PCI: Add debug print for device ready delay

Currently, the time it took a PCI device to become ready after reset is
only printed if it was longer than 1000ms ('PCI_RESET_WAIT'). However,
for debugging purposes it is useful to know this time even if it was
shorter. For example, with the device I am working on, hardware
engineers asked to verify that it becomes ready on the first try (no
delay).

To that end, add a debug level print that can be enabled using dynamic
debug. Example:

 # echo 1 > /sys/bus/pci/devices/0000\:01\:00.0/reset
 # dmesg -c | grep ready
 # echo "file drivers/pci/pci.c +p" > /sys/kernel/debug/dynamic_debug/control
 # echo 1 > /sys/bus/pci/devices/0000\:01\:00.0/reset
 # dmesg -c | grep ready
 [  396.060335] mlxsw_spectrum4 0000:01:00.0: ready 0ms after bus reset
 # echo "file drivers/pci/pci.c -p" > /sys/kernel/debug/dynamic_debug/control
 # echo 1 > /sys/bus/pci/devices/0000\:01\:00.0/reset
 # dmesg -c | grep ready

Signed-off-by: Ido Schimmel <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Petr Machata <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

Author: idosch

drivers/pci/pci.c

@@ -1219,6 +1219,9 @@ static int pci_dev_wait(struct pci_dev *dev, char *reset_type, int timeout)
 	if (delay > PCI_RESET_WAIT)
 		pci_info(dev, "ready %dms after %s\n", delay - 1,
 			 reset_type);
+	else
+		pci_dbg(dev, "ready %dms after %s\n", delay - 1,
+			reset_type);
 
 	return 0;
 }