Merge pull request #4812 from rtthread-bot/rtt_bot

[update] RT-Thread Robot automatic submission

Author: Guozhanxin

bsp/essemi/es32f0654/.config

@@ -19,7 +19,7 @@ CONFIG_RT_USING_OVERFLOW_CHECK=y
 CONFIG_RT_USING_HOOK=y
 CONFIG_RT_USING_IDLE_HOOK=y
 CONFIG_RT_IDLE_HOOK_LIST_SIZE=4
-CONFIG_IDLE_THREAD_STACK_SIZE=256
+CONFIG_IDLE_THREAD_STACK_SIZE=512
 # CONFIG_RT_USING_TIMER_SOFT is not set
 CONFIG_RT_DEBUG=y
 CONFIG_RT_DEBUG_COLOR=y
@@ -114,26 +114,26 @@ CONFIG_RT_PIPE_BUFSZ=512
 CONFIG_RT_USING_SERIAL=y
 # CONFIG_RT_SERIAL_USING_DMA is not set
 CONFIG_RT_SERIAL_RB_BUFSZ=64
-CONFIG_RT_USING_CAN=y
+# CONFIG_RT_USING_CAN is not set
 # CONFIG_RT_CAN_USING_HDR is not set
-CONFIG_RT_USING_HWTIMER=y
+# CONFIG_RT_USING_HWTIMER is not set
 # CONFIG_RT_USING_CPUTIME is not set
-CONFIG_RT_USING_I2C=y
+# CONFIG_RT_USING_I2C is not set
 # CONFIG_RT_I2C_DEBUG is not set
-CONFIG_RT_USING_I2C_BITOPS=y
+# CONFIG_RT_USING_I2C_BITOPS is not set
 # CONFIG_RT_I2C_BITOPS_DEBUG is not set
 CONFIG_RT_USING_PIN=y
-CONFIG_RT_USING_ADC=y
+# CONFIG_RT_USING_ADC is not set
 # CONFIG_RT_USING_DAC is not set
-CONFIG_RT_USING_PWM=y
+# CONFIG_RT_USING_PWM is not set
 # CONFIG_RT_USING_MTD_NOR is not set
 # CONFIG_RT_USING_MTD_NAND is not set
-CONFIG_RT_USING_PM=y
-CONFIG_RT_USING_RTC=y
+# CONFIG_RT_USING_PM is not set
+# CONFIG_RT_USING_RTC is not set
 # CONFIG_RT_USING_ALARM is not set
 # CONFIG_RT_USING_SOFT_RTC is not set
 # CONFIG_RT_USING_SDIO is not set
-CONFIG_RT_USING_SPI=y
+# CONFIG_RT_USING_SPI is not set
 # CONFIG_RT_USING_QSPI is not set
 # CONFIG_RT_USING_SPI_MSD is not set
 # CONFIG_RT_USING_SFUD is not set
@@ -159,7 +159,8 @@ CONFIG_RT_USING_SPI=y
 #
 # CONFIG_RT_USING_LIBC is not set
 # CONFIG_RT_USING_PTHREADS is not set
-# CONFIG_RT_LIBC_USING_TIME is not set
+CONFIG_RT_LIBC_USING_TIME=y
+CONFIG_RT_LIBC_FIXED_TIMEZONE=8
 
 #
 # Network
@@ -468,6 +469,8 @@ CONFIG_BSP_USING_GPIO=y
 # CONFIG_BSP_USING_UART1 is not set
 CONFIG_BSP_USING_UART2=y
 # CONFIG_BSP_USING_UART3 is not set
+# CONFIG_BSP_USING_USART0 is not set
+# CONFIG_BSP_USING_USART1 is not set
 
 #
 # SPI Drivers
@@ -484,23 +487,26 @@ CONFIG_BSP_USING_UART2=y
 #
 # CAN Drivers
 #
-# CONFIG_BSP_USING_CAN is not set
+# CONFIG_BSP_USING_CAN0 is not set
 
 #
 # PWM Drivers
 #
-# CONFIG_BSP_USING_PWM0 is not set
-# CONFIG_BSP_USING_PWM1 is not set
-# CONFIG_BSP_USING_PWM2 is not set
-# CONFIG_BSP_USING_PWM3 is not set
+# CONFIG_BSP_USING_AD16C4T0_PWM is not set
+# CONFIG_BSP_USING_GP16C4T0_PWM is not set
+# CONFIG_BSP_USING_GP16C2T0_PWM is not set
+# CONFIG_BSP_USING_GP16C2T1_PWM is not set
 
 #
 # HWtimer Drivers
 #
-# CONFIG_BSP_USING_HWTIMER0 is not set
-# CONFIG_BSP_USING_HWTIMER1 is not set
-# CONFIG_BSP_USING_HWTIMER2 is not set
-# CONFIG_BSP_USING_HWTIMER3 is not set
+# CONFIG_BSP_USING_AD16C4T0_HWTIMER is not set
+# CONFIG_BSP_USING_GP16C4T0_HWTIMER is not set
+# CONFIG_BSP_USING_GP16C2T0_HWTIMER is not set
+# CONFIG_BSP_USING_GP16C2T1_HWTIMER is not set
+# CONFIG_BSP_USING_BS16T0_HWTIMER is not set
+# CONFIG_BSP_USING_BS16T2_HWTIMER is not set
+# CONFIG_BSP_USING_BS16T3_HWTIMER is not set
 
 #
 # RTC Drivers
@@ -515,7 +521,7 @@ CONFIG_BSP_USING_UART2=y
 #
 # ADC Drivers
 #
-# CONFIG_BSP_USING_ADC is not set
+# CONFIG_BSP_USING_ADC0 is not set
 
 #
 # Onboard Peripheral Drivers
@@ -532,6 +538,7 @@ CONFIG_BSP_USING_UART2=y
 # CONFIG_BSP_USING_EXAMPLE_ADC_VOL is not set
 # CONFIG_BSP_USING_EXAMPLE_HWTIMER is not set
 # CONFIG_BSP_USING_EXAMPLE_I2C is not set
+# CONFIG_BSP_USING_EXAMPLE_I2C_E2PROM is not set
 # CONFIG_BSP_USING_EXAMPLE_LED_BLINK is not set
 # CONFIG_BSP_USING_EXAMPLE_PIN_BEEP is not set
 # CONFIG_BSP_USING_EXAMPLE_PWM_LED is not set

bsp/essemi/es32f0654/drivers/ES/Kconfig

@@ -0,0 +1,160 @@
+menu "UART Drivers"
+
+    config BSP_USING_UART0
+        bool "Register UART0"
+        select RT_USING_SERIAL
+        default n
+
+    config BSP_USING_UART1
+        bool "Register UART1"
+        select RT_USING_SERIAL
+        default n
+
+    config BSP_USING_UART2
+        bool "Register UART2"
+        select RT_USING_SERIAL
+        default y
+
+    config BSP_USING_UART3
+        bool "Register UART3"
+        select RT_USING_SERIAL
+        default n
+
+    config BSP_USING_USART0
+        bool "Register USART0"
+        select RT_USING_SERIAL
+        default n
+
+    config BSP_USING_USART1
+        bool "Register USART1"
+        select RT_USING_SERIAL
+        default n
+endmenu
+
+menu "SPI Drivers"
+
+    config BSP_USING_SPI0
+        bool "Register SPI0"
+        select RT_USING_SPI
+        select RT_USING_PIN
+        default n
+
+    config BSP_USING_SPI1
+        bool "Register SPI1"
+        select RT_USING_SPI
+        select RT_USING_PIN
+        default n
+endmenu
+
+menu "I2C Drivers"
+    config BSP_USING_I2C0
+        bool "Register I2C0"
+        select RT_USING_I2C
+        default n
+
+    config BSP_USING_I2C1
+        bool "Register I2C1"
+        select RT_USING_I2C
+        default n
+endmenu
+
+menu "CAN Drivers"
+    config BSP_USING_CAN0
+        bool "Register CAN0"
+        select RT_USING_CAN
+        select RT_CAN_USING_HDR
+        default n
+endmenu
+
+menu "PWM Drivers"
+    config BSP_USING_AD16C4T0_PWM
+        bool "Register pwm0"
+        select RT_USING_PWM
+        default n 
+
+    config BSP_USING_GP16C4T0_PWM
+        bool "Register pwm1"
+        select RT_USING_PWM
+        default n
+
+    config BSP_USING_GP16C2T0_PWM
+        bool "Register pwm2"
+        select RT_USING_PWM
+        default n
+
+    config BSP_USING_GP16C2T1_PWM
+        bool "Register pwm3"
+        select RT_USING_PWM
+        default n
+endmenu
+
+menu "HWtimer Drivers"
+    config BSP_USING_AD16C4T0_HWTIMER
+        bool "Register timer0"
+        select RT_USING_HWTIMER
+        default n
+        depends on !BSP_USING_AD16C4T0_PWM
+
+    config BSP_USING_GP16C4T0_HWTIMER
+        bool "Register timer1"
+        select RT_USING_HWTIMER
+        default n
+        depends on !BSP_USING_GP16C4T0_PWM
+
+    config BSP_USING_GP16C2T0_HWTIMER
+        bool "Register timer2"
+        select RT_USING_HWTIMER
+        default n
+        depends on !BSP_USING_GP16C2T0_PWM
+
+    config BSP_USING_GP16C2T1_HWTIMER
+        bool "Register timer3"
+        select RT_USING_HWTIMER
+        default n
+        depends on !BSP_USING_GP16C2T1_PWM
+
+    config BSP_USING_BS16T0_HWTIMER
+        bool "Register timer4"
+        select RT_USING_HWTIMER
+        default n
+
+    config BSP_USING_BS16T1_HWTIMER
+        bool "Register timer5"
+        select RT_USING_HWTIMER
+        default n
+        depends on !BSP_USING_UART2
+
+    config BSP_USING_BS16T2_HWTIMER
+        bool "Register timer6"
+        select RT_USING_HWTIMER
+        default n
+        depends on !BSP_USING_UART3
+
+    config BSP_USING_BS16T3_HWTIMER
+        bool "Register timer7"
+        select RT_USING_HWTIMER
+        default n
+endmenu
+
+menu "RTC Drivers"
+    config BSP_USING_RTC
+        bool "Register RTC"
+        select RT_USING_RTC
+        default n
+endmenu
+
+menu "PM Drivers"
+    config BSP_USING_PM
+        bool "Using PM"
+        select RT_USING_PM
+        default n
+endmenu
+
+menu "ADC Drivers"
+    config BSP_USING_ADC0
+        bool "Using ADC"
+        select RT_USING_ADC
+        select BSP_USING_ADC
+        default n
+endmenu
+

bsp/essemi/es32f0654/drivers/ES/es_conf_info_adc.h

@@ -0,0 +1,97 @@
+/*
+ *  Change Logs:
+ *  Date            Author          Notes
+ *  2021-04-20      liuhy          the first version
+ *
+ * Copyright (C) 2021 Shanghai Eastsoft Microelectronics Co., Ltd. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+#ifndef __ES_CONF_INFO_ADC_H__
+#define __ES_CONF_INFO_ADC_H__
+ 
+#include "es_conf_info_map.h"
+
+#include <ald_adc.h>
+
+
+#define ES_C_ADC_CLK_DIV_1     ADC_CKDIV_1      
+#define ES_C_ADC_CLK_DIV_2     ADC_CKDIV_2
+#define ES_C_ADC_CLK_DIV_4     ADC_CKDIV_4
+#define ES_C_ADC_CLK_DIV_8     ADC_CKDIV_8
+#define ES_C_ADC_CLK_DIV_16     ADC_CKDIV_16
+#define ES_C_ADC_CLK_DIV_32     ADC_CKDIV_32  
+#define ES_C_ADC_CLK_DIV_64     ADC_CKDIV_64
+#define ES_C_ADC_CLK_DIV_128     ADC_CKDIV_128
+
+#define ES_C_ADC_ALIGN_RIGHT        ADC_DATAALIGN_RIGHT   
+#define ES_C_ADC_ALIGN_LEFT        ADC_DATAALIGN_LEFT
+
+#define ES_C_ADC_CONV_BIT_6        ADC_CONV_BIT_6 
+#define ES_C_ADC_CONV_BIT_8        ADC_CONV_BIT_8
+#define ES_C_ADC_CONV_BIT_10        ADC_CONV_BIT_10
+#define ES_C_ADC_CONV_BIT_12        ADC_CONV_BIT_12
+   
+#define ES_C_ADC_SAMPLE_TIME_1       ADC_SAMPLETIME_1   
+#define ES_C_ADC_SAMPLE_TIME_2       ADC_SAMPLETIME_2
+#define ES_C_ADC_SAMPLE_TIME_4       ADC_SAMPLETIME_4
+#define ES_C_ADC_SAMPLE_TIME_15       ADC_SAMPLETIME_15
+
+/* ADC 配置 */
+
+/* codes_main */
+
+
+#define ES_ADC0_ALIGN      ES_C_ADC_ALIGN_RIGHT    
+#define ES_ADC1_ALIGN      ES_C_ADC_ALIGN_RIGHT   
+#define ES_ADC1_DATA_BIT   ES_C_ADC_CONV_BIT_12      
+#define ES_ADC0_DATA_BIT   ES_C_ADC_CONV_BIT_12
+
+#ifndef  ES_DEVICE_NAME_ADC0
+#define  ES_DEVICE_NAME_ADC0     "adc0"
+#endif 
+#ifndef  ES_DEVICE_NAME_ADC1
+#define  ES_DEVICE_NAME_ADC1     "adc1"
+#endif
+
+#ifndef  ES_ADC0_CLK_DIV 
+#define ES_ADC0_CLK_DIV    ES_C_ADC_CLK_DIV_128 
+#endif                   
+#ifndef  ES_ADC0_ALIGN 
+#define ES_ADC0_ALIGN      ES_C_ADC_ALIGN_RIGHT
+#endif
+#ifndef  ES_ADC0_DATA_BIT 
+#define ES_ADC0_DATA_BIT   ES_C_ADC_CONV_BIT_12
+#endif
+#ifndef  ES_ADC0_NCH_SAMPLETIME 
+#define ES_ADC0_NCH_SAMPLETIME    ES_C_ADC_SAMPLE_TIME_4
+#endif
+
+#ifndef  ES_ADC1_CLK_DIV 
+#define ES_ADC1_CLK_DIV    ES_C_ADC_CLK_DIV_128 
+#endif                   
+#ifndef  ES_ADC1_ALIGN 
+#define ES_ADC1_ALIGN      ES_C_ADC_ALIGN_RIGHT
+#endif
+#ifndef  ES_ADC1_DATA_BIT 
+#define ES_ADC1_DATA_BIT   ES_C_ADC_CONV_BIT_12
+#endif
+#ifndef  ES_ADC1_NCH_SAMPLETIME 
+#define ES_ADC1_NCH_SAMPLETIME    ES_C_ADC_SAMPLE_TIME_4
+#endif
+
+#endif