Add basic support for ATtiny44A

Signed-off-by: Michael Darr <[email protected]>

Author: MichaelDarr

Cargo.toml

@@ -51,6 +51,7 @@ attiny2313 = ["device-selected"]
 attiny2313a = ["device-selected"]
 attiny402 = ["device-selected"]
 attiny404 = ["device-selected"]
+attiny44a = ["device-selected"]
 attiny816 = ["device-selected"]
 attiny828 = ["device-selected"]
 attiny84 = ["device-selected"]

Makefile

@@ -1,6 +1,6 @@
 all: deps chips
 
-CHIPS := at90usb1286 atmega1280 atmega1284p atmega128a atmega128rfa1 atmega164pa atmega168 atmega2560 atmega8 atmega8u2 atmega324pa atmega328p atmega328pb atmega32a atmega32u4 atmega4808 atmega4809 atmega48p atmega64 atmega644 atmega88p attiny13a attiny202 attiny2313 attiny2313a attiny402 attiny404 attiny84 attiny85 attiny88 attiny816 attiny828 attiny841 attiny861 attiny167 attiny1614
+CHIPS := at90usb1286 atmega1280 atmega1284p atmega128a atmega128rfa1 atmega164pa atmega168 atmega2560 atmega8 atmega8u2 atmega324pa atmega328p atmega328pb atmega32a atmega32u4 atmega4808 atmega4809 atmega48p atmega64 atmega644 atmega88p attiny13a attiny202 attiny2313 attiny2313a attiny402 attiny404 attiny44a attiny84 attiny85 attiny88 attiny816 attiny828 attiny841 attiny861 attiny167 attiny1614
 
 RUSTUP_TOOLCHAIN ?= nightly
 

README.md

@@ -19,17 +19,17 @@ Via the feature you can select which chip you want the register specifications f
 |   `atmega64`    |              |                   |               |  `attiny202`  |
 |   `atmega644`   |              |                   |               |  `attiny402`  |
 |   `atmega88p`   |              |                   |               |  `attiny404`  |
-|   `atmega168`   |              |                   |               |  `attiny84`   |
-|  `atmega324pa`  |              |                   |               |  `attiny85`   |
-|  `atmega328p`   |              |                   |               |  `attiny88`   |
-|  `atmega328pb`  |              |                   |               |  `attiny816`  |
-|   `atmega32a`   |              |                   |               |  `attiny828`  |
-|  `atmega1280`   |              |                   |               |  `attiny841`  |
-|  `atmega1284p`  |              |                   |               |  `attiny861`  |
-|  `atmega128a`   |              |                   |               | `attiny1614`  |
-| `atmega128rfa1` |              |                   |               | `attiny2313`  |
-|  `atmega2560`   |              |                   |               | `attiny2313a` |
-|  `atmega164pa`  |              |                   |               |               |
+|   `atmega168`   |              |                   |               |  `attiny44a`  |
+|  `atmega324pa`  |              |                   |               |  `attiny84`   |
+|  `atmega328p`   |              |                   |               |  `attiny85`   |
+|  `atmega328pb`  |              |                   |               |  `attiny88`   |
+|   `atmega32a`   |              |                   |               |  `attiny816`  |
+|  `atmega1280`   |              |                   |               |  `attiny828`  |
+|  `atmega1284p`  |              |                   |               |  `attiny841`  |
+|  `atmega128a`   |              |                   |               |  `attiny861`  |
+| `atmega128rfa1` |              |                   |               | `attiny1614`  |
+|  `atmega2560`   |              |                   |               | `attiny2313`  |
+|  `atmega164pa`  |              |                   |               | `attiny2313a` |
 
 ## Build Instructions
 The version on `crates.io` is pre-built.  The following is only necessary when trying to build this crate from source.

patch/attiny44a.yaml

@@ -0,0 +1 @@
+_svd: ../svd/attiny44a.svd

src/devices/mod.rs

@@ -115,6 +115,10 @@ pub mod attiny402;
 #[cfg(feature = "attiny404")]
 pub mod attiny404;
 
+/// [ATtiny44a](https://www.microchip.com/en-us/product/ATtiny44a)
+#[cfg(feature = "attiny44a")]
+pub mod attiny44a;
+
 /// [ATtiny816](https://www.microchip.com/wwwproducts/en/ATtiny816)
 #[cfg(feature = "attiny816")]
 pub mod attiny816;

src/lib.rs

@@ -28,6 +28,7 @@
 #![cfg_attr(feature = "attiny2313a", doc = "**attiny2313a**,")]
 #![cfg_attr(feature = "attiny402", doc = "**attiny402**,")]
 #![cfg_attr(feature = "attiny404", doc = "**attiny404**,")]
+#![cfg_attr(feature = "attiny44a", doc = "**attiny44a**,")]
 #![cfg_attr(feature = "attiny816", doc = "**attiny816**,")]
 #![cfg_attr(feature = "attiny828", doc = "**attiny828**,")]
 #![cfg_attr(feature = "attiny84", doc = "**attiny84**,")]
@@ -71,6 +72,7 @@
 //! `attiny2313a`,
 //! `attiny402`,
 //! `attiny404`,
+//! `attiny44a`,
 //! `attiny816`,
 //! `attiny828`,
 //! `attiny84`,
@@ -227,6 +229,7 @@ compile_error!(
     * attiny2313
     * attiny2313a
     * attiny402
+    * attiny44a
     * attiny816
     * attiny828
     * attiny84
@@ -296,6 +299,8 @@ pub use crate::devices::attiny2313a;
 pub use crate::devices::attiny402;
 #[cfg(feature = "attiny404")]
 pub use crate::devices::attiny404;
+#[cfg(feature = "attiny44a")]
+pub use crate::devices::attiny44a;
 #[cfg(feature = "attiny816")]
 pub use crate::devices::attiny816;
 #[cfg(feature = "attiny828")]