed case/frame for the Mesmerizer?

[sixfootdad]

Dave did: https://github.com/PlummersSoftwareLLC/NightDriverStrip/tree/main/3DModel

[IBMJunkman]

OK, refining my question. Anyone doing a 3D case/frame that is selling it? 😀

[rbergen]

Not that I know of. What you could do is use the 3D model @sixfootdad referred to, and have one of the various business that sell 3D printing services (many of them online) print one for you.

[IBMJunkman]

Reconnected with someone that printed me a few parts for my car. He says he can do it. For the cost of a few boxes of ammo. 😊

[IBMJunkman]

Just discovered my library system has 3D printing available. Who knew?

[rbergen]

Sounds like a case of "problem solved" to me. :)

[grustinkerbel]

I just printed that model with a Bambu PS1. It took 2 hours. Let me say the fitment is PERFECT! Like seriously!!! Thanks Dave!!!

[davepl]

You’re welcome! Did you print the back as well? Or just the front stand? Cheers, Dave

…

On Apr 25, 2025, at 9:51 AM, grustinkerbel ***@***.***> wrote: I just printed that model with a Bambu PS1. It took 2 hours. Let me say the fitment is PERFECT! Like seriously!!! Thanks Dave!!! — Reply to this email directly, view it on GitHub <#713 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AA4HCF62FTJD5GFFOETDJKL23JRZRAVCNFSM6AAAAAB3P5KAQCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTEOJUHE2TQMI>. You are receiving this because you are subscribed to this thread.

[grustinkerbel]

I printed the front stand via model P3 LED Frame.stl
If the back is model LEDFrame-1-06_0.15mm_PLA_MK3_4h17m.gcode I sadly could not load the model into the Bambu software. I did not spend much time troublshooting.

[IBMJunkman]

I have the same question. What file is the back? Can we get a picture of the back?

[heidepiek]

This is a picture of the back of the ledframe, i don`t think there is another stl file especialy for the back. The ledmatrix fits the ledframe, and the pcb is mounted on the back of the matrix. I think the gcode is the file that dave used for his printer. A gcode that is made with either cura, orca slicer or you name it!

Harrie :-)

[davepl]

OK, I've checked in the 3D model of the backplate into my fork! It's in davepl/nightdriverstrip/3dmodels

[tjblair1951]

I purchased a Mesmerizer from Ebay in December 2025. I printed both the front and back and discovered that the holes on the back of the display don't line up with the holes in the backplate. Looks like the display I received is slightly different from the one the backplate was designed to fit. Love the Mesmerizer. The front stand fits perfectly.

[davepl]

[heidepiek]

Ahaa, so there is backplate. Had not seen that before. Thanks dave,

[IBMJunkman]

Which printer file is that?

[grustinkerbel]

Which printer file is that?

[IBMJunkman]

Does not show in what I see.

[davepl]

That’s the main fork, you have to look in my fork. It’s an STL file, which you then run through your slicer to produce gcode. - Dave

…

On Apr 25, 2025, at 5:15 PM, IBMJunkman ***@***.***> wrote: Does not show in what I see. IMG_5465.png (view on web) <https://github.com/user-attachments/assets/28d1cb67-5b70-4d5b-8782-0ad7918df02f> — Reply to this email directly, view it on GitHub <#713 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AA4HCF57YZCQPPIH4UWFMV323LF3LAVCNFSM6AAAAAB3P5KAQCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTEOJVGIYTMMI>. You are receiving this because you commented.

[IBMJunkman]

I am not a git person. Don’t understand main vs fork. Can I just get the url?

[IBMJunkman]

Thanks.

[grustinkerbel]

Here ya go mate.

https://github.com/davepl/NightDriverStrip/tree/main/3DModel

[rbergen]

Now also merged into the main tree: https://github.com/PlummersSoftwareLLC/NightDriverStrip/blob/main/3DModel/Hub75BackplateWithNotch.stl.

It's interesting to see that GitHub actually renders it too.

[IBMJunkman]

OK, someone printed the frame and back for me. Used carbon infused SLA. Need to sand the inside of the frame just a wee bit. But the big question is: what screw size is needed for the back? Any chance they are 6-32?

[IBMJunkman]

Found they are M3. A M3*8 works fine.

[IBMJunkman]

Mounted.

[heidepiek]

Nice work mate!

[IBMJunkman]

Only cost me 6 boxes of 9mm ammo. 😀

[grustinkerbel]

I would have done it for x100 rounds of .38 :special :)

…

On Tue, May 6, 2025 at 4:21 PM IBMJunkman ***@***.***> wrote: Only cost me 6 boxes of 9mm ammo. 😀 — Reply to this email directly, view it on GitHub <#713 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AIIW7WIOZYQT4BWGPUTBBMD25EKV3AVCNFSM6AAAAAB3P5KAQCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTGMBVGQ2TMOI> . You are receiving this because you commented.Message ID: <PlummersSoftwareLLC/NightDriverStrip/repo-discussions/713/comments/13054569 @github.com>

[IBMJunkman]

Sorry, don't shoot .38. How about some 500 Magnum? 2 rounds. 😀

[grustinkerbel]

Yes. I pre drilled small holes and used some self tapping screws. Other than that it fit great.

…

On Mon, Dec 29, 2025 at 11:45 AM tjblair1951 ***@***.***> wrote: I purchased a Mesmerizer from Ebay in December 2025. I printed both the front and back and discovered that the holes on the back of the display don't line up with the holes in the backplate. Looks like the display I received is slightly different from the one the backplate was designed to fit. Love the Mesmerizer. The front stand fits perfectly. — Reply to this email directly, view it on GitHub <#713 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AIIW7WNDY2LJNK2R3RFLKFL4EFLBNAVCNFSM6AAAAAB3P5KAQCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTKMZWHAZDCNI> . You are receiving this because you commented.Message ID: <PlummersSoftwareLLC/NightDriverStrip/repo-discussions/713/comments/15368215 @github.com>