drm/amd/display: Add hubp cache reset when powergating

[Why]
When HUBP is power gated, the SW state can get out of sync with the
hardware state causing cursor to not be programmed correctly.

[How]
Similar to DPP, add a HUBP reset function which is called wherever
HUBP is initialized or powergated.  This function will clear the cursor
position and attribute cache allowing for proper programming when the
HUBP is brought back up.

Cc: Mario Limonciello <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: [email protected]
Reviewed-by: Sung Lee <[email protected]>
Signed-off-by: Aric Cyr <[email protected]>
Signed-off-by: Wayne Lin <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>

Author: AMD-aric

drivers/gpu/drm/amd/display/dc/dpp/dcn10/dcn10_dpp.c

@@ -194,6 +194,9 @@ void dpp_reset(struct dpp *dpp_base)
 	dpp->filter_h = NULL;
 	dpp->filter_v = NULL;
 
+	memset(&dpp_base->pos, 0, sizeof(dpp_base->pos));
+	memset(&dpp_base->att, 0, sizeof(dpp_base->att));
+
 	memset(&dpp->scl_data, 0, sizeof(dpp->scl_data));
 	memset(&dpp->pwl_data, 0, sizeof(dpp->pwl_data));
 }

drivers/gpu/drm/amd/display/dc/hubp/dcn10/dcn10_hubp.c

@@ -546,6 +546,12 @@ void hubp1_dcc_control(struct hubp *hubp, bool enable,
 			SECONDARY_SURFACE_DCC_IND_64B_BLK, dcc_ind_64b_blk);
 }
 
+void hubp_reset(struct hubp *hubp)
+{
+	memset(&hubp->pos, 0, sizeof(hubp->pos));
+	memset(&hubp->att, 0, sizeof(hubp->att));
+}
+
 void hubp1_program_surface_config(
 	struct hubp *hubp,
 	enum surface_pixel_format format,
@@ -1351,8 +1357,9 @@ static void hubp1_wait_pipe_read_start(struct hubp *hubp)
 
 void hubp1_init(struct hubp *hubp)
 {
-	//do nothing
+	hubp_reset(hubp);
 }
+
 static const struct hubp_funcs dcn10_hubp_funcs = {
 	.hubp_program_surface_flip_and_addr =
 			hubp1_program_surface_flip_and_addr,
@@ -1365,6 +1372,7 @@ static const struct hubp_funcs dcn10_hubp_funcs = {
 	.hubp_set_vm_context0_settings = hubp1_set_vm_context0_settings,
 	.set_blank = hubp1_set_blank,
 	.dcc_control = hubp1_dcc_control,
+	.hubp_reset = hubp_reset,
 	.mem_program_viewport = min_set_viewport,
 	.set_hubp_blank_en = hubp1_set_hubp_blank_en,
 	.set_cursor_attributes	= hubp1_cursor_set_attributes,

drivers/gpu/drm/amd/display/dc/hubp/dcn10/dcn10_hubp.h

@@ -746,6 +746,8 @@ void hubp1_dcc_control(struct hubp *hubp,
 		bool enable,
 		enum hubp_ind_block_size independent_64b_blks);
 
+void hubp_reset(struct hubp *hubp);
+
 bool hubp1_program_surface_flip_and_addr(
 	struct hubp *hubp,
 	const struct dc_plane_address *address,

drivers/gpu/drm/amd/display/dc/hubp/dcn20/dcn20_hubp.c

@@ -1674,6 +1674,7 @@ static struct hubp_funcs dcn20_hubp_funcs = {
 	.set_blank = hubp2_set_blank,
 	.set_blank_regs = hubp2_set_blank_regs,
 	.dcc_control = hubp2_dcc_control,
+	.hubp_reset = hubp_reset,
 	.mem_program_viewport = min_set_viewport,
 	.set_cursor_attributes	= hubp2_cursor_set_attributes,
 	.set_cursor_position	= hubp2_cursor_set_position,

drivers/gpu/drm/amd/display/dc/hubp/dcn201/dcn201_hubp.c

@@ -121,6 +121,7 @@ static struct hubp_funcs dcn201_hubp_funcs = {
 	.set_cursor_position	= hubp1_cursor_set_position,
 	.set_blank = hubp1_set_blank,
 	.dcc_control = hubp1_dcc_control,
+	.hubp_reset = hubp_reset,
 	.mem_program_viewport = min_set_viewport,
 	.hubp_clk_cntl = hubp1_clk_cntl,
 	.hubp_vtg_sel = hubp1_vtg_sel,

drivers/gpu/drm/amd/display/dc/hubp/dcn21/dcn21_hubp.c

@@ -811,6 +811,8 @@ static void hubp21_init(struct hubp *hubp)
 	struct dcn21_hubp *hubp21 = TO_DCN21_HUBP(hubp);
 	//hubp[i].HUBPREQ_DEBUG.HUBPREQ_DEBUG[26] = 1;
 	REG_WRITE(HUBPREQ_DEBUG, 1 << 26);
+
+	hubp_reset(hubp);
 }
 static struct hubp_funcs dcn21_hubp_funcs = {
 	.hubp_enable_tripleBuffer = hubp2_enable_triplebuffer,
@@ -823,6 +825,7 @@ static struct hubp_funcs dcn21_hubp_funcs = {
 	.hubp_set_vm_system_aperture_settings = hubp21_set_vm_system_aperture_settings,
 	.set_blank = hubp1_set_blank,
 	.dcc_control = hubp1_dcc_control,
+	.hubp_reset = hubp_reset,
 	.mem_program_viewport = hubp21_set_viewport,
 	.set_cursor_attributes	= hubp2_cursor_set_attributes,
 	.set_cursor_position	= hubp1_cursor_set_position,

drivers/gpu/drm/amd/display/dc/hubp/dcn30/dcn30_hubp.c

@@ -499,6 +499,8 @@ void hubp3_init(struct hubp *hubp)
 	struct dcn20_hubp *hubp2 = TO_DCN20_HUBP(hubp);
 	//hubp[i].HUBPREQ_DEBUG.HUBPREQ_DEBUG[26] = 1;
 	REG_WRITE(HUBPREQ_DEBUG, 1 << 26);
+
+	hubp_reset(hubp);
 }
 
 static struct hubp_funcs dcn30_hubp_funcs = {
@@ -513,6 +515,7 @@ static struct hubp_funcs dcn30_hubp_funcs = {
 	.set_blank = hubp2_set_blank,
 	.set_blank_regs = hubp2_set_blank_regs,
 	.dcc_control = hubp3_dcc_control,
+	.hubp_reset = hubp_reset,
 	.mem_program_viewport = min_set_viewport,
 	.set_cursor_attributes	= hubp2_cursor_set_attributes,
 	.set_cursor_position	= hubp2_cursor_set_position,

drivers/gpu/drm/amd/display/dc/hubp/dcn31/dcn31_hubp.c

@@ -79,6 +79,7 @@ static struct hubp_funcs dcn31_hubp_funcs = {
 	.hubp_set_vm_system_aperture_settings = hubp3_set_vm_system_aperture_settings,
 	.set_blank = hubp2_set_blank,
 	.dcc_control = hubp3_dcc_control,
+	.hubp_reset = hubp_reset,
 	.mem_program_viewport = min_set_viewport,
 	.set_cursor_attributes	= hubp2_cursor_set_attributes,
 	.set_cursor_position	= hubp2_cursor_set_position,

drivers/gpu/drm/amd/display/dc/hubp/dcn32/dcn32_hubp.c

@@ -181,6 +181,7 @@ static struct hubp_funcs dcn32_hubp_funcs = {
 	.set_blank = hubp2_set_blank,
 	.set_blank_regs = hubp2_set_blank_regs,
 	.dcc_control = hubp3_dcc_control,
+	.hubp_reset = hubp_reset,
 	.mem_program_viewport = min_set_viewport,
 	.set_cursor_attributes	= hubp32_cursor_set_attributes,
 	.set_cursor_position	= hubp2_cursor_set_position,

drivers/gpu/drm/amd/display/dc/hubp/dcn35/dcn35_hubp.c

@@ -199,6 +199,7 @@ static struct hubp_funcs dcn35_hubp_funcs = {
 	.hubp_set_vm_system_aperture_settings = hubp3_set_vm_system_aperture_settings,
 	.set_blank = hubp2_set_blank,
 	.dcc_control = hubp3_dcc_control,
+	.hubp_reset = hubp_reset,
 	.mem_program_viewport = min_set_viewport,
 	.set_cursor_attributes	= hubp2_cursor_set_attributes,
 	.set_cursor_position	= hubp2_cursor_set_position,