A wizard to setup the fan curve

[zulakmarbaharin]

I find it difficult to fine tune each of the fan curve to get the sweet spot even for general application. Imagine there are 6 fans in a case and each one of them has a different CFM specification, with slightly wrong tune, the tool could create a -ve pressure airflow when the +ve one is most needed in particular usage.

It would be great if the tool has a wizard to generate an optimized fan curve (at least) for that specific case.

Example

1. The tool will need the user to specify the location of each fan in the case (top, exhaust, intake, bottom, rad, etc)
2. Get basic information from user like target temperature when idle/gaming/rendering or perhaps highest/medium temperature for their case.
3. Then let the tool run at least 5-10mins load test (CPU and GPU) to get all the necessary readings. During the load test the tool will make active adjustment to the fan speed to get the healthy temperature reading.
4. Base on the data collected, the tool will generate the fan curve and apply the setting.