RF1.37 do not build #22
Description
Hello!
Rf1.37 Do not build with arduino 1.6.12 But it does with arduino 1.0.6
Here is the build log from 1.6.12
Arduino: 1.6.12 (FreeBSD), Board: "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"
/usr/local/arduino/arduino-builder -dump-prefs -logger=machine -hardware /usr/local/arduino/hardware -tools /usr/local/arduino/tools-builder -built-in-libraries /usr/local/arduino/libraries -libraries /usr/home/bernt/sketchbook/libraries -fqbn=arduino:avr:mega:cpu=atmega2560 -ide-version=10612 -build-path /tmp/arduino_build_147243 -warnings=all -prefs=build.warn_data_percentage=75 -verbose /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino
/usr/local/arduino/arduino-builder -compile -logger=machine -hardware /usr/local/arduino/hardware -tools /usr/local/arduino/tools-builder -built-in-libraries /usr/local/arduino/libraries -libraries /usr/home/bernt/sketchbook/libraries -fqbn=arduino:avr:mega:cpu=atmega2560 -ide-version=10612 -build-path /tmp/arduino_build_147243 -warnings=all -prefs=build.warn_data_percentage=75 -verbose /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino
Using board 'mega' from platform in folder: /usr/local/arduino/hardware/arduino/avr
Using core 'arduino' from platform in folder: /usr/local/arduino/hardware/arduino/avr
Detecting libraries used...
"/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "/tmp/arduino_build_147243/sketch/Repetier.ino.cpp" -o "/dev/null"
"/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "/tmp/arduino_build_147243/sketch/Repetier.ino.cpp" -o "/dev/null"
"/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/tmp/arduino_build_147243/sketch/Repetier.ino.cpp" -o "/dev/null"
"/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/tmp/arduino_build_147243/sketch/Commands.cpp" -o "/dev/null"
"/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/tmp/arduino_build_147243/sketch/Communication.cpp" -o "/dev/null"
"/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/tmp/arduino_build_147243/sketch/Eeprom.cpp" -o "/dev/null"
"/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/tmp/arduino_build_147243/sketch/Extruder.cpp" -o "/dev/null"
"/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/tmp/arduino_build_147243/sketch/HAL.cpp" -o "/dev/null"
"/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/tmp/arduino_build_147243/sketch/Printer.cpp" -o "/dev/null"
"/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/tmp/arduino_build_147243/sketch/RF.cpp" -o "/dev/null"
"/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/tmp/arduino_build_147243/sketch/SDCard.cpp" -o "/dev/null"
"/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/tmp/arduino_build_147243/sketch/SdFat.cpp" -o "/dev/null"
"/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/tmp/arduino_build_147243/sketch/gcode.cpp" -o "/dev/null"
"/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/tmp/arduino_build_147243/sketch/motion.cpp" -o "/dev/null"
"/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/tmp/arduino_build_147243/sketch/ui.cpp" -o "/dev/null"
"/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src/SPI.cpp" -o "/dev/null"
"/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src/Wire.cpp" -o "/dev/null"
"/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src/utility/twi.c" -o "/dev/null"
Generating function prototypes...
"/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/tmp/arduino_build_147243/sketch/Repetier.ino.cpp" -o "/tmp/arduino_build_147243/preproc/ctags_target_for_gcc_minus_e.cpp"
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:114:27: fel: att sätta ihop "/* PINB.3, 22, MISO*/" och "_DDR" ger inte en giltigt preprocessorsymbol
#define MISO_PIN 50 // PINB.3, 22, MISO
^
/tmp/arduino_build_147243/sketch/fastio.h:49:38: anm: i definitionen av makrot "_SET_INPUT"
#define _SET_INPUT(IO) do {DIO ## IO ## _DDR &= ~MASK(DIO ## IO ## _PIN); } while (0)
^
/tmp/arduino_build_147243/sketch/HAL.h:643:9: anm: i expansionen av makrot "SET_INPUT"
SET_INPUT(MISO_PIN);
^
/tmp/arduino_build_147243/sketch/HAL.h:643:19: anm: i expansionen av makrot "MISO_PIN"
SET_INPUT(MISO_PIN);
^
/tmp/arduino_build_147243/sketch/pins.h:114:27: fel: att sätta ihop "/* PINB.3, 22, MISO*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define MISO_PIN 50 // PINB.3, 22, MISO
^
/tmp/arduino_build_147243/sketch/fastio.h:49:65: anm: i definitionen av makrot "_SET_INPUT"
#define _SET_INPUT(IO) do {DIO ## IO ## _DDR &= ~MASK(DIO ## IO ## _PIN); } while (0)
^
/tmp/arduino_build_147243/sketch/HAL.h:643:9: anm: i expansionen av makrot "SET_INPUT"
SET_INPUT(MISO_PIN);
^
/tmp/arduino_build_147243/sketch/HAL.h:643:19: anm: i expansionen av makrot "MISO_PIN"
SET_INPUT(MISO_PIN);
^
/tmp/arduino_build_147243/sketch/pins.h:115:27: fel: att sätta ihop "/* PINB.2, 21, MOSI*/" och "_DDR" ger inte en giltigt preprocessorsymbol
#define MOSI_PIN 51 // PINB.2, 21, MOSI
^
/tmp/arduino_build_147243/sketch/fastio.h:52:39: anm: i definitionen av makrot "_SET_OUTPUT"
#define _SET_OUTPUT(IO) do {DIO ## IO ## _DDR |= MASK(DIO ## IO ## _PIN); } while (0)
^
/tmp/arduino_build_147243/sketch/HAL.h:644:9: anm: i expansionen av makrot "SET_OUTPUT"
SET_OUTPUT(MOSI_PIN);
^
/tmp/arduino_build_147243/sketch/HAL.h:644:20: anm: i expansionen av makrot "MOSI_PIN"
SET_OUTPUT(MOSI_PIN);
^
/tmp/arduino_build_147243/sketch/pins.h:115:27: fel: att sätta ihop "/* PINB.2, 21, MOSI*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define MOSI_PIN 51 // PINB.2, 21, MOSI
^
/tmp/arduino_build_147243/sketch/fastio.h:52:66: anm: i definitionen av makrot "_SET_OUTPUT"
#define _SET_OUTPUT(IO) do {DIO ## IO ## _DDR |= MASK(DIO ## IO ## _PIN); } while (0)
^
/tmp/arduino_build_147243/sketch/HAL.h:644:9: anm: i expansionen av makrot "SET_OUTPUT"
SET_OUTPUT(MOSI_PIN);
^
/tmp/arduino_build_147243/sketch/HAL.h:644:20: anm: i expansionen av makrot "MOSI_PIN"
SET_OUTPUT(MOSI_PIN);
^
/tmp/arduino_build_147243/sketch/pins.h:113:27: fel: att sätta ihop "/* PINB.1, 20, SCK*/" och "_DDR" ger inte en giltigt preprocessorsymbol
#define SCK_PIN 52 // PINB.1, 20, SCK
^
/tmp/arduino_build_147243/sketch/fastio.h:52:39: anm: i definitionen av makrot "_SET_OUTPUT"
#define _SET_OUTPUT(IO) do {DIO ## IO ## _DDR |= MASK(DIO ## IO ## _PIN); } while (0)
^
/tmp/arduino_build_147243/sketch/HAL.h:645:9: anm: i expansionen av makrot "SET_OUTPUT"
SET_OUTPUT(SCK_PIN);
^
/tmp/arduino_build_147243/sketch/HAL.h:645:20: anm: i expansionen av makrot "SCK_PIN"
SET_OUTPUT(SCK_PIN);
^
/tmp/arduino_build_147243/sketch/pins.h:113:27: fel: att sätta ihop "/* PINB.1, 20, SCK*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define SCK_PIN 52 // PINB.1, 20, SCK
^
/tmp/arduino_build_147243/sketch/fastio.h:52:66: anm: i definitionen av makrot "_SET_OUTPUT"
#define _SET_OUTPUT(IO) do {DIO ## IO ## _DDR |= MASK(DIO ## IO ## _PIN); } while (0)
^
/tmp/arduino_build_147243/sketch/HAL.h:645:9: anm: i expansionen av makrot "SET_OUTPUT"
SET_OUTPUT(SCK_PIN);
^
/tmp/arduino_build_147243/sketch/HAL.h:645:20: anm: i expansionen av makrot "SCK_PIN"
SET_OUTPUT(SCK_PIN);
^
/tmp/arduino_build_147243/sketch/pins.h:82:24: fel: att sätta ihop "/* PINB.0, 19, SS*/" och "_DDR" ger inte en giltigt preprocessorsymbol
#define SDSS 53 // PINB.0, 19, SS
^
/tmp/arduino_build_147243/sketch/fastio.h:52:39: anm: i definitionen av makrot "_SET_OUTPUT"
#define _SET_OUTPUT(IO) do {DIO ## IO ## _DDR |= MASK(DIO ## IO ## _PIN); } while (0)
^
/tmp/arduino_build_147243/sketch/HAL.h:648:9: anm: i expansionen av makrot "SET_OUTPUT"
SET_OUTPUT(SDSS);
^
/tmp/arduino_build_147243/sketch/HAL.h:648:20: anm: i expansionen av makrot "SDSS"
SET_OUTPUT(SDSS);
^
/tmp/arduino_build_147243/sketch/pins.h:82:24: fel: att sätta ihop "/* PINB.0, 19, SS*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define SDSS 53 // PINB.0, 19, SS
^
/tmp/arduino_build_147243/sketch/fastio.h:52:66: anm: i definitionen av makrot "_SET_OUTPUT"
#define _SET_OUTPUT(IO) do {DIO ## IO ## _DDR |= MASK(DIO ## IO ## _PIN); } while (0)
^
/tmp/arduino_build_147243/sketch/HAL.h:648:9: anm: i expansionen av makrot "SET_OUTPUT"
SET_OUTPUT(SDSS);
^
/tmp/arduino_build_147243/sketch/HAL.h:648:20: anm: i expansionen av makrot "SDSS"
SET_OUTPUT(SDSS);
^
/tmp/arduino_build_147243/sketch/pins.h:115:27: fel: att sätta ihop "/* PINB.2, 21, MOSI*/" och "_DDR" ger inte en giltigt preprocessorsymbol
#define MOSI_PIN 51 // PINB.2, 21, MOSI
^
/tmp/arduino_build_147243/sketch/fastio.h:52:39: anm: i definitionen av makrot "_SET_OUTPUT"
#define _SET_OUTPUT(IO) do {DIO ## IO ## _DDR |= MASK(DIO ## IO ## _PIN); } while (0)
^
/tmp/arduino_build_147243/sketch/HAL.h:668:9: anm: i expansionen av makrot "SET_OUTPUT"
SET_OUTPUT(MOSI_PIN);
^
/tmp/arduino_build_147243/sketch/HAL.h:668:20: anm: i expansionen av makrot "MOSI_PIN"
SET_OUTPUT(MOSI_PIN);
^
/tmp/arduino_build_147243/sketch/pins.h:115:27: fel: att sätta ihop "/* PINB.2, 21, MOSI*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define MOSI_PIN 51 // PINB.2, 21, MOSI
^
/tmp/arduino_build_147243/sketch/fastio.h:52:66: anm: i definitionen av makrot "_SET_OUTPUT"
#define _SET_OUTPUT(IO) do {DIO ## IO ## _DDR |= MASK(DIO ## IO ## _PIN); } while (0)
^
/tmp/arduino_build_147243/sketch/HAL.h:668:9: anm: i expansionen av makrot "SET_OUTPUT"
SET_OUTPUT(MOSI_PIN);
^
/tmp/arduino_build_147243/sketch/HAL.h:668:20: anm: i expansionen av makrot "MOSI_PIN"
SET_OUTPUT(MOSI_PIN);
^
/tmp/arduino_build_147243/sketch/pins.h:114:27: fel: att sätta ihop "/* PINB.3, 22, MISO*/" och "_DDR" ger inte en giltigt preprocessorsymbol
#define MISO_PIN 50 // PINB.3, 22, MISO
^
/tmp/arduino_build_147243/sketch/fastio.h:49:38: anm: i definitionen av makrot "_SET_INPUT"
#define _SET_INPUT(IO) do {DIO ## IO ## _DDR &= ~MASK(DIO ## IO ## _PIN); } while (0)
^
/tmp/arduino_build_147243/sketch/HAL.h:669:9: anm: i expansionen av makrot "SET_INPUT"
SET_INPUT(MISO_PIN);
^
/tmp/arduino_build_147243/sketch/HAL.h:669:19: anm: i expansionen av makrot "MISO_PIN"
SET_INPUT(MISO_PIN);
^
/tmp/arduino_build_147243/sketch/pins.h:114:27: fel: att sätta ihop "/* PINB.3, 22, MISO*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define MISO_PIN 50 // PINB.3, 22, MISO
^
/tmp/arduino_build_147243/sketch/fastio.h:49:65: anm: i definitionen av makrot "_SET_INPUT"
#define _SET_INPUT(IO) do {DIO ## IO ## _DDR &= ~MASK(DIO ## IO ## _PIN); } while (0)
^
/tmp/arduino_build_147243/sketch/HAL.h:669:9: anm: i expansionen av makrot "SET_INPUT"
SET_INPUT(MISO_PIN);
^
/tmp/arduino_build_147243/sketch/HAL.h:669:19: anm: i expansionen av makrot "MISO_PIN"
SET_INPUT(MISO_PIN);
^
/tmp/arduino_build_147243/sketch/pins.h:92:30: fel: att sätta ihop "/* PINC.0*/" och "_DDR" ger inte en giltigt preprocessorsymbol
#define WATCHDOG_PIN 37 // PINC.0
^
/tmp/arduino_build_147243/sketch/fastio.h:52:39: anm: i definitionen av makrot "_SET_OUTPUT"
#define _SET_OUTPUT(IO) do {DIO ## IO ## _DDR |= MASK(DIO ## IO ## _PIN); } while (0)
^
/tmp/arduino_build_147243/sketch/HAL.h:761:3: anm: i expansionen av makrot "SET_OUTPUT"
SET_OUTPUT(WATCHDOG_PIN);
^
/tmp/arduino_build_147243/sketch/HAL.h:761:14: anm: i expansionen av makrot "WATCHDOG_PIN"
SET_OUTPUT(WATCHDOG_PIN);
^
/tmp/arduino_build_147243/sketch/pins.h:92:30: fel: att sätta ihop "/* PINC.0*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define WATCHDOG_PIN 37 // PINC.0
^
/tmp/arduino_build_147243/sketch/fastio.h:52:66: anm: i definitionen av makrot "_SET_OUTPUT"
#define _SET_OUTPUT(IO) do {DIO ## IO ## _DDR |= MASK(DIO ## IO ## _PIN); } while (0)
^
/tmp/arduino_build_147243/sketch/HAL.h:761:3: anm: i expansionen av makrot "SET_OUTPUT"
SET_OUTPUT(WATCHDOG_PIN);
^
/tmp/arduino_build_147243/sketch/HAL.h:761:14: anm: i expansionen av makrot "WATCHDOG_PIN"
SET_OUTPUT(WATCHDOG_PIN);
^
/tmp/arduino_build_147243/sketch/pins.h:92:30: fel: att sätta ihop "/* PINC.0*/" och "_DDR" ger inte en giltigt preprocessorsymbol
#define WATCHDOG_PIN 37 // PINC.0
^
/tmp/arduino_build_147243/sketch/fastio.h:49:38: anm: i definitionen av makrot "_SET_INPUT"
#define _SET_INPUT(IO) do {DIO ## IO ## _DDR &= ~MASK(DIO ## IO ## _PIN); } while (0)
^
/tmp/arduino_build_147243/sketch/HAL.h:778:3: anm: i expansionen av makrot "SET_INPUT"
SET_INPUT(WATCHDOG_PIN);
^
/tmp/arduino_build_147243/sketch/HAL.h:778:13: anm: i expansionen av makrot "WATCHDOG_PIN"
SET_INPUT(WATCHDOG_PIN);
^
/tmp/arduino_build_147243/sketch/pins.h:92:30: fel: att sätta ihop "/* PINC.0*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define WATCHDOG_PIN 37 // PINC.0
^
/tmp/arduino_build_147243/sketch/fastio.h:49:65: anm: i definitionen av makrot "_SET_INPUT"
#define _SET_INPUT(IO) do {DIO ## IO ## _DDR &= ~MASK(DIO ## IO ## _PIN); } while (0)
^
/tmp/arduino_build_147243/sketch/HAL.h:778:3: anm: i expansionen av makrot "SET_INPUT"
SET_INPUT(WATCHDOG_PIN);
^
/tmp/arduino_build_147243/sketch/HAL.h:778:13: anm: i expansionen av makrot "WATCHDOG_PIN"
SET_INPUT(WATCHDOG_PIN);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:92:30: fel: att sätta ihop "/* PINC.0*/" och "_RPORT" ger inte en giltigt preprocessorsymbol
#define WATCHDOG_PIN 37 // PINC.0
^
/tmp/arduino_build_147243/sketch/fastio.h:40:37: anm: i definitionen av makrot "_READ"
#define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
^
/tmp/arduino_build_147243/sketch/HAL.h:796:22: anm: i expansionen av makrot "READ"
WRITE(WATCHDOG_PIN,READ(WATCHDOG_PIN) ? 0 : 1);
^
/tmp/arduino_build_147243/sketch/HAL.h:796:27: anm: i expansionen av makrot "WATCHDOG_PIN"
WRITE(WATCHDOG_PIN,READ(WATCHDOG_PIN) ? 0 : 1);
^
/tmp/arduino_build_147243/sketch/pins.h:92:30: fel: att sätta ihop "/* PINC.0*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define WATCHDOG_PIN 37 // PINC.0
^
/tmp/arduino_build_147243/sketch/fastio.h:40:64: anm: i definitionen av makrot "_READ"
#define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
^
/tmp/arduino_build_147243/sketch/HAL.h:796:22: anm: i expansionen av makrot "READ"
WRITE(WATCHDOG_PIN,READ(WATCHDOG_PIN) ? 0 : 1);
^
/tmp/arduino_build_147243/sketch/HAL.h:796:27: anm: i expansionen av makrot "WATCHDOG_PIN"
WRITE(WATCHDOG_PIN,READ(WATCHDOG_PIN) ? 0 : 1);
^
/tmp/arduino_build_147243/sketch/pins.h:92:30: fel: att sätta ihop "/* PINC.0*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define WATCHDOG_PIN 37 // PINC.0
^
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/HAL.h:796:3: anm: i expansionen av makrot "WRITE"
WRITE(WATCHDOG_PIN,READ(WATCHDOG_PIN) ? 0 : 1);
^
/tmp/arduino_build_147243/sketch/HAL.h:796:9: anm: i expansionen av makrot "WATCHDOG_PIN"
WRITE(WATCHDOG_PIN,READ(WATCHDOG_PIN) ? 0 : 1);
^
/tmp/arduino_build_147243/sketch/pins.h:92:30: fel: att sätta ihop "/* PINC.0*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define WATCHDOG_PIN 37 // PINC.0
^
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/HAL.h:796:3: anm: i expansionen av makrot "WRITE"
WRITE(WATCHDOG_PIN,READ(WATCHDOG_PIN) ? 0 : 1);
^
/tmp/arduino_build_147243/sketch/HAL.h:796:9: anm: i expansionen av makrot "WATCHDOG_PIN"
WRITE(WATCHDOG_PIN,READ(WATCHDOG_PIN) ? 0 : 1);
^
/tmp/arduino_build_147243/sketch/pins.h:92:30: fel: att sätta ihop "/* PINC.0*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define WATCHDOG_PIN 37 // PINC.0
^
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/HAL.h:796:3: anm: i expansionen av makrot "WRITE"
WRITE(WATCHDOG_PIN,READ(WATCHDOG_PIN) ? 0 : 1);
^
/tmp/arduino_build_147243/sketch/HAL.h:796:9: anm: i expansionen av makrot "WATCHDOG_PIN"
WRITE(WATCHDOG_PIN,READ(WATCHDOG_PIN) ? 0 : 1);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:92:30: fel: att sätta ihop "/* PINC.0*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define WATCHDOG_PIN 37 // PINC.0
^
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/HAL.h:796:3: anm: i expansionen av makrot "WRITE"
WRITE(WATCHDOG_PIN,READ(WATCHDOG_PIN) ? 0 : 1);
^
/tmp/arduino_build_147243/sketch/HAL.h:796:9: anm: i expansionen av makrot "WATCHDOG_PIN"
WRITE(WATCHDOG_PIN,READ(WATCHDOG_PIN) ? 0 : 1);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:67:36: fel: att sätta ihop "/* PINA.4, 74, STP_DRV4*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_E0_STEP_PIN 26 // PINA.4, 74, STP_DRV4
^
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Extruder.h:140:9: anm: i expansionen av makrot "WRITE"
WRITE(EXT0_STEP_PIN,HIGH);
^
/tmp/arduino_build_147243/sketch/pins.h:375:24: anm: i expansionen av makrot "ORIG_E0_STEP_PIN"
#define E0_STEP_PIN ORIG_E0_STEP_PIN
^
/tmp/arduino_build_147243/sketch/RF1000.h:244:28: anm: i expansionen av makrot "E0_STEP_PIN"
#define EXT0_STEP_PIN E0_STEP_PIN
^
/tmp/arduino_build_147243/sketch/Extruder.h:140:15: anm: i expansionen av makrot "EXT0_STEP_PIN"
WRITE(EXT0_STEP_PIN,HIGH);
^
/tmp/arduino_build_147243/sketch/pins.h:67:36: fel: att sätta ihop "/* PINA.4, 74, STP_DRV4*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_E0_STEP_PIN 26 // PINA.4, 74, STP_DRV4
^
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Extruder.h:140:9: anm: i expansionen av makrot "WRITE"
WRITE(EXT0_STEP_PIN,HIGH);
^
/tmp/arduino_build_147243/sketch/pins.h:375:24: anm: i expansionen av makrot "ORIG_E0_STEP_PIN"
#define E0_STEP_PIN ORIG_E0_STEP_PIN
^
/tmp/arduino_build_147243/sketch/RF1000.h:244:28: anm: i expansionen av makrot "E0_STEP_PIN"
#define EXT0_STEP_PIN E0_STEP_PIN
^
/tmp/arduino_build_147243/sketch/Extruder.h:140:15: anm: i expansionen av makrot "EXT0_STEP_PIN"
WRITE(EXT0_STEP_PIN,HIGH);
^
/tmp/arduino_build_147243/sketch/pins.h:67:36: fel: att sätta ihop "/* PINA.4, 74, STP_DRV4*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_E0_STEP_PIN 26 // PINA.4, 74, STP_DRV4
^
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Extruder.h:140:9: anm: i expansionen av makrot "WRITE"
WRITE(EXT0_STEP_PIN,HIGH);
^
/tmp/arduino_build_147243/sketch/pins.h:375:24: anm: i expansionen av makrot "ORIG_E0_STEP_PIN"
#define E0_STEP_PIN ORIG_E0_STEP_PIN
^
/tmp/arduino_build_147243/sketch/RF1000.h:244:28: anm: i expansionen av makrot "E0_STEP_PIN"
#define EXT0_STEP_PIN E0_STEP_PIN
^
/tmp/arduino_build_147243/sketch/Extruder.h:140:15: anm: i expansionen av makrot "EXT0_STEP_PIN"
WRITE(EXT0_STEP_PIN,HIGH);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:67:36: fel: att sätta ihop "/* PINA.4, 74, STP_DRV4*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_E0_STEP_PIN 26 // PINA.4, 74, STP_DRV4
^
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Extruder.h:140:9: anm: i expansionen av makrot "WRITE"
WRITE(EXT0_STEP_PIN,HIGH);
^
/tmp/arduino_build_147243/sketch/pins.h:375:24: anm: i expansionen av makrot "ORIG_E0_STEP_PIN"
#define E0_STEP_PIN ORIG_E0_STEP_PIN
^
/tmp/arduino_build_147243/sketch/RF1000.h:244:28: anm: i expansionen av makrot "E0_STEP_PIN"
#define EXT0_STEP_PIN E0_STEP_PIN
^
/tmp/arduino_build_147243/sketch/Extruder.h:140:15: anm: i expansionen av makrot "EXT0_STEP_PIN"
WRITE(EXT0_STEP_PIN,HIGH);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:67:36: fel: att sätta ihop "/* PINA.4, 74, STP_DRV4*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_E0_STEP_PIN 26 // PINA.4, 74, STP_DRV4
^
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Extruder.h:208:9: anm: i expansionen av makrot "WRITE"
WRITE(EXT0_STEP_PIN,LOW);
^
/tmp/arduino_build_147243/sketch/pins.h:375:24: anm: i expansionen av makrot "ORIG_E0_STEP_PIN"
#define E0_STEP_PIN ORIG_E0_STEP_PIN
^
/tmp/arduino_build_147243/sketch/RF1000.h:244:28: anm: i expansionen av makrot "E0_STEP_PIN"
#define EXT0_STEP_PIN E0_STEP_PIN
^
/tmp/arduino_build_147243/sketch/Extruder.h:208:15: anm: i expansionen av makrot "EXT0_STEP_PIN"
WRITE(EXT0_STEP_PIN,LOW);
^
/tmp/arduino_build_147243/sketch/pins.h:67:36: fel: att sätta ihop "/* PINA.4, 74, STP_DRV4*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_E0_STEP_PIN 26 // PINA.4, 74, STP_DRV4
^
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Extruder.h:208:9: anm: i expansionen av makrot "WRITE"
WRITE(EXT0_STEP_PIN,LOW);
^
/tmp/arduino_build_147243/sketch/pins.h:375:24: anm: i expansionen av makrot "ORIG_E0_STEP_PIN"
#define E0_STEP_PIN ORIG_E0_STEP_PIN
^
/tmp/arduino_build_147243/sketch/RF1000.h:244:28: anm: i expansionen av makrot "E0_STEP_PIN"
#define EXT0_STEP_PIN E0_STEP_PIN
^
/tmp/arduino_build_147243/sketch/Extruder.h:208:15: anm: i expansionen av makrot "EXT0_STEP_PIN"
WRITE(EXT0_STEP_PIN,LOW);
^
/tmp/arduino_build_147243/sketch/pins.h:67:36: fel: att sätta ihop "/* PINA.4, 74, STP_DRV4*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_E0_STEP_PIN 26 // PINA.4, 74, STP_DRV4
^
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Extruder.h:208:9: anm: i expansionen av makrot "WRITE"
WRITE(EXT0_STEP_PIN,LOW);
^
/tmp/arduino_build_147243/sketch/pins.h:375:24: anm: i expansionen av makrot "ORIG_E0_STEP_PIN"
#define E0_STEP_PIN ORIG_E0_STEP_PIN
^
/tmp/arduino_build_147243/sketch/RF1000.h:244:28: anm: i expansionen av makrot "E0_STEP_PIN"
#define EXT0_STEP_PIN E0_STEP_PIN
^
/tmp/arduino_build_147243/sketch/Extruder.h:208:15: anm: i expansionen av makrot "EXT0_STEP_PIN"
WRITE(EXT0_STEP_PIN,LOW);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:67:36: fel: att sätta ihop "/* PINA.4, 74, STP_DRV4*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_E0_STEP_PIN 26 // PINA.4, 74, STP_DRV4
^
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Extruder.h:208:9: anm: i expansionen av makrot "WRITE"
WRITE(EXT0_STEP_PIN,LOW);
^
/tmp/arduino_build_147243/sketch/pins.h:375:24: anm: i expansionen av makrot "ORIG_E0_STEP_PIN"
#define E0_STEP_PIN ORIG_E0_STEP_PIN
^
/tmp/arduino_build_147243/sketch/RF1000.h:244:28: anm: i expansionen av makrot "E0_STEP_PIN"
#define EXT0_STEP_PIN E0_STEP_PIN
^
/tmp/arduino_build_147243/sketch/Extruder.h:208:15: anm: i expansionen av makrot "EXT0_STEP_PIN"
WRITE(EXT0_STEP_PIN,LOW);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:68:36: fel: att sätta ihop "/* PINA.6, 72, DIR_DRV4*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_E0_DIR_PIN 28 // PINA.6, 72, DIR_DRV4
^
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Extruder.h:280:17: anm: i expansionen av makrot "WRITE"
WRITE(EXT0_DIR_PIN,!EXT0_INVERSE);
^
/tmp/arduino_build_147243/sketch/pins.h:376:23: anm: i expansionen av makrot "ORIG_E0_DIR_PIN"
#define E0_DIR_PIN ORIG_E0_DIR_PIN
^
/tmp/arduino_build_147243/sketch/RF1000.h:245:27: anm: i expansionen av makrot "E0_DIR_PIN"
#define EXT0_DIR_PIN E0_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Extruder.h:280:23: anm: i expansionen av makrot "EXT0_DIR_PIN"
WRITE(EXT0_DIR_PIN,!EXT0_INVERSE);
^
/tmp/arduino_build_147243/sketch/pins.h:68:36: fel: att sätta ihop "/* PINA.6, 72, DIR_DRV4*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_E0_DIR_PIN 28 // PINA.6, 72, DIR_DRV4
^
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Extruder.h:280:17: anm: i expansionen av makrot "WRITE"
WRITE(EXT0_DIR_PIN,!EXT0_INVERSE);
^
/tmp/arduino_build_147243/sketch/pins.h:376:23: anm: i expansionen av makrot "ORIG_E0_DIR_PIN"
#define E0_DIR_PIN ORIG_E0_DIR_PIN
^
/tmp/arduino_build_147243/sketch/RF1000.h:245:27: anm: i expansionen av makrot "E0_DIR_PIN"
#define EXT0_DIR_PIN E0_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Extruder.h:280:23: anm: i expansionen av makrot "EXT0_DIR_PIN"
WRITE(EXT0_DIR_PIN,!EXT0_INVERSE);
^
/tmp/arduino_build_147243/sketch/pins.h:68:36: fel: att sätta ihop "/* PINA.6, 72, DIR_DRV4*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_E0_DIR_PIN 28 // PINA.6, 72, DIR_DRV4
^
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Extruder.h:280:17: anm: i expansionen av makrot "WRITE"
WRITE(EXT0_DIR_PIN,!EXT0_INVERSE);
^
/tmp/arduino_build_147243/sketch/pins.h:376:23: anm: i expansionen av makrot "ORIG_E0_DIR_PIN"
#define E0_DIR_PIN ORIG_E0_DIR_PIN
^
/tmp/arduino_build_147243/sketch/RF1000.h:245:27: anm: i expansionen av makrot "E0_DIR_PIN"
#define EXT0_DIR_PIN E0_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Extruder.h:280:23: anm: i expansionen av makrot "EXT0_DIR_PIN"
WRITE(EXT0_DIR_PIN,!EXT0_INVERSE);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:68:36: fel: att sätta ihop "/* PINA.6, 72, DIR_DRV4*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_E0_DIR_PIN 28 // PINA.6, 72, DIR_DRV4
^
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Extruder.h:280:17: anm: i expansionen av makrot "WRITE"
WRITE(EXT0_DIR_PIN,!EXT0_INVERSE);
^
/tmp/arduino_build_147243/sketch/pins.h:376:23: anm: i expansionen av makrot "ORIG_E0_DIR_PIN"
#define E0_DIR_PIN ORIG_E0_DIR_PIN
^
/tmp/arduino_build_147243/sketch/RF1000.h:245:27: anm: i expansionen av makrot "E0_DIR_PIN"
#define EXT0_DIR_PIN E0_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Extruder.h:280:23: anm: i expansionen av makrot "EXT0_DIR_PIN"
WRITE(EXT0_DIR_PIN,!EXT0_INVERSE);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:68:36: fel: att sätta ihop "/* PINA.6, 72, DIR_DRV4*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_E0_DIR_PIN 28 // PINA.6, 72, DIR_DRV4
^
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Extruder.h:288:17: anm: i expansionen av makrot "WRITE"
WRITE(EXT0_DIR_PIN,EXT0_INVERSE);
^
/tmp/arduino_build_147243/sketch/pins.h:376:23: anm: i expansionen av makrot "ORIG_E0_DIR_PIN"
#define E0_DIR_PIN ORIG_E0_DIR_PIN
^
/tmp/arduino_build_147243/sketch/RF1000.h:245:27: anm: i expansionen av makrot "E0_DIR_PIN"
#define EXT0_DIR_PIN E0_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Extruder.h:288:23: anm: i expansionen av makrot "EXT0_DIR_PIN"
WRITE(EXT0_DIR_PIN,EXT0_INVERSE);
^
/tmp/arduino_build_147243/sketch/pins.h:68:36: fel: att sätta ihop "/* PINA.6, 72, DIR_DRV4*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_E0_DIR_PIN 28 // PINA.6, 72, DIR_DRV4
^
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Extruder.h:288:17: anm: i expansionen av makrot "WRITE"
WRITE(EXT0_DIR_PIN,EXT0_INVERSE);
^
/tmp/arduino_build_147243/sketch/pins.h:376:23: anm: i expansionen av makrot "ORIG_E0_DIR_PIN"
#define E0_DIR_PIN ORIG_E0_DIR_PIN
^
/tmp/arduino_build_147243/sketch/RF1000.h:245:27: anm: i expansionen av makrot "E0_DIR_PIN"
#define EXT0_DIR_PIN E0_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Extruder.h:288:23: anm: i expansionen av makrot "EXT0_DIR_PIN"
WRITE(EXT0_DIR_PIN,EXT0_INVERSE);
^
/tmp/arduino_build_147243/sketch/pins.h:68:36: fel: att sätta ihop "/* PINA.6, 72, DIR_DRV4*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_E0_DIR_PIN 28 // PINA.6, 72, DIR_DRV4
^
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Extruder.h:288:17: anm: i expansionen av makrot "WRITE"
WRITE(EXT0_DIR_PIN,EXT0_INVERSE);
^
/tmp/arduino_build_147243/sketch/pins.h:376:23: anm: i expansionen av makrot "ORIG_E0_DIR_PIN"
#define E0_DIR_PIN ORIG_E0_DIR_PIN
^
/tmp/arduino_build_147243/sketch/RF1000.h:245:27: anm: i expansionen av makrot "E0_DIR_PIN"
#define EXT0_DIR_PIN E0_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Extruder.h:288:23: anm: i expansionen av makrot "EXT0_DIR_PIN"
WRITE(EXT0_DIR_PIN,EXT0_INVERSE);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:68:36: fel: att sätta ihop "/* PINA.6, 72, DIR_DRV4*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_E0_DIR_PIN 28 // PINA.6, 72, DIR_DRV4
^
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Extruder.h:288:17: anm: i expansionen av makrot "WRITE"
WRITE(EXT0_DIR_PIN,EXT0_INVERSE);
^
/tmp/arduino_build_147243/sketch/pins.h:376:23: anm: i expansionen av makrot "ORIG_E0_DIR_PIN"
#define E0_DIR_PIN ORIG_E0_DIR_PIN
^
/tmp/arduino_build_147243/sketch/RF1000.h:245:27: anm: i expansionen av makrot "E0_DIR_PIN"
#define EXT0_DIR_PIN E0_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Extruder.h:288:23: anm: i expansionen av makrot "EXT0_DIR_PIN"
WRITE(EXT0_DIR_PIN,EXT0_INVERSE);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:69:36: fel: att sätta ihop "/* PINA.2, 76, ENA_DRV4*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_E0_ENABLE_PIN 24 // PINA.2, 76, ENA_DRV4
^
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Extruder.h:379:9: anm: i expansionen av makrot "WRITE"
WRITE(EXT0_ENABLE_PIN,EXT0_ENABLE_ON );
^
/tmp/arduino_build_147243/sketch/pins.h:377:25: anm: i expansionen av makrot "ORIG_E0_ENABLE_PIN"
#define E0_ENABLE_PIN ORIG_E0_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/RF1000.h:249:30: anm: i expansionen av makrot "E0_ENABLE_PIN"
#define EXT0_ENABLE_PIN E0_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/Extruder.h:379:15: anm: i expansionen av makrot "EXT0_ENABLE_PIN"
WRITE(EXT0_ENABLE_PIN,EXT0_ENABLE_ON );
^
/tmp/arduino_build_147243/sketch/pins.h:69:36: fel: att sätta ihop "/* PINA.2, 76, ENA_DRV4*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_E0_ENABLE_PIN 24 // PINA.2, 76, ENA_DRV4
^
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Extruder.h:379:9: anm: i expansionen av makrot "WRITE"
WRITE(EXT0_ENABLE_PIN,EXT0_ENABLE_ON );
^
/tmp/arduino_build_147243/sketch/pins.h:377:25: anm: i expansionen av makrot "ORIG_E0_ENABLE_PIN"
#define E0_ENABLE_PIN ORIG_E0_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/RF1000.h:249:30: anm: i expansionen av makrot "E0_ENABLE_PIN"
#define EXT0_ENABLE_PIN E0_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/Extruder.h:379:15: anm: i expansionen av makrot "EXT0_ENABLE_PIN"
WRITE(EXT0_ENABLE_PIN,EXT0_ENABLE_ON );
^
/tmp/arduino_build_147243/sketch/pins.h:69:36: fel: att sätta ihop "/* PINA.2, 76, ENA_DRV4*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_E0_ENABLE_PIN 24 // PINA.2, 76, ENA_DRV4
^
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Extruder.h:379:9: anm: i expansionen av makrot "WRITE"
WRITE(EXT0_ENABLE_PIN,EXT0_ENABLE_ON );
^
/tmp/arduino_build_147243/sketch/pins.h:377:25: anm: i expansionen av makrot "ORIG_E0_ENABLE_PIN"
#define E0_ENABLE_PIN ORIG_E0_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/RF1000.h:249:30: anm: i expansionen av makrot "E0_ENABLE_PIN"
#define EXT0_ENABLE_PIN E0_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/Extruder.h:379:15: anm: i expansionen av makrot "EXT0_ENABLE_PIN"
WRITE(EXT0_ENABLE_PIN,EXT0_ENABLE_ON );
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:69:36: fel: att sätta ihop "/* PINA.2, 76, ENA_DRV4*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_E0_ENABLE_PIN 24 // PINA.2, 76, ENA_DRV4
^
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Extruder.h:379:9: anm: i expansionen av makrot "WRITE"
WRITE(EXT0_ENABLE_PIN,EXT0_ENABLE_ON );
^
/tmp/arduino_build_147243/sketch/pins.h:377:25: anm: i expansionen av makrot "ORIG_E0_ENABLE_PIN"
#define E0_ENABLE_PIN ORIG_E0_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/RF1000.h:249:30: anm: i expansionen av makrot "E0_ENABLE_PIN"
#define EXT0_ENABLE_PIN E0_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/Extruder.h:379:15: anm: i expansionen av makrot "EXT0_ENABLE_PIN"
WRITE(EXT0_ENABLE_PIN,EXT0_ENABLE_ON );
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:49:36: fel: att sätta ihop "/* PIND.7, 50, ENA_DRV1*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_X_ENABLE_PIN 38 // PIND.7, 50, ENA_DRV1
^
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:266:9: anm: i expansionen av makrot "WRITE"
WRITE(X_ENABLE_PIN,!X_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:359:24: anm: i expansionen av makrot "ORIG_X_ENABLE_PIN"
#define X_ENABLE_PIN ORIG_X_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:266:15: anm: i expansionen av makrot "X_ENABLE_PIN"
WRITE(X_ENABLE_PIN,!X_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:49:36: fel: att sätta ihop "/* PIND.7, 50, ENA_DRV1*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_X_ENABLE_PIN 38 // PIND.7, 50, ENA_DRV1
^
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:266:9: anm: i expansionen av makrot "WRITE"
WRITE(X_ENABLE_PIN,!X_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:359:24: anm: i expansionen av makrot "ORIG_X_ENABLE_PIN"
#define X_ENABLE_PIN ORIG_X_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:266:15: anm: i expansionen av makrot "X_ENABLE_PIN"
WRITE(X_ENABLE_PIN,!X_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:49:36: fel: att sätta ihop "/* PIND.7, 50, ENA_DRV1*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_X_ENABLE_PIN 38 // PIND.7, 50, ENA_DRV1
^
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:266:9: anm: i expansionen av makrot "WRITE"
WRITE(X_ENABLE_PIN,!X_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:359:24: anm: i expansionen av makrot "ORIG_X_ENABLE_PIN"
#define X_ENABLE_PIN ORIG_X_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:266:15: anm: i expansionen av makrot "X_ENABLE_PIN"
WRITE(X_ENABLE_PIN,!X_ENABLE_ON);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:49:36: fel: att sätta ihop "/* PIND.7, 50, ENA_DRV1*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_X_ENABLE_PIN 38 // PIND.7, 50, ENA_DRV1
^
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:266:9: anm: i expansionen av makrot "WRITE"
WRITE(X_ENABLE_PIN,!X_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:359:24: anm: i expansionen av makrot "ORIG_X_ENABLE_PIN"
#define X_ENABLE_PIN ORIG_X_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:266:15: anm: i expansionen av makrot "X_ENABLE_PIN"
WRITE(X_ENABLE_PIN,!X_ENABLE_ON);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:55:36: fel: att sätta ihop "/* PINF.2, 95, ENA_DRV2*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Y_ENABLE_PIN 56 // PINF.2, 95, ENA_DRV2
^
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:287:9: anm: i expansionen av makrot "WRITE"
WRITE(Y_ENABLE_PIN,!Y_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:365:24: anm: i expansionen av makrot "ORIG_Y_ENABLE_PIN"
#define Y_ENABLE_PIN ORIG_Y_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:287:15: anm: i expansionen av makrot "Y_ENABLE_PIN"
WRITE(Y_ENABLE_PIN,!Y_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:55:36: fel: att sätta ihop "/* PINF.2, 95, ENA_DRV2*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Y_ENABLE_PIN 56 // PINF.2, 95, ENA_DRV2
^
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:287:9: anm: i expansionen av makrot "WRITE"
WRITE(Y_ENABLE_PIN,!Y_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:365:24: anm: i expansionen av makrot "ORIG_Y_ENABLE_PIN"
#define Y_ENABLE_PIN ORIG_Y_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:287:15: anm: i expansionen av makrot "Y_ENABLE_PIN"
WRITE(Y_ENABLE_PIN,!Y_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:55:36: fel: att sätta ihop "/* PINF.2, 95, ENA_DRV2*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Y_ENABLE_PIN 56 // PINF.2, 95, ENA_DRV2
^
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:287:9: anm: i expansionen av makrot "WRITE"
WRITE(Y_ENABLE_PIN,!Y_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:365:24: anm: i expansionen av makrot "ORIG_Y_ENABLE_PIN"
#define Y_ENABLE_PIN ORIG_Y_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:287:15: anm: i expansionen av makrot "Y_ENABLE_PIN"
WRITE(Y_ENABLE_PIN,!Y_ENABLE_ON);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:55:36: fel: att sätta ihop "/* PINF.2, 95, ENA_DRV2*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Y_ENABLE_PIN 56 // PINF.2, 95, ENA_DRV2
^
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:287:9: anm: i expansionen av makrot "WRITE"
WRITE(Y_ENABLE_PIN,!Y_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:365:24: anm: i expansionen av makrot "ORIG_Y_ENABLE_PIN"
#define Y_ENABLE_PIN ORIG_Y_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:287:15: anm: i expansionen av makrot "Y_ENABLE_PIN"
WRITE(Y_ENABLE_PIN,!Y_ENABLE_ON);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:61:36: fel: att sätta ihop "/* PINK.0, 89, ENA_DRV3*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_ENABLE_PIN 62 // PINK.0, 89, ENA_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:308:9: anm: i expansionen av makrot "WRITE"
WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:371:24: anm: i expansionen av makrot "ORIG_Z_ENABLE_PIN"
#define Z_ENABLE_PIN ORIG_Z_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:308:15: anm: i expansionen av makrot "Z_ENABLE_PIN"
WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:61:36: fel: att sätta ihop "/* PINK.0, 89, ENA_DRV3*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_ENABLE_PIN 62 // PINK.0, 89, ENA_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:308:9: anm: i expansionen av makrot "WRITE"
WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:371:24: anm: i expansionen av makrot "ORIG_Z_ENABLE_PIN"
#define Z_ENABLE_PIN ORIG_Z_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:308:15: anm: i expansionen av makrot "Z_ENABLE_PIN"
WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:61:36: fel: att sätta ihop "/* PINK.0, 89, ENA_DRV3*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_ENABLE_PIN 62 // PINK.0, 89, ENA_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:308:9: anm: i expansionen av makrot "WRITE"
WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:371:24: anm: i expansionen av makrot "ORIG_Z_ENABLE_PIN"
#define Z_ENABLE_PIN ORIG_Z_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:308:15: anm: i expansionen av makrot "Z_ENABLE_PIN"
WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:61:36: fel: att sätta ihop "/* PINK.0, 89, ENA_DRV3*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_ENABLE_PIN 62 // PINK.0, 89, ENA_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:308:9: anm: i expansionen av makrot "WRITE"
WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:371:24: anm: i expansionen av makrot "ORIG_Z_ENABLE_PIN"
#define Z_ENABLE_PIN ORIG_Z_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:308:15: anm: i expansionen av makrot "Z_ENABLE_PIN"
WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:49:36: fel: att sätta ihop "/* PIND.7, 50, ENA_DRV1*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_X_ENABLE_PIN 38 // PIND.7, 50, ENA_DRV1
^
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:334:9: anm: i expansionen av makrot "WRITE"
WRITE(X_ENABLE_PIN, X_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:359:24: anm: i expansionen av makrot "ORIG_X_ENABLE_PIN"
#define X_ENABLE_PIN ORIG_X_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:334:15: anm: i expansionen av makrot "X_ENABLE_PIN"
WRITE(X_ENABLE_PIN, X_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:49:36: fel: att sätta ihop "/* PIND.7, 50, ENA_DRV1*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_X_ENABLE_PIN 38 // PIND.7, 50, ENA_DRV1
^
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:334:9: anm: i expansionen av makrot "WRITE"
WRITE(X_ENABLE_PIN, X_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:359:24: anm: i expansionen av makrot "ORIG_X_ENABLE_PIN"
#define X_ENABLE_PIN ORIG_X_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:334:15: anm: i expansionen av makrot "X_ENABLE_PIN"
WRITE(X_ENABLE_PIN, X_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:49:36: fel: att sätta ihop "/* PIND.7, 50, ENA_DRV1*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_X_ENABLE_PIN 38 // PIND.7, 50, ENA_DRV1
^
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:334:9: anm: i expansionen av makrot "WRITE"
WRITE(X_ENABLE_PIN, X_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:359:24: anm: i expansionen av makrot "ORIG_X_ENABLE_PIN"
#define X_ENABLE_PIN ORIG_X_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:334:15: anm: i expansionen av makrot "X_ENABLE_PIN"
WRITE(X_ENABLE_PIN, X_ENABLE_ON);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:49:36: fel: att sätta ihop "/* PIND.7, 50, ENA_DRV1*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_X_ENABLE_PIN 38 // PIND.7, 50, ENA_DRV1
^
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:334:9: anm: i expansionen av makrot "WRITE"
WRITE(X_ENABLE_PIN, X_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:359:24: anm: i expansionen av makrot "ORIG_X_ENABLE_PIN"
#define X_ENABLE_PIN ORIG_X_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:334:15: anm: i expansionen av makrot "X_ENABLE_PIN"
WRITE(X_ENABLE_PIN, X_ENABLE_ON);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:55:36: fel: att sätta ihop "/* PINF.2, 95, ENA_DRV2*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Y_ENABLE_PIN 56 // PINF.2, 95, ENA_DRV2
^
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:355:9: anm: i expansionen av makrot "WRITE"
WRITE(Y_ENABLE_PIN, Y_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:365:24: anm: i expansionen av makrot "ORIG_Y_ENABLE_PIN"
#define Y_ENABLE_PIN ORIG_Y_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:355:15: anm: i expansionen av makrot "Y_ENABLE_PIN"
WRITE(Y_ENABLE_PIN, Y_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:55:36: fel: att sätta ihop "/* PINF.2, 95, ENA_DRV2*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Y_ENABLE_PIN 56 // PINF.2, 95, ENA_DRV2
^
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:355:9: anm: i expansionen av makrot "WRITE"
WRITE(Y_ENABLE_PIN, Y_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:365:24: anm: i expansionen av makrot "ORIG_Y_ENABLE_PIN"
#define Y_ENABLE_PIN ORIG_Y_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:355:15: anm: i expansionen av makrot "Y_ENABLE_PIN"
WRITE(Y_ENABLE_PIN, Y_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:55:36: fel: att sätta ihop "/* PINF.2, 95, ENA_DRV2*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Y_ENABLE_PIN 56 // PINF.2, 95, ENA_DRV2
^
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:355:9: anm: i expansionen av makrot "WRITE"
WRITE(Y_ENABLE_PIN, Y_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:365:24: anm: i expansionen av makrot "ORIG_Y_ENABLE_PIN"
#define Y_ENABLE_PIN ORIG_Y_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:355:15: anm: i expansionen av makrot "Y_ENABLE_PIN"
WRITE(Y_ENABLE_PIN, Y_ENABLE_ON);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:55:36: fel: att sätta ihop "/* PINF.2, 95, ENA_DRV2*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Y_ENABLE_PIN 56 // PINF.2, 95, ENA_DRV2
^
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:355:9: anm: i expansionen av makrot "WRITE"
WRITE(Y_ENABLE_PIN, Y_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:365:24: anm: i expansionen av makrot "ORIG_Y_ENABLE_PIN"
#define Y_ENABLE_PIN ORIG_Y_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:355:15: anm: i expansionen av makrot "Y_ENABLE_PIN"
WRITE(Y_ENABLE_PIN, Y_ENABLE_ON);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:61:36: fel: att sätta ihop "/* PINK.0, 89, ENA_DRV3*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_ENABLE_PIN 62 // PINK.0, 89, ENA_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:375:9: anm: i expansionen av makrot "WRITE"
WRITE(Z_ENABLE_PIN, Z_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:371:24: anm: i expansionen av makrot "ORIG_Z_ENABLE_PIN"
#define Z_ENABLE_PIN ORIG_Z_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:375:15: anm: i expansionen av makrot "Z_ENABLE_PIN"
WRITE(Z_ENABLE_PIN, Z_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:61:36: fel: att sätta ihop "/* PINK.0, 89, ENA_DRV3*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_ENABLE_PIN 62 // PINK.0, 89, ENA_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:375:9: anm: i expansionen av makrot "WRITE"
WRITE(Z_ENABLE_PIN, Z_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:371:24: anm: i expansionen av makrot "ORIG_Z_ENABLE_PIN"
#define Z_ENABLE_PIN ORIG_Z_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:375:15: anm: i expansionen av makrot "Z_ENABLE_PIN"
WRITE(Z_ENABLE_PIN, Z_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:61:36: fel: att sätta ihop "/* PINK.0, 89, ENA_DRV3*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_ENABLE_PIN 62 // PINK.0, 89, ENA_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:375:9: anm: i expansionen av makrot "WRITE"
WRITE(Z_ENABLE_PIN, Z_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:371:24: anm: i expansionen av makrot "ORIG_Z_ENABLE_PIN"
#define Z_ENABLE_PIN ORIG_Z_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:375:15: anm: i expansionen av makrot "Z_ENABLE_PIN"
WRITE(Z_ENABLE_PIN, Z_ENABLE_ON);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:61:36: fel: att sätta ihop "/* PINK.0, 89, ENA_DRV3*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_ENABLE_PIN 62 // PINK.0, 89, ENA_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:375:9: anm: i expansionen av makrot "WRITE"
WRITE(Z_ENABLE_PIN, Z_ENABLE_ON);
^
/tmp/arduino_build_147243/sketch/pins.h:371:24: anm: i expansionen av makrot "ORIG_Z_ENABLE_PIN"
#define Z_ENABLE_PIN ORIG_Z_ENABLE_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:375:15: anm: i expansionen av makrot "Z_ENABLE_PIN"
WRITE(Z_ENABLE_PIN, Z_ENABLE_ON);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:48:36: fel: att sätta ihop "/* PINF.1, 96, DIR_DRV1*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_X_DIR_PIN 55 // PINF.1, 96, DIR_DRV1
^
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:404:17: anm: i expansionen av makrot "WRITE"
WRITE(X_DIR_PIN,!INVERT_X_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:358:22: anm: i expansionen av makrot "ORIG_X_DIR_PIN"
#define X_DIR_PIN ORIG_X_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:404:23: anm: i expansionen av makrot "X_DIR_PIN"
WRITE(X_DIR_PIN,!INVERT_X_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:48:36: fel: att sätta ihop "/* PINF.1, 96, DIR_DRV1*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_X_DIR_PIN 55 // PINF.1, 96, DIR_DRV1
^
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:404:17: anm: i expansionen av makrot "WRITE"
WRITE(X_DIR_PIN,!INVERT_X_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:358:22: anm: i expansionen av makrot "ORIG_X_DIR_PIN"
#define X_DIR_PIN ORIG_X_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:404:23: anm: i expansionen av makrot "X_DIR_PIN"
WRITE(X_DIR_PIN,!INVERT_X_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:48:36: fel: att sätta ihop "/* PINF.1, 96, DIR_DRV1*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_X_DIR_PIN 55 // PINF.1, 96, DIR_DRV1
^
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:404:17: anm: i expansionen av makrot "WRITE"
WRITE(X_DIR_PIN,!INVERT_X_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:358:22: anm: i expansionen av makrot "ORIG_X_DIR_PIN"
#define X_DIR_PIN ORIG_X_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:404:23: anm: i expansionen av makrot "X_DIR_PIN"
WRITE(X_DIR_PIN,!INVERT_X_DIR);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:48:36: fel: att sätta ihop "/* PINF.1, 96, DIR_DRV1*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_X_DIR_PIN 55 // PINF.1, 96, DIR_DRV1
^
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:404:17: anm: i expansionen av makrot "WRITE"
WRITE(X_DIR_PIN,!INVERT_X_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:358:22: anm: i expansionen av makrot "ORIG_X_DIR_PIN"
#define X_DIR_PIN ORIG_X_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:404:23: anm: i expansionen av makrot "X_DIR_PIN"
WRITE(X_DIR_PIN,!INVERT_X_DIR);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:48:36: fel: att sätta ihop "/* PINF.1, 96, DIR_DRV1*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_X_DIR_PIN 55 // PINF.1, 96, DIR_DRV1
^
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:418:17: anm: i expansionen av makrot "WRITE"
WRITE(X_DIR_PIN,INVERT_X_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:358:22: anm: i expansionen av makrot "ORIG_X_DIR_PIN"
#define X_DIR_PIN ORIG_X_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:418:23: anm: i expansionen av makrot "X_DIR_PIN"
WRITE(X_DIR_PIN,INVERT_X_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:48:36: fel: att sätta ihop "/* PINF.1, 96, DIR_DRV1*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_X_DIR_PIN 55 // PINF.1, 96, DIR_DRV1
^
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:418:17: anm: i expansionen av makrot "WRITE"
WRITE(X_DIR_PIN,INVERT_X_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:358:22: anm: i expansionen av makrot "ORIG_X_DIR_PIN"
#define X_DIR_PIN ORIG_X_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:418:23: anm: i expansionen av makrot "X_DIR_PIN"
WRITE(X_DIR_PIN,INVERT_X_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:48:36: fel: att sätta ihop "/* PINF.1, 96, DIR_DRV1*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_X_DIR_PIN 55 // PINF.1, 96, DIR_DRV1
^
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:418:17: anm: i expansionen av makrot "WRITE"
WRITE(X_DIR_PIN,INVERT_X_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:358:22: anm: i expansionen av makrot "ORIG_X_DIR_PIN"
#define X_DIR_PIN ORIG_X_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:418:23: anm: i expansionen av makrot "X_DIR_PIN"
WRITE(X_DIR_PIN,INVERT_X_DIR);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:48:36: fel: att sätta ihop "/* PINF.1, 96, DIR_DRV1*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_X_DIR_PIN 55 // PINF.1, 96, DIR_DRV1
^
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:418:17: anm: i expansionen av makrot "WRITE"
WRITE(X_DIR_PIN,INVERT_X_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:358:22: anm: i expansionen av makrot "ORIG_X_DIR_PIN"
#define X_DIR_PIN ORIG_X_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:418:23: anm: i expansionen av makrot "X_DIR_PIN"
WRITE(X_DIR_PIN,INVERT_X_DIR);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:54:36: fel: att sätta ihop "/* PINF.7, 90, DIR_DRV2*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Y_DIR_PIN 61 // PINF.7, 90, DIR_DRV2
^
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:441:17: anm: i expansionen av makrot "WRITE"
WRITE(Y_DIR_PIN,!INVERT_Y_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:364:22: anm: i expansionen av makrot "ORIG_Y_DIR_PIN"
#define Y_DIR_PIN ORIG_Y_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:441:23: anm: i expansionen av makrot "Y_DIR_PIN"
WRITE(Y_DIR_PIN,!INVERT_Y_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:54:36: fel: att sätta ihop "/* PINF.7, 90, DIR_DRV2*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Y_DIR_PIN 61 // PINF.7, 90, DIR_DRV2
^
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:441:17: anm: i expansionen av makrot "WRITE"
WRITE(Y_DIR_PIN,!INVERT_Y_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:364:22: anm: i expansionen av makrot "ORIG_Y_DIR_PIN"
#define Y_DIR_PIN ORIG_Y_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:441:23: anm: i expansionen av makrot "Y_DIR_PIN"
WRITE(Y_DIR_PIN,!INVERT_Y_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:54:36: fel: att sätta ihop "/* PINF.7, 90, DIR_DRV2*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Y_DIR_PIN 61 // PINF.7, 90, DIR_DRV2
^
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:441:17: anm: i expansionen av makrot "WRITE"
WRITE(Y_DIR_PIN,!INVERT_Y_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:364:22: anm: i expansionen av makrot "ORIG_Y_DIR_PIN"
#define Y_DIR_PIN ORIG_Y_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:441:23: anm: i expansionen av makrot "Y_DIR_PIN"
WRITE(Y_DIR_PIN,!INVERT_Y_DIR);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:54:36: fel: att sätta ihop "/* PINF.7, 90, DIR_DRV2*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Y_DIR_PIN 61 // PINF.7, 90, DIR_DRV2
^
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:441:17: anm: i expansionen av makrot "WRITE"
WRITE(Y_DIR_PIN,!INVERT_Y_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:364:22: anm: i expansionen av makrot "ORIG_Y_DIR_PIN"
#define Y_DIR_PIN ORIG_Y_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:441:23: anm: i expansionen av makrot "Y_DIR_PIN"
WRITE(Y_DIR_PIN,!INVERT_Y_DIR);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:54:36: fel: att sätta ihop "/* PINF.7, 90, DIR_DRV2*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Y_DIR_PIN 61 // PINF.7, 90, DIR_DRV2
^
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:455:17: anm: i expansionen av makrot "WRITE"
WRITE(Y_DIR_PIN,INVERT_Y_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:364:22: anm: i expansionen av makrot "ORIG_Y_DIR_PIN"
#define Y_DIR_PIN ORIG_Y_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:455:23: anm: i expansionen av makrot "Y_DIR_PIN"
WRITE(Y_DIR_PIN,INVERT_Y_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:54:36: fel: att sätta ihop "/* PINF.7, 90, DIR_DRV2*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Y_DIR_PIN 61 // PINF.7, 90, DIR_DRV2
^
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:455:17: anm: i expansionen av makrot "WRITE"
WRITE(Y_DIR_PIN,INVERT_Y_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:364:22: anm: i expansionen av makrot "ORIG_Y_DIR_PIN"
#define Y_DIR_PIN ORIG_Y_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:455:23: anm: i expansionen av makrot "Y_DIR_PIN"
WRITE(Y_DIR_PIN,INVERT_Y_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:54:36: fel: att sätta ihop "/* PINF.7, 90, DIR_DRV2*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Y_DIR_PIN 61 // PINF.7, 90, DIR_DRV2
^
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:455:17: anm: i expansionen av makrot "WRITE"
WRITE(Y_DIR_PIN,INVERT_Y_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:364:22: anm: i expansionen av makrot "ORIG_Y_DIR_PIN"
#define Y_DIR_PIN ORIG_Y_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:455:23: anm: i expansionen av makrot "Y_DIR_PIN"
WRITE(Y_DIR_PIN,INVERT_Y_DIR);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:54:36: fel: att sätta ihop "/* PINF.7, 90, DIR_DRV2*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Y_DIR_PIN 61 // PINF.7, 90, DIR_DRV2
^
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:455:17: anm: i expansionen av makrot "WRITE"
WRITE(Y_DIR_PIN,INVERT_Y_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:364:22: anm: i expansionen av makrot "ORIG_Y_DIR_PIN"
#define Y_DIR_PIN ORIG_Y_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:455:23: anm: i expansionen av makrot "Y_DIR_PIN"
WRITE(Y_DIR_PIN,INVERT_Y_DIR);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/* PINL.1, 36, DIR_DRV3*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:476:4: anm: i expansionen av makrot "WRITE"
WRITE( Z_DIR_PIN, !INVERT_Z_DIR );
^
/tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
#define Z_DIR_PIN ORIG_Z_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:476:11: anm: i expansionen av makrot "Z_DIR_PIN"
WRITE( Z_DIR_PIN, !INVERT_Z_DIR );
^
/tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/* PINL.1, 36, DIR_DRV3*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:476:4: anm: i expansionen av makrot "WRITE"
WRITE( Z_DIR_PIN, !INVERT_Z_DIR );
^
/tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
#define Z_DIR_PIN ORIG_Z_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:476:11: anm: i expansionen av makrot "Z_DIR_PIN"
WRITE( Z_DIR_PIN, !INVERT_Z_DIR );
^
/tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/* PINL.1, 36, DIR_DRV3*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:476:4: anm: i expansionen av makrot "WRITE"
WRITE( Z_DIR_PIN, !INVERT_Z_DIR );
^
/tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
#define Z_DIR_PIN ORIG_Z_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:476:11: anm: i expansionen av makrot "Z_DIR_PIN"
WRITE( Z_DIR_PIN, !INVERT_Z_DIR );
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/* PINL.1, 36, DIR_DRV3*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:476:4: anm: i expansionen av makrot "WRITE"
WRITE( Z_DIR_PIN, !INVERT_Z_DIR );
^
/tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
#define Z_DIR_PIN ORIG_Z_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:476:11: anm: i expansionen av makrot "Z_DIR_PIN"
WRITE( Z_DIR_PIN, !INVERT_Z_DIR );
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/* PINL.1, 36, DIR_DRV3*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:491:4: anm: i expansionen av makrot "WRITE"
WRITE( Z_DIR_PIN, INVERT_Z_DIR );
^
/tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
#define Z_DIR_PIN ORIG_Z_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:491:11: anm: i expansionen av makrot "Z_DIR_PIN"
WRITE( Z_DIR_PIN, INVERT_Z_DIR );
^
/tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/* PINL.1, 36, DIR_DRV3*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:491:4: anm: i expansionen av makrot "WRITE"
WRITE( Z_DIR_PIN, INVERT_Z_DIR );
^
/tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
#define Z_DIR_PIN ORIG_Z_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:491:11: anm: i expansionen av makrot "Z_DIR_PIN"
WRITE( Z_DIR_PIN, INVERT_Z_DIR );
^
/tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/* PINL.1, 36, DIR_DRV3*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:491:4: anm: i expansionen av makrot "WRITE"
WRITE( Z_DIR_PIN, INVERT_Z_DIR );
^
/tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
#define Z_DIR_PIN ORIG_Z_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:491:11: anm: i expansionen av makrot "Z_DIR_PIN"
WRITE( Z_DIR_PIN, INVERT_Z_DIR );
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/* PINL.1, 36, DIR_DRV3*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:491:4: anm: i expansionen av makrot "WRITE"
WRITE( Z_DIR_PIN, INVERT_Z_DIR );
^
/tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
#define Z_DIR_PIN ORIG_Z_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:491:11: anm: i expansionen av makrot "Z_DIR_PIN"
WRITE( Z_DIR_PIN, INVERT_Z_DIR );
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/* PINL.1, 36, DIR_DRV3*/" och "_RPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:40:37: anm: i definitionen av makrot "_READ"
#define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
^
/tmp/arduino_build_147243/sketch/Printer.h:507:18: anm: i expansionen av makrot "READ"
return ((READ(Z_DIR_PIN)!=0) ^ INVERT_Z_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
#define Z_DIR_PIN ORIG_Z_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:507:23: anm: i expansionen av makrot "Z_DIR_PIN"
return ((READ(Z_DIR_PIN)!=0) ^ INVERT_Z_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/* PINL.1, 36, DIR_DRV3*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:40:64: anm: i definitionen av makrot "_READ"
#define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
^
/tmp/arduino_build_147243/sketch/Printer.h:507:18: anm: i expansionen av makrot "READ"
return ((READ(Z_DIR_PIN)!=0) ^ INVERT_Z_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
#define Z_DIR_PIN ORIG_Z_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:507:23: anm: i expansionen av makrot "Z_DIR_PIN"
return ((READ(Z_DIR_PIN)!=0) ^ INVERT_Z_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:54:36: fel: att sätta ihop "/* PINF.7, 90, DIR_DRV2*/" och "_RPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Y_DIR_PIN 61 // PINF.7, 90, DIR_DRV2
^
/tmp/arduino_build_147243/sketch/fastio.h:40:37: anm: i definitionen av makrot "_READ"
#define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
^
/tmp/arduino_build_147243/sketch/Printer.h:525:17: anm: i expansionen av makrot "READ"
return((READ(Y_DIR_PIN)!=0) ^ INVERT_Y_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:364:22: anm: i expansionen av makrot "ORIG_Y_DIR_PIN"
#define Y_DIR_PIN ORIG_Y_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:525:22: anm: i expansionen av makrot "Y_DIR_PIN"
return((READ(Y_DIR_PIN)!=0) ^ INVERT_Y_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:54:36: fel: att sätta ihop "/* PINF.7, 90, DIR_DRV2*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Y_DIR_PIN 61 // PINF.7, 90, DIR_DRV2
^
/tmp/arduino_build_147243/sketch/fastio.h:40:64: anm: i definitionen av makrot "_READ"
#define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
^
/tmp/arduino_build_147243/sketch/Printer.h:525:17: anm: i expansionen av makrot "READ"
return((READ(Y_DIR_PIN)!=0) ^ INVERT_Y_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:364:22: anm: i expansionen av makrot "ORIG_Y_DIR_PIN"
#define Y_DIR_PIN ORIG_Y_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:525:22: anm: i expansionen av makrot "Y_DIR_PIN"
return((READ(Y_DIR_PIN)!=0) ^ INVERT_Y_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:48:36: fel: att sätta ihop "/* PINF.1, 96, DIR_DRV1*/" och "_RPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_X_DIR_PIN 55 // PINF.1, 96, DIR_DRV1
^
/tmp/arduino_build_147243/sketch/fastio.h:40:37: anm: i definitionen av makrot "_READ"
#define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
^
/tmp/arduino_build_147243/sketch/Printer.h:530:17: anm: i expansionen av makrot "READ"
return((READ(X_DIR_PIN)!=0) ^ INVERT_X_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:358:22: anm: i expansionen av makrot "ORIG_X_DIR_PIN"
#define X_DIR_PIN ORIG_X_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:530:22: anm: i expansionen av makrot "X_DIR_PIN"
return((READ(X_DIR_PIN)!=0) ^ INVERT_X_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:48:36: fel: att sätta ihop "/* PINF.1, 96, DIR_DRV1*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_X_DIR_PIN 55 // PINF.1, 96, DIR_DRV1
^
/tmp/arduino_build_147243/sketch/fastio.h:40:64: anm: i definitionen av makrot "_READ"
#define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
^
/tmp/arduino_build_147243/sketch/Printer.h:530:17: anm: i expansionen av makrot "READ"
return((READ(X_DIR_PIN)!=0) ^ INVERT_X_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:358:22: anm: i expansionen av makrot "ORIG_X_DIR_PIN"
#define X_DIR_PIN ORIG_X_DIR_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:530:22: anm: i expansionen av makrot "X_DIR_PIN"
return((READ(X_DIR_PIN)!=0) ^ INVERT_X_DIR);
^
/tmp/arduino_build_147243/sketch/pins.h:50:36: fel: att sätta ihop "/* PINE.5, 7, ES1*/" och "_RPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_X_MIN_PIN 3 // PINE.5, 7, ES1
^
/tmp/arduino_build_147243/sketch/fastio.h:40:37: anm: i definitionen av makrot "_READ"
#define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
^
/tmp/arduino_build_147243/sketch/Printer.h:636:16: anm: i expansionen av makrot "READ"
return READ(X_MIN_PIN) != ENDSTOP_X_MIN_INVERTING;
^
/tmp/arduino_build_147243/sketch/pins.h:360:22: anm: i expansionen av makrot "ORIG_X_MIN_PIN"
#define X_MIN_PIN ORIG_X_MIN_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:636:21: anm: i expansionen av makrot "X_MIN_PIN"
return READ(X_MIN_PIN) != ENDSTOP_X_MIN_INVERTING;
^
/tmp/arduino_build_147243/sketch/pins.h:50:36: fel: att sätta ihop "/* PINE.5, 7, ES1*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_X_MIN_PIN 3 // PINE.5, 7, ES1
^
/tmp/arduino_build_147243/sketch/fastio.h:40:64: anm: i definitionen av makrot "_READ"
#define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
^
/tmp/arduino_build_147243/sketch/Printer.h:636:16: anm: i expansionen av makrot "READ"
return READ(X_MIN_PIN) != ENDSTOP_X_MIN_INVERTING;
^
/tmp/arduino_build_147243/sketch/pins.h:360:22: anm: i expansionen av makrot "ORIG_X_MIN_PIN"
#define X_MIN_PIN ORIG_X_MIN_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:636:21: anm: i expansionen av makrot "X_MIN_PIN"
return READ(X_MIN_PIN) != ENDSTOP_X_MIN_INVERTING;
^
/tmp/arduino_build_147243/sketch/pins.h:56:36: fel: att sätta ihop "/* PINE.4, 6, ES2*/" och "_RPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Y_MIN_PIN 2 // PINE.4, 6, ES2
^
/tmp/arduino_build_147243/sketch/fastio.h:40:37: anm: i definitionen av makrot "_READ"
#define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
^
/tmp/arduino_build_147243/sketch/Printer.h:645:16: anm: i expansionen av makrot "READ"
return READ(Y_MIN_PIN) != ENDSTOP_Y_MIN_INVERTING;
^
/tmp/arduino_build_147243/sketch/pins.h:366:22: anm: i expansionen av makrot "ORIG_Y_MIN_PIN"
#define Y_MIN_PIN ORIG_Y_MIN_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:645:21: anm: i expansionen av makrot "Y_MIN_PIN"
return READ(Y_MIN_PIN) != ENDSTOP_Y_MIN_INVERTING;
^
/tmp/arduino_build_147243/sketch/pins.h:56:36: fel: att sätta ihop "/* PINE.4, 6, ES2*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Y_MIN_PIN 2 // PINE.4, 6, ES2
^
/tmp/arduino_build_147243/sketch/fastio.h:40:64: anm: i definitionen av makrot "_READ"
#define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
^
/tmp/arduino_build_147243/sketch/Printer.h:645:16: anm: i expansionen av makrot "READ"
return READ(Y_MIN_PIN) != ENDSTOP_Y_MIN_INVERTING;
^
/tmp/arduino_build_147243/sketch/pins.h:366:22: anm: i expansionen av makrot "ORIG_Y_MIN_PIN"
#define Y_MIN_PIN ORIG_Y_MIN_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:645:21: anm: i expansionen av makrot "Y_MIN_PIN"
return READ(Y_MIN_PIN) != ENDSTOP_Y_MIN_INVERTING;
^
/tmp/arduino_build_147243/sketch/pins.h:64:36: fel: att sätta ihop "/* PINC.6, 59, ES3*/" och "_RPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_MIN_PIN 31 // PINC.6, 59, ES3
^
/tmp/arduino_build_147243/sketch/fastio.h:40:37: anm: i definitionen av makrot "_READ"
#define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
^
/tmp/arduino_build_147243/sketch/Printer.h:663:12: anm: i expansionen av makrot "READ"
return READ(Z_MIN_PIN) != ENDSTOP_Z_MIN_INVERTING;
^
/tmp/arduino_build_147243/sketch/pins.h:372:22: anm: i expansionen av makrot "ORIG_Z_MIN_PIN"
#define Z_MIN_PIN ORIG_Z_MIN_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:663:17: anm: i expansionen av makrot "Z_MIN_PIN"
return READ(Z_MIN_PIN) != ENDSTOP_Z_MIN_INVERTING;
^
/tmp/arduino_build_147243/sketch/pins.h:64:36: fel: att sätta ihop "/* PINC.6, 59, ES3*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_MIN_PIN 31 // PINC.6, 59, ES3
^
/tmp/arduino_build_147243/sketch/fastio.h:40:64: anm: i definitionen av makrot "_READ"
#define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
^
/tmp/arduino_build_147243/sketch/Printer.h:663:12: anm: i expansionen av makrot "READ"
return READ(Z_MIN_PIN) != ENDSTOP_Z_MIN_INVERTING;
^
/tmp/arduino_build_147243/sketch/pins.h:372:22: anm: i expansionen av makrot "ORIG_Z_MIN_PIN"
#define Z_MIN_PIN ORIG_Z_MIN_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:663:17: anm: i expansionen av makrot "Z_MIN_PIN"
return READ(Z_MIN_PIN) != ENDSTOP_Z_MIN_INVERTING;
^
/tmp/arduino_build_147243/sketch/pins.h:64:36: fel: att sätta ihop "/* PINC.6, 59, ES3*/" och "_RPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_MIN_PIN 31 // PINC.6, 59, ES3
^
/tmp/arduino_build_147243/sketch/fastio.h:40:37: anm: i definitionen av makrot "_READ"
#define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
^
/tmp/arduino_build_147243/sketch/Printer.h:675:7: anm: i expansionen av makrot "READ"
if( READ(Z_MIN_PIN) != ENDSTOP_Z_MIN_INVERTING )
^
/tmp/arduino_build_147243/sketch/pins.h:372:22: anm: i expansionen av makrot "ORIG_Z_MIN_PIN"
#define Z_MIN_PIN ORIG_Z_MIN_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:675:12: anm: i expansionen av makrot "Z_MIN_PIN"
if( READ(Z_MIN_PIN) != ENDSTOP_Z_MIN_INVERTING )
^
/tmp/arduino_build_147243/sketch/pins.h:64:36: fel: att sätta ihop "/* PINC.6, 59, ES3*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_MIN_PIN 31 // PINC.6, 59, ES3
^
/tmp/arduino_build_147243/sketch/fastio.h:40:64: anm: i definitionen av makrot "_READ"
#define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
^
/tmp/arduino_build_147243/sketch/Printer.h:675:7: anm: i expansionen av makrot "READ"
if( READ(Z_MIN_PIN) != ENDSTOP_Z_MIN_INVERTING )
^
/tmp/arduino_build_147243/sketch/pins.h:372:22: anm: i expansionen av makrot "ORIG_Z_MIN_PIN"
#define Z_MIN_PIN ORIG_Z_MIN_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:675:12: anm: i expansionen av makrot "Z_MIN_PIN"
if( READ(Z_MIN_PIN) != ENDSTOP_Z_MIN_INVERTING )
^
/tmp/arduino_build_147243/sketch/pins.h:65:36: fel: att sätta ihop "/* PINC.6, 59, ES3*/" och "_RPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_MAX_PIN 31 // PINC.6, 59, ES3
^
/tmp/arduino_build_147243/sketch/fastio.h:40:37: anm: i definitionen av makrot "_READ"
#define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
^
/tmp/arduino_build_147243/sketch/Printer.h:763:12: anm: i expansionen av makrot "READ"
return READ(Z_MAX_PIN) != ENDSTOP_Z_MAX_INVERTING;
^
/tmp/arduino_build_147243/sketch/pins.h:373:22: anm: i expansionen av makrot "ORIG_Z_MAX_PIN"
#define Z_MAX_PIN ORIG_Z_MAX_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:763:17: anm: i expansionen av makrot "Z_MAX_PIN"
return READ(Z_MAX_PIN) != ENDSTOP_Z_MAX_INVERTING;
^
/tmp/arduino_build_147243/sketch/pins.h:65:36: fel: att sätta ihop "/* PINC.6, 59, ES3*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_MAX_PIN 31 // PINC.6, 59, ES3
^
/tmp/arduino_build_147243/sketch/fastio.h:40:64: anm: i definitionen av makrot "_READ"
#define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
^
/tmp/arduino_build_147243/sketch/Printer.h:763:12: anm: i expansionen av makrot "READ"
return READ(Z_MAX_PIN) != ENDSTOP_Z_MAX_INVERTING;
^
/tmp/arduino_build_147243/sketch/pins.h:373:22: anm: i expansionen av makrot "ORIG_Z_MAX_PIN"
#define Z_MAX_PIN ORIG_Z_MAX_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:763:17: anm: i expansionen av makrot "Z_MAX_PIN"
return READ(Z_MAX_PIN) != ENDSTOP_Z_MAX_INVERTING;
^
/tmp/arduino_build_147243/sketch/pins.h:65:36: fel: att sätta ihop "/* PINC.6, 59, ES3*/" och "_RPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_MAX_PIN 31 // PINC.6, 59, ES3
^
/tmp/arduino_build_147243/sketch/fastio.h:40:37: anm: i definitionen av makrot "_READ"
#define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
^
/tmp/arduino_build_147243/sketch/Printer.h:775:7: anm: i expansionen av makrot "READ"
if( READ(Z_MAX_PIN) != ENDSTOP_Z_MAX_INVERTING )
^
/tmp/arduino_build_147243/sketch/pins.h:373:22: anm: i expansionen av makrot "ORIG_Z_MAX_PIN"
#define Z_MAX_PIN ORIG_Z_MAX_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:775:12: anm: i expansionen av makrot "Z_MAX_PIN"
if( READ(Z_MAX_PIN) != ENDSTOP_Z_MAX_INVERTING )
^
/tmp/arduino_build_147243/sketch/pins.h:65:36: fel: att sätta ihop "/* PINC.6, 59, ES3*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_MAX_PIN 31 // PINC.6, 59, ES3
^
/tmp/arduino_build_147243/sketch/fastio.h:40:64: anm: i definitionen av makrot "_READ"
#define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
^
/tmp/arduino_build_147243/sketch/Printer.h:775:7: anm: i expansionen av makrot "READ"
if( READ(Z_MAX_PIN) != ENDSTOP_Z_MAX_INVERTING )
^
/tmp/arduino_build_147243/sketch/pins.h:373:22: anm: i expansionen av makrot "ORIG_Z_MAX_PIN"
#define Z_MAX_PIN ORIG_Z_MAX_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:775:12: anm: i expansionen av makrot "Z_MAX_PIN"
if( READ(Z_MAX_PIN) != ENDSTOP_Z_MAX_INVERTING )
^
/tmp/arduino_build_147243/sketch/pins.h:47:36: fel: att sätta ihop "/* PINF.0, 97, STP_DRV1*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_X_STEP_PIN 54 // PINF.0, 97, STP_DRV1
^
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:898:9: anm: i expansionen av makrot "WRITE"
WRITE(X_STEP_PIN,LOW);
^
/tmp/arduino_build_147243/sketch/pins.h:357:23: anm: i expansionen av makrot "ORIG_X_STEP_PIN"
#define X_STEP_PIN ORIG_X_STEP_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:898:15: anm: i expansionen av makrot "X_STEP_PIN"
WRITE(X_STEP_PIN,LOW);
^
/tmp/arduino_build_147243/sketch/pins.h:47:36: fel: att sätta ihop "/* PINF.0, 97, STP_DRV1*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_X_STEP_PIN 54 // PINF.0, 97, STP_DRV1
^
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:898:9: anm: i expansionen av makrot "WRITE"
WRITE(X_STEP_PIN,LOW);
^
/tmp/arduino_build_147243/sketch/pins.h:357:23: anm: i expansionen av makrot "ORIG_X_STEP_PIN"
#define X_STEP_PIN ORIG_X_STEP_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:898:15: anm: i expansionen av makrot "X_STEP_PIN"
WRITE(X_STEP_PIN,LOW);
^
/tmp/arduino_build_147243/sketch/pins.h:47:36: fel: att sätta ihop "/* PINF.0, 97, STP_DRV1*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_X_STEP_PIN 54 // PINF.0, 97, STP_DRV1
^
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:898:9: anm: i expansionen av makrot "WRITE"
WRITE(X_STEP_PIN,LOW);
^
/tmp/arduino_build_147243/sketch/pins.h:357:23: anm: i expansionen av makrot "ORIG_X_STEP_PIN"
#define X_STEP_PIN ORIG_X_STEP_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:898:15: anm: i expansionen av makrot "X_STEP_PIN"
WRITE(X_STEP_PIN,LOW);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:47:36: fel: att sätta ihop "/* PINF.0, 97, STP_DRV1*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_X_STEP_PIN 54 // PINF.0, 97, STP_DRV1
^
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:898:9: anm: i expansionen av makrot "WRITE"
WRITE(X_STEP_PIN,LOW);
^
/tmp/arduino_build_147243/sketch/pins.h:357:23: anm: i expansionen av makrot "ORIG_X_STEP_PIN"
#define X_STEP_PIN ORIG_X_STEP_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:898:15: anm: i expansionen av makrot "X_STEP_PIN"
WRITE(X_STEP_PIN,LOW);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:53:36: fel: att sätta ihop "/* PINF.6, 91, STP_DRV2*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Y_STEP_PIN 60 // PINF.6, 91, STP_DRV2
^
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:899:9: anm: i expansionen av makrot "WRITE"
WRITE(Y_STEP_PIN,LOW);
^
/tmp/arduino_build_147243/sketch/pins.h:363:23: anm: i expansionen av makrot "ORIG_Y_STEP_PIN"
#define Y_STEP_PIN ORIG_Y_STEP_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:899:15: anm: i expansionen av makrot "Y_STEP_PIN"
WRITE(Y_STEP_PIN,LOW);
^
/tmp/arduino_build_147243/sketch/pins.h:53:36: fel: att sätta ihop "/* PINF.6, 91, STP_DRV2*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Y_STEP_PIN 60 // PINF.6, 91, STP_DRV2
^
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:899:9: anm: i expansionen av makrot "WRITE"
WRITE(Y_STEP_PIN,LOW);
^
/tmp/arduino_build_147243/sketch/pins.h:363:23: anm: i expansionen av makrot "ORIG_Y_STEP_PIN"
#define Y_STEP_PIN ORIG_Y_STEP_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:899:15: anm: i expansionen av makrot "Y_STEP_PIN"
WRITE(Y_STEP_PIN,LOW);
^
/tmp/arduino_build_147243/sketch/pins.h:53:36: fel: att sätta ihop "/* PINF.6, 91, STP_DRV2*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Y_STEP_PIN 60 // PINF.6, 91, STP_DRV2
^
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:899:9: anm: i expansionen av makrot "WRITE"
WRITE(Y_STEP_PIN,LOW);
^
/tmp/arduino_build_147243/sketch/pins.h:363:23: anm: i expansionen av makrot "ORIG_Y_STEP_PIN"
#define Y_STEP_PIN ORIG_Y_STEP_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:899:15: anm: i expansionen av makrot "Y_STEP_PIN"
WRITE(Y_STEP_PIN,LOW);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:53:36: fel: att sätta ihop "/* PINF.6, 91, STP_DRV2*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Y_STEP_PIN 60 // PINF.6, 91, STP_DRV2
^
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:899:9: anm: i expansionen av makrot "WRITE"
WRITE(Y_STEP_PIN,LOW);
^
/tmp/arduino_build_147243/sketch/pins.h:363:23: anm: i expansionen av makrot "ORIG_Y_STEP_PIN"
#define Y_STEP_PIN ORIG_Y_STEP_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:899:15: anm: i expansionen av makrot "Y_STEP_PIN"
WRITE(Y_STEP_PIN,LOW);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:59:36: fel: att sätta ihop "/* PINL.3, 38, STP_DRV3*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_STEP_PIN 46 // PINL.3, 38, STP_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:900:9: anm: i expansionen av makrot "WRITE"
WRITE(Z_STEP_PIN,LOW);
^
/tmp/arduino_build_147243/sketch/pins.h:369:23: anm: i expansionen av makrot "ORIG_Z_STEP_PIN"
#define Z_STEP_PIN ORIG_Z_STEP_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:900:15: anm: i expansionen av makrot "Z_STEP_PIN"
WRITE(Z_STEP_PIN,LOW);
^
/tmp/arduino_build_147243/sketch/pins.h:59:36: fel: att sätta ihop "/* PINL.3, 38, STP_DRV3*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_STEP_PIN 46 // PINL.3, 38, STP_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:900:9: anm: i expansionen av makrot "WRITE"
WRITE(Z_STEP_PIN,LOW);
^
/tmp/arduino_build_147243/sketch/pins.h:369:23: anm: i expansionen av makrot "ORIG_Z_STEP_PIN"
#define Z_STEP_PIN ORIG_Z_STEP_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:900:15: anm: i expansionen av makrot "Z_STEP_PIN"
WRITE(Z_STEP_PIN,LOW);
^
/tmp/arduino_build_147243/sketch/pins.h:59:36: fel: att sätta ihop "/* PINL.3, 38, STP_DRV3*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_STEP_PIN 46 // PINL.3, 38, STP_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:900:9: anm: i expansionen av makrot "WRITE"
WRITE(Z_STEP_PIN,LOW);
^
/tmp/arduino_build_147243/sketch/pins.h:369:23: anm: i expansionen av makrot "ORIG_Z_STEP_PIN"
#define Z_STEP_PIN ORIG_Z_STEP_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:900:15: anm: i expansionen av makrot "Z_STEP_PIN"
WRITE(Z_STEP_PIN,LOW);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:59:36: fel: att sätta ihop "/* PINL.3, 38, STP_DRV3*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_STEP_PIN 46 // PINL.3, 38, STP_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/Printer.h:900:9: anm: i expansionen av makrot "WRITE"
WRITE(Z_STEP_PIN,LOW);
^
/tmp/arduino_build_147243/sketch/pins.h:369:23: anm: i expansionen av makrot "ORIG_Z_STEP_PIN"
#define Z_STEP_PIN ORIG_Z_STEP_PIN
^
/tmp/arduino_build_147243/sketch/Printer.h:900:15: anm: i expansionen av makrot "Z_STEP_PIN"
WRITE(Z_STEP_PIN,LOW);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:47:36: fel: att sätta ihop "/* PINF.0, 97, STP_DRV1*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_X_STEP_PIN 54 // PINF.0, 97, STP_DRV1
^
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/motion.h:445:9: anm: i expansionen av makrot "WRITE"
WRITE(X_STEP_PIN,HIGH);
^
/tmp/arduino_build_147243/sketch/pins.h:357:23: anm: i expansionen av makrot "ORIG_X_STEP_PIN"
#define X_STEP_PIN ORIG_X_STEP_PIN
^
/tmp/arduino_build_147243/sketch/motion.h:445:15: anm: i expansionen av makrot "X_STEP_PIN"
WRITE(X_STEP_PIN,HIGH);
^
/tmp/arduino_build_147243/sketch/pins.h:47:36: fel: att sätta ihop "/* PINF.0, 97, STP_DRV1*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_X_STEP_PIN 54 // PINF.0, 97, STP_DRV1
^
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/motion.h:445:9: anm: i expansionen av makrot "WRITE"
WRITE(X_STEP_PIN,HIGH);
^
/tmp/arduino_build_147243/sketch/pins.h:357:23: anm: i expansionen av makrot "ORIG_X_STEP_PIN"
#define X_STEP_PIN ORIG_X_STEP_PIN
^
/tmp/arduino_build_147243/sketch/motion.h:445:15: anm: i expansionen av makrot "X_STEP_PIN"
WRITE(X_STEP_PIN,HIGH);
^
/tmp/arduino_build_147243/sketch/pins.h:47:36: fel: att sätta ihop "/* PINF.0, 97, STP_DRV1*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_X_STEP_PIN 54 // PINF.0, 97, STP_DRV1
^
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/motion.h:445:9: anm: i expansionen av makrot "WRITE"
WRITE(X_STEP_PIN,HIGH);
^
/tmp/arduino_build_147243/sketch/pins.h:357:23: anm: i expansionen av makrot "ORIG_X_STEP_PIN"
#define X_STEP_PIN ORIG_X_STEP_PIN
^
/tmp/arduino_build_147243/sketch/motion.h:445:15: anm: i expansionen av makrot "X_STEP_PIN"
WRITE(X_STEP_PIN,HIGH);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:47:36: fel: att sätta ihop "/* PINF.0, 97, STP_DRV1*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_X_STEP_PIN 54 // PINF.0, 97, STP_DRV1
^
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/motion.h:445:9: anm: i expansionen av makrot "WRITE"
WRITE(X_STEP_PIN,HIGH);
^
/tmp/arduino_build_147243/sketch/pins.h:357:23: anm: i expansionen av makrot "ORIG_X_STEP_PIN"
#define X_STEP_PIN ORIG_X_STEP_PIN
^
/tmp/arduino_build_147243/sketch/motion.h:445:15: anm: i expansionen av makrot "X_STEP_PIN"
WRITE(X_STEP_PIN,HIGH);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:53:36: fel: att sätta ihop "/* PINF.6, 91, STP_DRV2*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Y_STEP_PIN 60 // PINF.6, 91, STP_DRV2
^
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/motion.h:461:9: anm: i expansionen av makrot "WRITE"
WRITE(Y_STEP_PIN,HIGH);
^
/tmp/arduino_build_147243/sketch/pins.h:363:23: anm: i expansionen av makrot "ORIG_Y_STEP_PIN"
#define Y_STEP_PIN ORIG_Y_STEP_PIN
^
/tmp/arduino_build_147243/sketch/motion.h:461:15: anm: i expansionen av makrot "Y_STEP_PIN"
WRITE(Y_STEP_PIN,HIGH);
^
/tmp/arduino_build_147243/sketch/pins.h:53:36: fel: att sätta ihop "/* PINF.6, 91, STP_DRV2*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Y_STEP_PIN 60 // PINF.6, 91, STP_DRV2
^
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/motion.h:461:9: anm: i expansionen av makrot "WRITE"
WRITE(Y_STEP_PIN,HIGH);
^
/tmp/arduino_build_147243/sketch/pins.h:363:23: anm: i expansionen av makrot "ORIG_Y_STEP_PIN"
#define Y_STEP_PIN ORIG_Y_STEP_PIN
^
/tmp/arduino_build_147243/sketch/motion.h:461:15: anm: i expansionen av makrot "Y_STEP_PIN"
WRITE(Y_STEP_PIN,HIGH);
^
/tmp/arduino_build_147243/sketch/pins.h:53:36: fel: att sätta ihop "/* PINF.6, 91, STP_DRV2*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Y_STEP_PIN 60 // PINF.6, 91, STP_DRV2
^
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/motion.h:461:9: anm: i expansionen av makrot "WRITE"
WRITE(Y_STEP_PIN,HIGH);
^
/tmp/arduino_build_147243/sketch/pins.h:363:23: anm: i expansionen av makrot "ORIG_Y_STEP_PIN"
#define Y_STEP_PIN ORIG_Y_STEP_PIN
^
/tmp/arduino_build_147243/sketch/motion.h:461:15: anm: i expansionen av makrot "Y_STEP_PIN"
WRITE(Y_STEP_PIN,HIGH);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:53:36: fel: att sätta ihop "/* PINF.6, 91, STP_DRV2*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Y_STEP_PIN 60 // PINF.6, 91, STP_DRV2
^
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/motion.h:461:9: anm: i expansionen av makrot "WRITE"
WRITE(Y_STEP_PIN,HIGH);
^
/tmp/arduino_build_147243/sketch/pins.h:363:23: anm: i expansionen av makrot "ORIG_Y_STEP_PIN"
#define Y_STEP_PIN ORIG_Y_STEP_PIN
^
/tmp/arduino_build_147243/sketch/motion.h:461:15: anm: i expansionen av makrot "Y_STEP_PIN"
WRITE(Y_STEP_PIN,HIGH);
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/* PINL.1, 36, DIR_DRV3*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/motion.h:628:2: anm: i expansionen av makrot "WRITE"
WRITE( Z_DIR_PIN, INVERT_Z_DIR );
^
/tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
#define Z_DIR_PIN ORIG_Z_DIR_PIN
^
/tmp/arduino_build_147243/sketch/motion.h:628:9: anm: i expansionen av makrot "Z_DIR_PIN"
WRITE( Z_DIR_PIN, INVERT_Z_DIR );
^
/tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/* PINL.1, 36, DIR_DRV3*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/motion.h:628:2: anm: i expansionen av makrot "WRITE"
WRITE( Z_DIR_PIN, INVERT_Z_DIR );
^
/tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
#define Z_DIR_PIN ORIG_Z_DIR_PIN
^
/tmp/arduino_build_147243/sketch/motion.h:628:9: anm: i expansionen av makrot "Z_DIR_PIN"
WRITE( Z_DIR_PIN, INVERT_Z_DIR );
^
/tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/* PINL.1, 36, DIR_DRV3*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/motion.h:628:2: anm: i expansionen av makrot "WRITE"
WRITE( Z_DIR_PIN, INVERT_Z_DIR );
^
/tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
#define Z_DIR_PIN ORIG_Z_DIR_PIN
^
/tmp/arduino_build_147243/sketch/motion.h:628:9: anm: i expansionen av makrot "Z_DIR_PIN"
WRITE( Z_DIR_PIN, INVERT_Z_DIR );
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/* PINL.1, 36, DIR_DRV3*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/motion.h:628:2: anm: i expansionen av makrot "WRITE"
WRITE( Z_DIR_PIN, INVERT_Z_DIR );
^
/tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
#define Z_DIR_PIN ORIG_Z_DIR_PIN
^
/tmp/arduino_build_147243/sketch/motion.h:628:9: anm: i expansionen av makrot "Z_DIR_PIN"
WRITE( Z_DIR_PIN, INVERT_Z_DIR );
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/* PINL.1, 36, DIR_DRV3*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/motion.h:643:2: anm: i expansionen av makrot "WRITE"
WRITE( Z_DIR_PIN, !INVERT_Z_DIR );
^
/tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
#define Z_DIR_PIN ORIG_Z_DIR_PIN
^
/tmp/arduino_build_147243/sketch/motion.h:643:9: anm: i expansionen av makrot "Z_DIR_PIN"
WRITE( Z_DIR_PIN, !INVERT_Z_DIR );
^
/tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/* PINL.1, 36, DIR_DRV3*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/motion.h:643:2: anm: i expansionen av makrot "WRITE"
WRITE( Z_DIR_PIN, !INVERT_Z_DIR );
^
/tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
#define Z_DIR_PIN ORIG_Z_DIR_PIN
^
/tmp/arduino_build_147243/sketch/motion.h:643:9: anm: i expansionen av makrot "Z_DIR_PIN"
WRITE( Z_DIR_PIN, !INVERT_Z_DIR );
^
/tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/* PINL.1, 36, DIR_DRV3*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/motion.h:643:2: anm: i expansionen av makrot "WRITE"
WRITE( Z_DIR_PIN, !INVERT_Z_DIR );
^
/tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
#define Z_DIR_PIN ORIG_Z_DIR_PIN
^
/tmp/arduino_build_147243/sketch/motion.h:643:9: anm: i expansionen av makrot "Z_DIR_PIN"
WRITE( Z_DIR_PIN, !INVERT_Z_DIR );
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/* PINL.1, 36, DIR_DRV3*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/motion.h:643:2: anm: i expansionen av makrot "WRITE"
WRITE( Z_DIR_PIN, !INVERT_Z_DIR );
^
/tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
#define Z_DIR_PIN ORIG_Z_DIR_PIN
^
/tmp/arduino_build_147243/sketch/motion.h:643:9: anm: i expansionen av makrot "Z_DIR_PIN"
WRITE( Z_DIR_PIN, !INVERT_Z_DIR );
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:59:36: fel: att sätta ihop "/* PINL.3, 38, STP_DRV3*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_STEP_PIN 46 // PINL.3, 38, STP_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/motion.h:658:5: anm: i expansionen av makrot "WRITE"
WRITE( Z_STEP_PIN,HIGH );
^
/tmp/arduino_build_147243/sketch/pins.h:369:23: anm: i expansionen av makrot "ORIG_Z_STEP_PIN"
#define Z_STEP_PIN ORIG_Z_STEP_PIN
^
/tmp/arduino_build_147243/sketch/motion.h:658:12: anm: i expansionen av makrot "Z_STEP_PIN"
WRITE( Z_STEP_PIN,HIGH );
^
/tmp/arduino_build_147243/sketch/pins.h:59:36: fel: att sätta ihop "/* PINL.3, 38, STP_DRV3*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_STEP_PIN 46 // PINL.3, 38, STP_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/motion.h:658:5: anm: i expansionen av makrot "WRITE"
WRITE( Z_STEP_PIN,HIGH );
^
/tmp/arduino_build_147243/sketch/pins.h:369:23: anm: i expansionen av makrot "ORIG_Z_STEP_PIN"
#define Z_STEP_PIN ORIG_Z_STEP_PIN
^
/tmp/arduino_build_147243/sketch/motion.h:658:12: anm: i expansionen av makrot "Z_STEP_PIN"
WRITE( Z_STEP_PIN,HIGH );
^
/tmp/arduino_build_147243/sketch/pins.h:59:36: fel: att sätta ihop "/* PINL.3, 38, STP_DRV3*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_STEP_PIN 46 // PINL.3, 38, STP_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/motion.h:658:5: anm: i expansionen av makrot "WRITE"
WRITE( Z_STEP_PIN,HIGH );
^
/tmp/arduino_build_147243/sketch/pins.h:369:23: anm: i expansionen av makrot "ORIG_Z_STEP_PIN"
#define Z_STEP_PIN ORIG_Z_STEP_PIN
^
/tmp/arduino_build_147243/sketch/motion.h:658:12: anm: i expansionen av makrot "Z_STEP_PIN"
WRITE( Z_STEP_PIN,HIGH );
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:59:36: fel: att sätta ihop "/* PINL.3, 38, STP_DRV3*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_STEP_PIN 46 // PINL.3, 38, STP_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/motion.h:658:5: anm: i expansionen av makrot "WRITE"
WRITE( Z_STEP_PIN,HIGH );
^
/tmp/arduino_build_147243/sketch/pins.h:369:23: anm: i expansionen av makrot "ORIG_Z_STEP_PIN"
#define Z_STEP_PIN ORIG_Z_STEP_PIN
^
/tmp/arduino_build_147243/sketch/motion.h:658:12: anm: i expansionen av makrot "Z_STEP_PIN"
WRITE( Z_STEP_PIN,HIGH );
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:59:36: fel: att sätta ihop "/* PINL.3, 38, STP_DRV3*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_STEP_PIN 46 // PINL.3, 38, STP_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/motion.h:673:5: anm: i expansionen av makrot "WRITE"
WRITE( Z_STEP_PIN, LOW );
^
/tmp/arduino_build_147243/sketch/pins.h:369:23: anm: i expansionen av makrot "ORIG_Z_STEP_PIN"
#define Z_STEP_PIN ORIG_Z_STEP_PIN
^
/tmp/arduino_build_147243/sketch/motion.h:673:12: anm: i expansionen av makrot "Z_STEP_PIN"
WRITE( Z_STEP_PIN, LOW );
^
/tmp/arduino_build_147243/sketch/pins.h:59:36: fel: att sätta ihop "/* PINL.3, 38, STP_DRV3*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_STEP_PIN 46 // PINL.3, 38, STP_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/motion.h:673:5: anm: i expansionen av makrot "WRITE"
WRITE( Z_STEP_PIN, LOW );
^
/tmp/arduino_build_147243/sketch/pins.h:369:23: anm: i expansionen av makrot "ORIG_Z_STEP_PIN"
#define Z_STEP_PIN ORIG_Z_STEP_PIN
^
/tmp/arduino_build_147243/sketch/motion.h:673:12: anm: i expansionen av makrot "Z_STEP_PIN"
WRITE( Z_STEP_PIN, LOW );
^
/tmp/arduino_build_147243/sketch/pins.h:59:36: fel: att sätta ihop "/* PINL.3, 38, STP_DRV3*/" och "_WPORT" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_STEP_PIN 46 // PINL.3, 38, STP_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/motion.h:673:5: anm: i expansionen av makrot "WRITE"
WRITE( Z_STEP_PIN, LOW );
^
/tmp/arduino_build_147243/sketch/pins.h:369:23: anm: i expansionen av makrot "ORIG_Z_STEP_PIN"
#define Z_STEP_PIN ORIG_Z_STEP_PIN
^
/tmp/arduino_build_147243/sketch/motion.h:673:12: anm: i expansionen av makrot "Z_STEP_PIN"
WRITE( Z_STEP_PIN, LOW );
^
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0,
from /tmp/arduino_build_147243/sketch/Repetier.h:36,
from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112:
/tmp/arduino_build_147243/sketch/pins.h:59:36: fel: att sätta ihop "/* PINL.3, 38, STP_DRV3*/" och "_PIN" ger inte en giltigt preprocessorsymbol
#define ORIG_Z_STEP_PIN 46 // PINL.3, 38, STP_DRV3
^
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
^
/tmp/arduino_build_147243/sketch/motion.h:673:5: anm: i expansionen av makrot "WRITE"
WRITE( Z_STEP_PIN, LOW );
^
/tmp/arduino_build_147243/sketch/pins.h:369:23: anm: i expansionen av makrot "ORIG_Z_STEP_PIN"
#define Z_STEP_PIN ORIG_Z_STEP_PIN
^
/tmp/arduino_build_147243/sketch/motion.h:673:12: anm: i expansionen av makrot "Z_STEP_PIN"
WRITE( Z_STEP_PIN, LOW );
^
Using library SPI at version 1.0 in folder: /usr/local/arduino/hardware/arduino/avr/libraries/SPI
Using library Wire at version 1.0 in folder: /usr/local/arduino/hardware/arduino/avr/libraries/Wire
exit status 1
Error compiling for board Arduino/Genuino Mega or Mega 2560.