update

Author: messigogogo

bsp/phytium/aarch32/.config

@@ -114,7 +114,7 @@ CONFIG_RT_NAME_MAX=16
 # CONFIG_RT_USING_SMART is not set
 # CONFIG_RT_USING_AMP is not set
 CONFIG_RT_USING_SMP=y
-CONFIG_RT_CPUS_NR=2
+CONFIG_RT_CPUS_NR=4
 CONFIG_RT_ALIGN_SIZE=4
 # CONFIG_RT_THREAD_PRIORITY_8 is not set
 CONFIG_RT_THREAD_PRIORITY_32=y
@@ -358,46 +358,8 @@ CONFIG_RT_BLK_PARTITION_EFI=y
 CONFIG_RT_USING_PIN=y
 CONFIG_RT_USING_KTIME=y
 # CONFIG_RT_USING_HWTIMER is not set
-CONFIG_RT_USING_CHERRYUSB=y
-# CONFIG_RT_CHERRYUSB_DEVICE is not set
-CONFIG_RT_CHERRYUSB_HOST=y
-# CONFIG_RT_CHERRYUSB_HOST_CUSTOM is not set
-# CONFIG_RT_CHERRYUSB_HOST_EHCI_BL is not set
-# CONFIG_RT_CHERRYUSB_HOST_EHCI_HPM is not set
-# CONFIG_RT_CHERRYUSB_HOST_EHCI_AIC is not set
-# CONFIG_RT_CHERRYUSB_HOST_EHCI_MCX is not set
-# CONFIG_RT_CHERRYUSB_HOST_EHCI_NUC980 is not set
-# CONFIG_RT_CHERRYUSB_HOST_EHCI_MA35D0 is not set
-# CONFIG_RT_CHERRYUSB_HOST_EHCI_CUSTOM is not set
-# CONFIG_RT_CHERRYUSB_HOST_DWC2_ST is not set
-# CONFIG_RT_CHERRYUSB_HOST_DWC2_ESP is not set
-# CONFIG_RT_CHERRYUSB_HOST_DWC2_KENDRYTE is not set
-# CONFIG_RT_CHERRYUSB_HOST_DWC2_CUSTOM is not set
-# CONFIG_RT_CHERRYUSB_HOST_MUSB_ES is not set
-# CONFIG_RT_CHERRYUSB_HOST_MUSB_SUNXI is not set
-# CONFIG_RT_CHERRYUSB_HOST_MUSB_BK is not set
-# CONFIG_RT_CHERRYUSB_HOST_MUSB_CUSTOM is not set
-# CONFIG_RT_CHERRYUSB_HOST_PUSB2 is not set
-CONFIG_RT_CHERRYUSB_HOST_XHCI=y
-# CONFIG_RT_CHERRYUSB_HOST_KINETIS_MCX is not set
-# CONFIG_RT_CHERRYUSB_HOST_KINETIS_CUSTOM is not set
-# CONFIG_RT_CHERRYUSB_HOST_CDC_ACM is not set
-CONFIG_RT_CHERRYUSB_HOST_HID=y
-CONFIG_RT_CHERRYUSB_HOST_MSC=y
-# CONFIG_RT_CHERRYUSB_HOST_CDC_ECM is not set
-# CONFIG_RT_CHERRYUSB_HOST_CDC_RNDIS is not set
-# CONFIG_RT_CHERRYUSB_HOST_CDC_NCM is not set
-# CONFIG_RT_CHERRYUSB_HOST_VIDEO is not set
-# CONFIG_RT_CHERRYUSB_HOST_AUDIO is not set
-# CONFIG_RT_CHERRYUSB_HOST_BLUETOOTH is not set
-# CONFIG_RT_CHERRYUSB_HOST_ASIX is not set
-# CONFIG_RT_CHERRYUSB_HOST_RTL8152 is not set
-# CONFIG_RT_CHERRYUSB_HOST_FTDI is not set
-# CONFIG_RT_CHERRYUSB_HOST_CH34X is not set
-# CONFIG_RT_CHERRYUSB_HOST_CP210X is not set
-# CONFIG_RT_CHERRYUSB_HOST_PL2303 is not set
+# CONFIG_RT_USING_CHERRYUSB is not set
 CONFIG_RT_LWIP_PBUF_POOL_BUFSIZE=1700
-# CONFIG_RT_CHERRYUSB_HOST_TEMPLATE is not set
 # end of Device Drivers
 
 #
@@ -1486,7 +1448,7 @@ CONFIG_RT_PAGE_MAX_ORDER=11
 #
 # On-chip Peripheral Drivers
 #
-CONFIG_BSP_USING_DRIVERS_EXAMPLE=y
+# CONFIG_BSP_USING_DRIVERS_EXAMPLE is not set
 CONFIG_BSP_USING_IOPAD=y
 CONFIG_BSP_USING_UART=y
 CONFIG_RT_USING_UART0=y
@@ -1520,8 +1482,8 @@ CONFIG_RT_USING_PWM2=y
 # CONFIG_RT_USING_PWM7 is not set
 CONFIG_BSP_USING_I2C=y
 CONFIG_I2C_USE_MIO=y
-CONFIG_RT_USING_MIO0=y
-CONFIG_RT_USING_MIO1=y
+# CONFIG_RT_USING_MIO0 is not set
+# CONFIG_RT_USING_MIO1 is not set
 # CONFIG_RT_USING_MIO2 is not set
 # CONFIG_RT_USING_MIO3 is not set
 # CONFIG_RT_USING_MIO4 is not set
@@ -1535,7 +1497,7 @@ CONFIG_RT_USING_MIO1=y
 # CONFIG_RT_USING_MIO12 is not set
 # CONFIG_RT_USING_MIO13 is not set
 # CONFIG_RT_USING_MIO14 is not set
-# CONFIG_RT_USING_MIO15 is not set
+CONFIG_RT_USING_MIO15=y
 # CONFIG_I2C_USE_CONTROLLER is not set
 CONFIG_BSP_USING_SDIF=y
 CONFIG_BSP_USING_SDCARD_FATFS=y
@@ -1571,17 +1533,17 @@ CONFIG_USE_AARCH64_L1_TO_AARCH32=y
 # Soc configuration
 #
 # CONFIG_TARGET_PHYTIUMPI is not set
-# CONFIG_TARGET_E2000Q is not set
-CONFIG_TARGET_E2000D=y
+CONFIG_TARGET_E2000Q=y
+# CONFIG_TARGET_E2000D is not set
 # CONFIG_TARGET_E2000S is not set
 # CONFIG_TARGET_FT2004 is not set
 # CONFIG_TARGET_D2000 is not set
 # CONFIG_TARGET_PD2308 is not set
 # CONFIG_TARGET_PS2316 is not set
 # CONFIG_TARGET_QEMU_VIRT is not set
 CONFIG_SOC_NAME="e2000"
-CONFIG_TARGET_TYPE_NAME="d"
-CONFIG_SOC_CORE_NUM=2
+CONFIG_TARGET_TYPE_NAME="q"
+CONFIG_SOC_CORE_NUM=4
 CONFIG_F32BIT_MEMORY_ADDRESS=0x80000000
 CONFIG_F32BIT_MEMORY_LENGTH=0x80000000
 CONFIG_F64BIT_MEMORY_ADDRESS=0x2000000000
@@ -1595,22 +1557,21 @@ CONFIG_DEFAULT_DEBUG_PRINT_UART1=y
 #
 # Board Configuration
 #
-CONFIG_E2000D_DEMO_BOARD=y
 CONFIG_BOARD_NAME="demo"
-
-#
-# IO mux configuration when board start up
-#
 # CONFIG_USE_SPI_IOPAD is not set
 # CONFIG_USE_GPIO_IOPAD is not set
 # CONFIG_USE_CAN_IOPAD is not set
 # CONFIG_USE_QSPI_IOPAD is not set
 # CONFIG_USE_PWM_IOPAD is not set
-# CONFIG_USE_ADC_IOPAD is not set
 # CONFIG_USE_MIO_IOPAD is not set
 # CONFIG_USE_TACHO_IOPAD is not set
 # CONFIG_USE_UART_IOPAD is not set
 # CONFIG_USE_THIRD_PARTY_IOPAD is not set
+CONFIG_E2000Q_DEMO_BOARD=y
+
+#
+# IO mux configuration when board start up
+#
 # end of IO mux configuration when board start up
 
 # CONFIG_CUS_DEMO_BOARD is not set

bsp/phytium/aarch32/rtconfig.h

@@ -63,7 +63,7 @@
 /* end of klibc options */
 #define RT_NAME_MAX 16
 #define RT_USING_SMP
-#define RT_CPUS_NR 2
+#define RT_CPUS_NR 4
 #define RT_ALIGN_SIZE 4
 #define RT_THREAD_PRIORITY_32
 #define RT_THREAD_PRIORITY_MAX 32
@@ -216,11 +216,6 @@
 /* end of Partition Types */
 #define RT_USING_PIN
 #define RT_USING_KTIME
-#define RT_USING_CHERRYUSB
-#define RT_CHERRYUSB_HOST
-#define RT_CHERRYUSB_HOST_XHCI
-#define RT_CHERRYUSB_HOST_HID
-#define RT_CHERRYUSB_HOST_MSC
 #define RT_LWIP_PBUF_POOL_BUFSIZE 1700
 /* end of Device Drivers */
 
@@ -540,7 +535,6 @@
 
 /* On-chip Peripheral Drivers */
 
-#define BSP_USING_DRIVERS_EXAMPLE
 #define BSP_USING_IOPAD
 #define BSP_USING_UART
 #define RT_USING_UART0
@@ -560,8 +554,7 @@
 #define RT_USING_PWM2
 #define BSP_USING_I2C
 #define I2C_USE_MIO
-#define RT_USING_MIO0
-#define RT_USING_MIO1
+#define RT_USING_MIO15
 #define BSP_USING_SDIF
 #define BSP_USING_SDCARD_FATFS
 #define USING_SDIF0
@@ -589,10 +582,10 @@
 
 /* Soc configuration */
 
-#define TARGET_E2000D
+#define TARGET_E2000Q
 #define SOC_NAME "e2000"
-#define TARGET_TYPE_NAME "d"
-#define SOC_CORE_NUM 2
+#define TARGET_TYPE_NAME "q"
+#define SOC_CORE_NUM 4
 #define F32BIT_MEMORY_ADDRESS 0x80000000
 #define F32BIT_MEMORY_LENGTH 0x80000000
 #define F64BIT_MEMORY_ADDRESS 0x2000000000
@@ -603,8 +596,8 @@
 
 /* Board Configuration */
 
-#define E2000D_DEMO_BOARD
 #define BOARD_NAME "demo"
+#define E2000Q_DEMO_BOARD
 
 /* IO mux configuration when board start up */