[drivers/spi]统一软件SPI配置

Rbb666 · Rbb666 · commit d83d71cc057a · 2025-02-09T15:48:49.000+08:00
diff --git a/bsp/nxp/lpc/lpc55sxx/lpc55s69_nxp_evk/board/Kconfig b/bsp/nxp/lpc/lpc55sxx/lpc55s69_nxp_evk/board/Kconfig
@@ -174,7 +174,7 @@ menu "On-chip Peripheral Drivers"
         bool "Enable soft SPI BUS"
         default n
         select RT_USING_PIN
-        select RT_USING_SPI_BITOPS
+        select RT_USING_SOFT_SPI
         select RT_USING_SPI
         if BSP_USING_SOFT_SPI
             config BSP_USING_SOFT_SPI1
diff --git a/bsp/raspberry-pico/board/Kconfig b/bsp/raspberry-pico/board/Kconfig
@@ -154,7 +154,7 @@ menu "On-chip Peripheral Drivers"
         bool "Enable soft SPI BUS"
         default n
         select RT_USING_PIN
-        select RT_USING_SPI_BITOPS
+        select RT_USING_SOFT_SPI
         select RT_USING_SPI
         if BSP_USING_SOFT_SPI
             config BSP_USING_SOFT_SPI0
diff --git a/bsp/renesas/ra6m3-hmi-board/board/Kconfig b/bsp/renesas/ra6m3-hmi-board/board/Kconfig
@@ -202,7 +202,7 @@ menu "Hardware Drivers Config"
             bool "Enable soft SPI BUS"
             default n
             select RT_USING_PIN
-            select RT_USING_SPI_BITOPS
+            select RT_USING_SOFT_SPI
             select RT_USING_SPI
             if BSP_USING_SOFT_SPI
                 config BSP_USING_SOFT_SPI1
diff --git a/bsp/stm32/libraries/HAL_Drivers/drivers/SConscript b/bsp/stm32/libraries/HAL_Drivers/drivers/SConscript
@@ -29,7 +29,7 @@ if GetDepend(['RT_USING_SPI']):
 if GetDepend(['RT_USING_QSPI']):
     src += ['drv_qspi.c']
 
-if GetDepend('RT_USING_SPI_BITOPS'):
+if GetDepend('RT_USING_SOFT_SPI'):
     src += ['drv_soft_spi.c']
 
 if GetDepend(['RT_USING_I2C', 'RT_USING_I2C_BITOPS']):
diff --git a/bsp/stm32/libraries/HAL_Drivers/drivers/drv_soft_spi.c b/bsp/stm32/libraries/HAL_Drivers/drivers/drv_soft_spi.c
@@ -12,7 +12,7 @@
 #include "drv_soft_spi.h"
 #include "drv_config.h"
 
-#if defined(RT_USING_SPI) && defined(RT_USING_SPI_BITOPS) && defined(RT_USING_PIN)
+#if defined(RT_USING_SPI) && defined(RT_USING_SOFT_SPI) && defined(RT_USING_PIN)
 
 //#define DRV_DEBUG
 #define LOG_TAG             "drv.soft_spi"
@@ -203,4 +203,4 @@ int rt_hw_softspi_init(void)
 }
 INIT_BOARD_EXPORT(rt_hw_softspi_init);
 
-#endif /* defined(RT_USING_SPI) && defined(RT_USING_SPI_BITOPS) && defined(RT_USING_PIN) */
+#endif /* defined(RT_USING_SPI) && defined(RT_USING_SOFT_SPI) && defined(RT_USING_PIN) */
diff --git a/bsp/stm32/libraries/HAL_Drivers/drivers/drv_spi.c b/bsp/stm32/libraries/HAL_Drivers/drivers/drv_spi.c
@@ -534,6 +534,7 @@ static rt_err_t spi_configure(struct rt_spi_device *device,
 
     struct stm32_spi *spi_drv =  rt_container_of(device->bus, struct stm32_spi, spi_bus);
     spi_drv->cfg = configuration;
+    rt_kprintf("@spi_configure\n");
 
     return stm32_spi_init(spi_drv, configuration);
 }
diff --git a/bsp/stm32/stm32f407-atk-explorer/board/Kconfig b/bsp/stm32/stm32f407-atk-explorer/board/Kconfig
@@ -288,7 +288,7 @@ menu "On-chip Peripheral Drivers"
         bool "Enable soft SPI BUS"
         default n
         select RT_USING_SPI
-        select RT_USING_SPI_BITOPS
+        select RT_USING_SOFT_SPI
         select RT_USING_PIN
         if BSP_USING_SOFT_SPI
             menuconfig BSP_USING_SOFT_SPI1
diff --git a/bsp/stm32/stm32f407-fk407m2-zgt6/board/Kconfig b/bsp/stm32/stm32f407-fk407m2-zgt6/board/Kconfig
@@ -161,7 +161,7 @@ menu "On-chip Peripheral Drivers"
         bool "Enable soft SPI BUS"
         default n
         select RT_USING_SPI
-        select RT_USING_SPI_BITOPS
+        select RT_USING_SOFT_SPI
         select RT_USING_PIN
         if BSP_USING_SOFT_SPI
             menuconfig BSP_USING_SOFT_SPI1
diff --git a/bsp/stm32/stm32f407-lckfb-skystar/board/Kconfig b/bsp/stm32/stm32f407-lckfb-skystar/board/Kconfig
@@ -231,7 +231,7 @@ menu "On-chip Peripheral Drivers"
         bool "Enable soft SPI BUS"
         default n
         select RT_USING_SPI
-        select RT_USING_SPI_BITOPS
+        select RT_USING_SOFT_SPI
         select RT_USING_PIN
         if BSP_USING_SOFT_SPI
             menuconfig BSP_USING_SOFT_SPI1
diff --git a/bsp/stm32/stm32f407-rt-spark/board/Kconfig b/bsp/stm32/stm32f407-rt-spark/board/Kconfig
@@ -454,7 +454,7 @@ menu "On-chip Peripheral Drivers"
         bool "Enable soft SPI BUS"
         default n
         select RT_USING_SPI
-        select RT_USING_SPI_BITOPS
+        select RT_USING_SOFT_SPI
         select RT_USING_PIN
         if BSP_USING_SOFT_SPI
             menuconfig BSP_USING_SOFT_SPI1
diff --git a/bsp/wch/risc-v/ch32v208w-r0/board/Kconfig b/bsp/wch/risc-v/ch32v208w-r0/board/Kconfig
@@ -164,7 +164,7 @@ menu "On-chip Peripheral Drivers"
 
     menuconfig BSP_USING_SPI
         bool "Enable SPI"
-        select RT_USING_SPI_BITOPS
+        select RT_USING_SOFT_SPI
         select RT_USING_SPI
 
         if BSP_USING_SPI
diff --git a/bsp/wch/risc-v/ch32v307v-r1/board/Kconfig b/bsp/wch/risc-v/ch32v307v-r1/board/Kconfig
@@ -222,7 +222,7 @@ menu "On-chip Peripheral Drivers"
 
     menuconfig BSP_USING_SOFT_SPI
         bool "Enable SOFT SPI"
-        select RT_USING_SPI_BITOPS
+        select RT_USING_SOFT_SPI
 
         if BSP_USING_SOFT_SPI
             config BSP_USING_SOFT_SPI1
diff --git a/bsp/wch/risc-v/yd-ch32v307vct6/board/Kconfig b/bsp/wch/risc-v/yd-ch32v307vct6/board/Kconfig
@@ -161,7 +161,7 @@ menu "On-chip Peripheral Drivers"
 
     menuconfig BSP_USING_SOFT_SPI
         bool "Enable SOFT SPI"
-        select RT_USING_SPI_BITOPS
+        select RT_USING_SOFT_SPI
 
         if BSP_USING_SOFT_SPI
             config BSP_USING_SOFT_SPI1
diff --git a/components/drivers/spi/Kconfig b/components/drivers/spi/Kconfig
@@ -3,22 +3,11 @@ config RT_USING_SPI
     default n
 
     if RT_USING_SPI
-        config RT_USING_SPI_BITOPS
-            select RT_USING_PIN
-            bool "Use GPIO to simulate SPI"
-            default n
-
-        if RT_USING_SPI_BITOPS
-            config RT_SPI_BITOPS_DEBUG
-                bool "Use simulate SPI debug message"
-                default n
-        endif
 
         menuconfig RT_USING_SOFT_SPI
-            bool "Use GPIO to soft simulate SPI"
+            bool "Use GPIO to simulate SPI"
             default n
             select RT_USING_PIN
-            select RT_USING_SPI_BITOPS
             if RT_USING_SOFT_SPI
                 menuconfig RT_USING_SOFT_SPI0
                     bool "Enable SPI0 Bus (software simulation)"
@@ -188,9 +177,13 @@ config RT_USING_SPI
                             range 0 32767
                             default 1
                     endif
-
             endif
 
+        config RT_SPI_BITOPS_DEBUG
+            bool "Use simulate SPI debug message"
+            depends on RT_USING_SOFT_SPI
+            default n
+
         config RT_USING_QSPI
             bool "Enable QSPI mode"
             default n
diff --git a/components/drivers/spi/SConscript b/components/drivers/spi/SConscript
@@ -7,10 +7,8 @@ src = ['dev_spi_core.c', 'dev_spi.c']
 CPPPATH = [cwd, cwd + '/../include']
 LOCAL_CFLAGS = ''
 
-if GetDepend('RT_USING_SPI_BITOPS'):
-    src += ['dev_spi_bit_ops.c']
-
 if GetDepend('RT_USING_SOFT_SPI'):
+    src += ['dev_spi_bit_ops.c']
     src += ['dev_soft_spi.c']
 
 if GetDepend('RT_USING_QSPI'):

Original file line number	Diff line number	Diff line change
`@@ -534,6 +534,7 @@ static rt_err_t spi_configure(struct rt_spi_device *device,`
`534`	`534`
`535`	`535`	`struct stm32_spi *spi_drv = rt_container_of(device->bus, struct stm32_spi, spi_bus);`
`536`	`536`	`spi_drv->cfg = configuration;`
	`537`	`+ rt_kprintf("@spi_configure\n");`
`537`	`538`
`538`	`539`	`return stm32_spi_init(spi_drv, configuration);`
`539`	`540`	`}`