Merge pull request #3956 from xfwangqiang/gcc-fix

[Components]&&[BSP][imxrt]add ethernet configuration for imxrt1064-nxp-evk

Author: BernardXiong

bsp/imxrt/imxrt1052-nxp-evk/.config

@@ -7,6 +7,7 @@
 # RT-Thread Kernel
 #
 CONFIG_RT_NAME_MAX=8
+# CONFIG_RT_USING_ARCH_DATA_TYPE is not set
 # CONFIG_RT_USING_SMP is not set
 CONFIG_RT_ALIGN_SIZE=4
 # CONFIG_RT_THREAD_PRIORITY_8 is not set
@@ -63,7 +64,8 @@ CONFIG_RT_USING_DEVICE=y
 CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=128
 CONFIG_RT_CONSOLE_DEVICE_NAME="uart1"
-CONFIG_RT_VER_NUM=0x40001
+CONFIG_RT_VER_NUM=0x40003
+# CONFIG_RT_USING_CPU_FFS is not set
 # CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set
 
 #
@@ -108,30 +110,32 @@ CONFIG_FINSH_ARG_MAX=10
 #
 CONFIG_RT_USING_DEVICE_IPC=y
 CONFIG_RT_PIPE_BUFSZ=512
+# CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set
 CONFIG_RT_USING_SERIAL=y
 # CONFIG_RT_SERIAL_USING_DMA is not set
 CONFIG_RT_SERIAL_RB_BUFSZ=64
 # CONFIG_RT_USING_CAN is not set
 # CONFIG_RT_USING_HWTIMER is not set
 CONFIG_RT_USING_CPUTIME=y
 # CONFIG_RT_USING_I2C is not set
+CONFIG_RT_USING_PHY=y
 CONFIG_RT_USING_PIN=y
 # CONFIG_RT_USING_ADC is not set
+# CONFIG_RT_USING_DAC is not set
 # CONFIG_RT_USING_PWM is not set
 # CONFIG_RT_USING_MTD_NOR is not set
 # CONFIG_RT_USING_MTD_NAND is not set
-# CONFIG_RT_USING_MTD is not set
 # CONFIG_RT_USING_PM is not set
 # CONFIG_RT_USING_RTC is not set
 # CONFIG_RT_USING_SDIO is not set
 # CONFIG_RT_USING_SPI is not set
 # CONFIG_RT_USING_WDT is not set
 # CONFIG_RT_USING_AUDIO is not set
 # CONFIG_RT_USING_SENSOR is not set
-
-#
-# Using WiFi
-#
+# CONFIG_RT_USING_TOUCH is not set
+# CONFIG_RT_USING_HWCRYPTO is not set
+# CONFIG_RT_USING_PULSE_ENCODER is not set
+# CONFIG_RT_USING_INPUT_CAPTURE is not set
 # CONFIG_RT_USING_WIFI is not set
 
 #
@@ -145,6 +149,7 @@ CONFIG_RT_USING_PIN=y
 #
 CONFIG_RT_USING_LIBC=y
 # CONFIG_RT_USING_PTHREADS is not set
+# CONFIG_RT_USING_MODULE is not set
 
 #
 # Network
@@ -156,14 +161,25 @@ CONFIG_RT_USING_LIBC=y
 # CONFIG_RT_USING_SAL is not set
 
 #
-# light weight TCP/IP stack
+# Network interface device
 #
-# CONFIG_RT_USING_LWIP is not set
+CONFIG_RT_USING_NETDEV=y
+CONFIG_NETDEV_USING_IFCONFIG=y
+CONFIG_NETDEV_USING_PING=y
+CONFIG_NETDEV_USING_NETSTAT=y
+CONFIG_NETDEV_USING_AUTO_DEFAULT=y
+# CONFIG_NETDEV_USING_IPV6 is not set
+CONFIG_NETDEV_IPV4=1
+CONFIG_NETDEV_IPV6=0
+# CONFIG_NETDEV_IPV6_SCOPES is not set
 
 #
-# Modbus master and slave stack
+# light weight TCP/IP stack
 #
-# CONFIG_RT_USING_MODBUS is not set
+# CONFIG_RT_USING_LWIP is not set
+# CONFIG_RT_USING_LWIP141 is not set
+# CONFIG_RT_USING_LWIP202 is not set
+# CONFIG_RT_USING_LWIP212 is not set
 
 #
 # AT commands
@@ -178,7 +194,6 @@ CONFIG_RT_USING_LIBC=y
 #
 # Utilities
 #
-# CONFIG_RT_USING_LOGTRACE is not set
 # CONFIG_RT_USING_RYM is not set
 # CONFIG_RT_USING_ULOG is not set
 # CONFIG_RT_USING_UTEST is not set
@@ -230,13 +245,12 @@ CONFIG_RT_USING_LIBC=y
 # CONFIG_PKG_USING_GAGENT_CLOUD is not set
 # CONFIG_PKG_USING_ALI_IOTKIT is not set
 # CONFIG_PKG_USING_AZURE is not set
-# CONFIG_PKG_USING_TENCENT_IOTHUB is not set
+# CONFIG_PKG_USING_TENCENT_IOTKIT is not set
 # CONFIG_PKG_USING_NIMBLE is not set
 # CONFIG_PKG_USING_OTA_DOWNLOADER is not set
 # CONFIG_PKG_USING_IPMSG is not set
 # CONFIG_PKG_USING_LSSDP is not set
 # CONFIG_PKG_USING_AIRKISS_OPEN is not set
-# CONFIG_PKG_USING_LIBRWS is not set
 
 #
 # security packages
@@ -294,6 +308,7 @@ CONFIG_RT_USING_LIBC=y
 # CONFIG_PKG_USING_SENSORS_DRIVERS is not set
 # CONFIG_PKG_USING_REALTEK_AMEBA is not set
 # CONFIG_PKG_USING_SHT2X is not set
+# CONFIG_PKG_USING_AP3216C is not set
 # CONFIG_PKG_USING_STM32_SDIO is not set
 # CONFIG_PKG_USING_ICM20608 is not set
 # CONFIG_PKG_USING_U8G2 is not set
@@ -310,7 +325,6 @@ CONFIG_RT_USING_LIBC=y
 # CONFIG_PKG_USING_MOTIONDRIVER2RTT is not set
 # CONFIG_PKG_USING_AD7746 is not set
 # CONFIG_PKG_USING_PCA9685 is not set
-# CONFIG_PKG_USING_I2C_TOOLS is not set
 
 #
 # miscellaneous packages
@@ -354,10 +368,13 @@ CONFIG_BSP_USING_LPUART=y
 CONFIG_BSP_USING_LPUART1=y
 # CONFIG_BSP_LPUART1_RX_USING_DMA is not set
 # CONFIG_BSP_LPUART1_TX_USING_DMA is not set
+# CONFIG_BSP_USING_LPUART3 is not set
 
 #
 # Onboard Peripheral Drivers
 #
+# CONFIG_BSP_USING_SDRAM is not set
+# CONFIG_BSP_USING_ETH is not set
 
 #
 # Board extended module Drivers

bsp/imxrt/imxrt1052-nxp-evk/SConstruct

@@ -67,5 +67,8 @@ objs.extend(SConscript(os.path.join(libraries_path_prefix, imxrt_library, 'SCons
 # include drivers
 objs.extend(SConscript(os.path.join(libraries_path_prefix, 'drivers', 'SConscript')))
 
+# include peripherals
+objs.extend(SConscript(os.path.join(libraries_path_prefix, 'peripherals', 'SConscript')))
+
 # make a building
 DoBuilding(TARGET, objs)

bsp/imxrt/imxrt1052-nxp-evk/board/Kconfig

@@ -96,19 +96,41 @@ menu "Onboard Peripheral Drivers"
 
     menuconfig BSP_USING_ETH
 	bool "Enable Ethernet"
-	select PHY_USING_KSZ8081
 	select RT_USING_NETDEV
 	default n
+    
 
 	if BSP_USING_ETH
-		config PHY_USING_KSZ8081
-			bool "i.MX RT1050EVKB uses ksz8081 phy"
+		config BSP_USING_PHY
+            select RT_USING_PHY
+			bool "Enable ethernet phy"
 			default y
 
-			config FSL_FEATURE_PHYKSZ8081_USE_RMII50M_MODE
-				bool "Enable the PHY ksz8081 RMII50M mode"
-				depends on PHY_USING_KSZ8081
-				default y
+	    if BSP_USING_PHY
+            config PHY_DEVICE_ADDRESS
+                int "Specify address of phy device"
+                default 2
+
+            config PHY_USING_KSZ8081
+                bool "i.MX RT1064EVK uses ksz8081 phy"
+                default y
+
+            if PHY_USING_KSZ8081
+                config PHY_RESET_PORT
+                    int "indicate port of reset"
+                    default 1
+
+                config PHY_RESET_PIN
+                    int "indicate pin of reset"
+                    default 9
+                
+                config FSL_FEATURE_PHYKSZ8081_USE_RMII50M_MODE
+                    bool "Enable the PHY ksz8081 RMII50M mode"
+                    depends on PHY_USING_KSZ8081
+                    default y
+            endif
+
+        endif
 	endif
 endmenu
 

bsp/imxrt/imxrt1052-nxp-evk/board/SConscript

@@ -12,10 +12,6 @@ MCUX_Config/pin_mux.c
 CPPPATH = [cwd,cwd + '/MCUX_Config',cwd + '/ports']
 CPPDEFINES = ['CPU_MIMXRT1052DVL6B', 'SKIP_SYSCLK_INIT', 'EVK_MCIMXRM', 'FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL=1','XIP_EXTERNAL_FLASH=1']
 
-if GetDepend(['PHY_USING_KSZ8081']):
-    src += Glob('ports/phyksz8081/fsl_phy.c')
-    CPPPATH += [cwd + '/ports/phyksz8081']
-
 group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH, CPPDEFINES=CPPDEFINES)
 
 Return('group')