Since new update Clients can't connect even after resettlement

[SECRET-GUEST]

Hi there !

I think I'm about to know all the troubleshootings documentation but I can follow any steps I want it's not fixing my issue .

What I have/ I did ;

• I'm using a Raspberry 3b.
• Problem's not coming from the charge (I have an official one but I tried many other 5.1v and fast charge it didn't solved the problem).
• I have a good and stable network quality.
• Issue appeard right after the new update yesterday.
• My location isn't the problem, I mean the device location.
• I have VPN/ TOR directly on my devices, not on RPI.
• I have reset all installation even from 0 but I couldn't connect to SSID "Webgui" .
  |-> So for sure the password isn't the problem (privileges neither, it's obvious but I prefere to write it x)
• I'm using this RPI only for raspap and nothing else.

Icing on the cake ; my smartsh*t like plugs or lamps are still connected to the RPI and works perfectly when I use the original SD card but for everything else smartphone, tabs, pc impossible to connect.

But to be sure I'm missing nothing ;

After the update I was able to connect only one device
=> I had to disconnect my computer to use my phone for example

But now nothing is working exept as I wrote the domotic

### Thanks for help hope this report will be useful for someone !

[billz]

You can enable logging for both hostapd and dhcp to diagnose these issues.
https://docs.raspap.com/ap-basics/#troubleshooting

Also, if this is an upgrade and you changed any settings, be sure first to restart the hotspot from the UI.

[SECRET-GUEST]

As I said I used another SD card to make test after I discovered there was no issues at all found by any systems so I changed nothing and all diagnostics was empty of possible solution that's why I'm posting this here btw.

But for some reason today the sh*t works again after a dist-upgrade 🤷🏻 ( I obviously also tried this before)

I suppose maybe the pi or internet get a surge during the update and a file was lightly corrupted (???) not enough to be detected but I don't know it's just complot theory at this point ..

[billz]

Tough to say but it's possible. We recommend a dist-upgrade or full-upgrade before installing or upgrading RaspAP, followed by a reboot. https://docs.raspap.com/#quick-start