【增加】lts v3.1.3 版本

Signed-off-by: armink <[email protected]>

Author: armink

.travis.yml

@@ -30,7 +30,6 @@ env:
   - RTT_BSP='efm32' RTT_TOOL_CHAIN='sourcery-arm'
 #  - RTT_BSP='es32f0334' RTT_TOOL_CHAIN='sourcery-arm' # not support gcc
 #  - RTT_BSP='es32f0654' RTT_TOOL_CHAIN='sourcery-arm' # not support gcc
-  - RTT_BSP='gd32e230k-start' RTT_TOOL_CHAIN='sourcery-arm'
   - RTT_BSP='gd32303e-eval' RTT_TOOL_CHAIN='sourcery-arm'
   - RTT_BSP='gd32450z-eval' RTT_TOOL_CHAIN='sourcery-arm'
   - RTT_BSP='gkipc' RTT_TOOL_CHAIN='sourcery-arm'
@@ -46,7 +45,6 @@ env:
   - RTT_BSP='lpc176x' RTT_TOOL_CHAIN='sourcery-arm'
   - RTT_BSP='lpc178x' RTT_TOOL_CHAIN='sourcery-arm'
   - RTT_BSP='lpc408x' RTT_TOOL_CHAIN='sourcery-arm'
-  - RTT_BSP='lpc1114' RTT_TOOL_CHAIN='sourcery-arm'
 #  - RTT_BSP='lpc824' RTT_TOOL_CHAIN='sourcery-arm' # not support gcc
   - RTT_BSP='lpc2148' RTT_TOOL_CHAIN='sourcery-arm'
   - RTT_BSP='lpc2478' RTT_TOOL_CHAIN='sourcery-arm'

ChangeLog.md

@@ -8,8 +8,6 @@
 #
 CONFIG_RT_NAME_MAX=8
 # CONFIG_RT_USING_ARCH_DATA_TYPE is not set
-CONFIG_RT_USING_SMP=y
-CONFIG_RT_CPUS_NR=2
 CONFIG_RT_ALIGN_SIZE=4
 # CONFIG_RT_THREAD_PRIORITY_8 is not set
 CONFIG_RT_THREAD_PRIORITY_32=y
@@ -68,7 +66,7 @@ CONFIG_RT_USING_INTERRUPT_INFO=y
 CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=256
 CONFIG_RT_CONSOLE_DEVICE_NAME="uart0"
-CONFIG_RT_VER_NUM=0x40002
+CONFIG_RT_VER_NUM=0x30104
 CONFIG_ARCH_ARM=y
 # CONFIG_RT_USING_CPU_FFS is not set
 CONFIG_ARCH_ARM_CORTEX_A=y
@@ -155,14 +153,15 @@ CONFIG_RT_SERIAL_RB_BUFSZ=64
 # CONFIG_RT_USING_HWTIMER is not set
 # CONFIG_RT_USING_CPUTIME is not set
 CONFIG_RT_USING_I2C=y
+# CONFIG_RT_I2C_DEBUG is not set
 CONFIG_RT_USING_I2C_BITOPS=y
+# CONFIG_RT_I2C_BITOPS_DEBUG is not set
 CONFIG_RT_USING_PIN=y
 # CONFIG_RT_USING_ADC is not set
 # CONFIG_RT_USING_PWM is not set
 CONFIG_RT_USING_MTD_NOR=y
 CONFIG_RT_USING_MTD_NAND=y
 CONFIG_RT_MTD_NAND_DEBUG=y
-# CONFIG_RT_USING_MTD is not set
 # CONFIG_RT_USING_PM is not set
 CONFIG_RT_USING_RTC=y
 # CONFIG_RT_USING_ALARM is not set
@@ -181,22 +180,17 @@ CONFIG_RT_USING_SFUD=y
 CONFIG_RT_SFUD_USING_SFDP=y
 CONFIG_RT_SFUD_USING_FLASH_INFO_TABLE=y
 # CONFIG_RT_SFUD_USING_QSPI is not set
+CONFIG_RT_SFUD_SPI_MAX_HZ=50000000
 # CONFIG_RT_DEBUG_SFUD is not set
 # CONFIG_RT_USING_ENC28J60 is not set
 # CONFIG_RT_USING_SPI_WIFI is not set
 CONFIG_RT_USING_WDT=y
 # CONFIG_RT_USING_AUDIO is not set
 # CONFIG_RT_USING_SENSOR is not set
 # CONFIG_RT_USING_TOUCH is not set
-
-#
-# Using Hardware Crypto drivers
-#
 # CONFIG_RT_USING_HWCRYPTO is not set
-
-#
-# Using WiFi
-#
+# CONFIG_RT_USING_PULSE_ENCODER is not set
+# CONFIG_RT_USING_INPUT_CAPTURE is not set
 # CONFIG_RT_USING_WIFI is not set
 
 #
@@ -301,11 +295,6 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
 CONFIG_RT_LWIP_USING_PING=y
 # CONFIG_RT_LWIP_DEBUG is not set
 
-#
-# Modbus master and slave stack
-#
-# CONFIG_RT_USING_MODBUS is not set
-
 #
 # AT commands
 #
@@ -323,7 +312,6 @@ CONFIG_RT_LWIP_USING_PING=y
 # CONFIG_RT_USING_RYM is not set
 # CONFIG_RT_USING_ULOG is not set
 # CONFIG_RT_USING_UTEST is not set
-CONFIG_RT_USING_LWP=y
 
 #
 # RT-Thread online packages
@@ -336,10 +324,12 @@ CONFIG_RT_USING_LWP=y
 # CONFIG_PKG_USING_WEBCLIENT is not set
 # CONFIG_PKG_USING_WEBNET is not set
 # CONFIG_PKG_USING_MONGOOSE is not set
+# CONFIG_PKG_USING_MYMQTT is not set
 # CONFIG_PKG_USING_WEBTERMINAL is not set
 # CONFIG_PKG_USING_CJSON is not set
 # CONFIG_PKG_USING_JSMN is not set
 # CONFIG_PKG_USING_LIBMODBUS is not set
+# CONFIG_PKG_USING_FREEMODBUS is not set
 # CONFIG_PKG_USING_LJSON is not set
 # CONFIG_PKG_USING_EZXML is not set
 # CONFIG_PKG_USING_NANOPB is not set
@@ -361,6 +351,7 @@ CONFIG_RT_USING_LWP=y
 # CONFIG_PKG_USING_COAP is not set
 # CONFIG_PKG_USING_NOPOLL is not set
 # CONFIG_PKG_USING_NETUTILS is not set
+# CONFIG_PKG_USING_PPP_DEVICE is not set
 # CONFIG_PKG_USING_AT_DEVICE is not set
 # CONFIG_PKG_USING_ATSRV_SOCKET is not set
 # CONFIG_PKG_USING_WIZNET is not set
@@ -373,12 +364,21 @@ CONFIG_RT_USING_LWP=y
 # CONFIG_PKG_USING_ALI_IOTKIT is not set
 # CONFIG_PKG_USING_AZURE is not set
 # CONFIG_PKG_USING_TENCENT_IOTHUB is not set
+# CONFIG_PKG_USING_JIOT-C-SDK is not set
 # CONFIG_PKG_USING_NIMBLE is not set
 # CONFIG_PKG_USING_OTA_DOWNLOADER is not set
 # CONFIG_PKG_USING_IPMSG is not set
 # CONFIG_PKG_USING_LSSDP is not set
 # CONFIG_PKG_USING_AIRKISS_OPEN is not set
 # CONFIG_PKG_USING_LIBRWS is not set
+# CONFIG_PKG_USING_TCPSERVER is not set
+# CONFIG_PKG_USING_PROTOBUF_C is not set
+# CONFIG_PKG_USING_ONNX_PARSER is not set
+# CONFIG_PKG_USING_ONNX_BACKEND is not set
+# CONFIG_PKG_USING_DLT645 is not set
+# CONFIG_PKG_USING_QXWZ is not set
+# CONFIG_PKG_USING_SMTP_CLIENT is not set
+# CONFIG_PKG_USING_ABUP_FOTA is not set
 
 #
 # security packages
@@ -400,6 +400,8 @@ CONFIG_RT_USING_LWP=y
 # CONFIG_PKG_USING_OPENMV is not set
 # CONFIG_PKG_USING_MUPDF is not set
 # CONFIG_PKG_USING_STEMWIN is not set
+# CONFIG_PKG_USING_WAVPLAYER is not set
+# CONFIG_PKG_USING_TJPGD is not set
 
 #
 # tools packages
@@ -412,6 +414,12 @@ CONFIG_RT_USING_LWP=y
 # CONFIG_PKG_USING_QRCODE is not set
 # CONFIG_PKG_USING_ULOG_EASYFLASH is not set
 # CONFIG_PKG_USING_ADBD is not set
+# CONFIG_PKG_USING_COREMARK is not set
+# CONFIG_PKG_USING_DHRYSTONE is not set
+# CONFIG_PKG_USING_NR_MICRO_SHELL is not set
+# CONFIG_PKG_USING_CHINESE_FONT_LIBRARY is not set
+# CONFIG_PKG_USING_LUNAR_CALENDAR is not set
+# CONFIG_PKG_USING_BS8116A is not set
 
 #
 # system packages
@@ -430,13 +438,16 @@ CONFIG_RT_USING_LWP=y
 # CONFIG_PKG_USING_DFS_YAFFS is not set
 # CONFIG_PKG_USING_LITTLEFS is not set
 # CONFIG_PKG_USING_THREAD_POOL is not set
+# CONFIG_PKG_USING_ROBOTS is not set
+# CONFIG_PKG_USING_EV is not set
 
 #
 # peripheral libraries and drivers
 #
 # CONFIG_PKG_USING_SENSORS_DRIVERS is not set
 # CONFIG_PKG_USING_REALTEK_AMEBA is not set
 # CONFIG_PKG_USING_SHT2X is not set
+# CONFIG_PKG_USING_SHT3X is not set
 # CONFIG_PKG_USING_STM32_SDIO is not set
 # CONFIG_PKG_USING_ICM20608 is not set
 # CONFIG_PKG_USING_U8G2 is not set
@@ -449,13 +460,18 @@ CONFIG_RT_USING_LWP=y
 # CONFIG_PKG_USING_KENDRYTE_SDK is not set
 # CONFIG_PKG_USING_INFRARED is not set
 # CONFIG_PKG_USING_ROSSERIAL is not set
+# CONFIG_PKG_USING_AGILE_BUTTON is not set
+# CONFIG_PKG_USING_AGILE_LED is not set
 # CONFIG_PKG_USING_AT24CXX is not set
 # CONFIG_PKG_USING_MOTIONDRIVER2RTT is not set
 # CONFIG_PKG_USING_AD7746 is not set
 # CONFIG_PKG_USING_PCA9685 is not set
 # CONFIG_PKG_USING_I2C_TOOLS is not set
 # CONFIG_PKG_USING_NRF24L01 is not set
 # CONFIG_PKG_USING_TOUCH_DRIVERS is not set
+# CONFIG_PKG_USING_MAX17048 is not set
+# CONFIG_PKG_USING_RPLIDAR is not set
+# CONFIG_PKG_USING_AS608 is not set
 
 #
 # miscellaneous packages
@@ -466,12 +482,15 @@ CONFIG_RT_USING_LWP=y
 # CONFIG_PKG_USING_MINILZO is not set
 # CONFIG_PKG_USING_QUICKLZ is not set
 # CONFIG_PKG_USING_MULTIBUTTON is not set
+# CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set
 # CONFIG_PKG_USING_CANFESTIVAL is not set
 # CONFIG_PKG_USING_ZLIB is not set
 # CONFIG_PKG_USING_DSTR is not set
 # CONFIG_PKG_USING_TINYFRAME is not set
 # CONFIG_PKG_USING_KENDRYTE_DEMO is not set
 # CONFIG_PKG_USING_DIGITALCTRL is not set
+# CONFIG_PKG_USING_UPACKER is not set
+# CONFIG_PKG_USING_UPARAM is not set
 
 #
 # samples: kernel and components samples
@@ -483,6 +502,12 @@ CONFIG_RT_USING_LWP=y
 # CONFIG_PKG_USING_HELLO is not set
 # CONFIG_PKG_USING_VI is not set
 # CONFIG_PKG_USING_NNOM is not set
+# CONFIG_PKG_USING_LIBANN is not set
+# CONFIG_PKG_USING_ELAPACK is not set
+# CONFIG_PKG_USING_ARMv7M_DWT is not set
+# CONFIG_PKG_USING_VT100 is not set
+# CONFIG_PKG_USING_ULAPACK is not set
+# CONFIG_PKG_USING_UKAL is not set
 CONFIG_SOC_VEXPRESS_A9=y
 CONFIG_RT_USING_UART0=y
 CONFIG_RT_USING_UART1=y

bsp/qemu-vexpress-a9/.config

@@ -2,5 +2,5 @@ if [ ! -f "sd.bin" ]; then
 dd if=/dev/zero of=sd.bin bs=1024 count=65536
 fi
 
-qemu-system-arm -M vexpress-a9 -smp cpus=2 -kernel rtthread.bin -nographic -sd sd.bin -net nic -net tap
+qemu-system-arm -M vexpress-a9 -kernel rtthread.elf -nographic -sd sd.bin -net nic -net tap
 

bsp/qemu-vexpress-a9/qemu-nographic.sh

@@ -3,4 +3,4 @@ if exist sd.bin goto run
 qemu-img create -f raw sd.bin 64M
 
 :run
-qemu-system-arm -M vexpress-a9 -smp cpus=2 -kernel rtthread.bin -serial stdio -sd sd.bin
+qemu-system-arm -M vexpress-a9 -kernel rtthread.elf -serial stdio -sd sd.bin

bsp/qemu-vexpress-a9/qemu.bat

@@ -2,4 +2,4 @@ if [ ! -f "sd.bin" ]; then
 dd if=/dev/zero of=sd.bin bs=1024 count=65536
 fi
 
-qemu-system-arm -M vexpress-a9 -smp cpus=2 -kernel rtthread.bin -serial stdio -sd sd.bin
+qemu-system-arm -M vexpress-a9 -kernel rtthread.elf -serial stdio -sd sd.bin

bsp/qemu-vexpress-a9/qemu.sh

@@ -7,8 +7,6 @@
 /* RT-Thread Kernel */
 
 #define RT_NAME_MAX 8
-#define RT_USING_SMP
-#define RT_CPUS_NR 2
 #define RT_ALIGN_SIZE 4
 #define RT_THREAD_PRIORITY_32
 #define RT_THREAD_PRIORITY_MAX 32
@@ -49,7 +47,7 @@
 #define RT_USING_CONSOLE
 #define RT_CONSOLEBUF_SIZE 256
 #define RT_CONSOLE_DEVICE_NAME "uart0"
-#define RT_VER_NUM 0x40002
+#define RT_VER_NUM 0x30104
 #define ARCH_ARM
 #define ARCH_ARM_CORTEX_A
 #define ARCH_ARM_CORTEX_A9
@@ -132,14 +130,9 @@
 #define RT_USING_SFUD
 #define RT_SFUD_USING_SFDP
 #define RT_SFUD_USING_FLASH_INFO_TABLE
+#define RT_SFUD_SPI_MAX_HZ 50000000
 #define RT_USING_WDT
 
-/* Using Hardware Crypto drivers */
-
-
-/* Using WiFi */
-
-
 /* Using USB */
 
 
@@ -216,17 +209,14 @@
 #define LWIP_NETIF_LOOPBACK 0
 #define RT_LWIP_USING_PING
 
-/* Modbus master and slave stack */
-
-
 /* AT commands */
 
 
 /* VBUS(Virtual Software BUS) */
 
 
 /* Utilities */
-#define RT_USING_LWP
+
 
 /* RT-Thread online packages */