irqchip/meson-gpio: Fix HARDIRQ-safe -> HARDIRQ-unsafe lock order

Running a lockedp-enabled kernel on a vim3l board (Amlogic SM1)
leads to the following splat:

[   13.557138] WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
[   13.587485] ip/456 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
[   13.625922] ffff000059908cf0 (&irq_desc_lock_class){-.-.}-{2:2}, at: __setup_irq+0xf8/0x8d8
[   13.632273] which would create a new lock dependency:
[   13.637272]  (&irq_desc_lock_class){-.-.}-{2:2} -> (&ctl->lock){+.+.}-{2:2}
[   13.644209]
[   13.644209] but this new dependency connects a HARDIRQ-irq-safe lock:
[   13.654122]  (&irq_desc_lock_class){-.-.}-{2:2}
[   13.654125]
[   13.654125] ... which became HARDIRQ-irq-safe at:
[   13.664759]   lock_acquire+0xec/0x368
[   13.666926]   _raw_spin_lock+0x60/0x88
[   13.669979]   handle_fasteoi_irq+0x30/0x178
[   13.674082]   generic_handle_irq+0x38/0x50
[   13.678098]   __handle_domain_irq+0x6c/0xc8
[   13.682209]   gic_handle_irq+0x5c/0xb0
[   13.685872]   el1_irq+0xd0/0x180
[   13.689010]   arch_cpu_idle+0x40/0x220
[   13.692732]   default_idle_call+0x54/0x60
[   13.696677]   do_idle+0x23c/0x2e8
[   13.699903]   cpu_startup_entry+0x30/0x50
[   13.703852]   rest_init+0x1e0/0x2b4
[   13.707301]   arch_call_rest_init+0x18/0x24
[   13.711449]   start_kernel+0x4ec/0x51c
[   13.715167]
[   13.715167] to a HARDIRQ-irq-unsafe lock:
[   13.722426]  (&ctl->lock){+.+.}-{2:2}
[   13.722430]
[   13.722430] ... which became HARDIRQ-irq-unsafe at:
[   13.732319] ...
[   13.732324]   lock_acquire+0xec/0x368
[   13.735985]   _raw_spin_lock+0x60/0x88
[   13.739452]   meson_gpio_irq_domain_alloc+0xcc/0x290
[   13.744392]   irq_domain_alloc_irqs_hierarchy+0x24/0x60
[   13.749586]   __irq_domain_alloc_irqs+0x160/0x2f0
[   13.754254]   irq_create_fwspec_mapping+0x118/0x320
[   13.759073]   irq_create_of_mapping+0x78/0xa0
[   13.763360]   of_irq_get+0x6c/0x80
[   13.766701]   of_mdiobus_register_phy+0x10c/0x238 [of_mdio]
[   13.772227]   of_mdiobus_register+0x158/0x380 [of_mdio]
[   13.777388]   mdio_mux_init+0x180/0x2e8 [mdio_mux]
[   13.782128]   g12a_mdio_mux_probe+0x290/0x398 [mdio_mux_meson_g12a]
[   13.788349]   platform_drv_probe+0x5c/0xb0
[   13.792379]   really_probe+0xe4/0x448
[   13.795979]   driver_probe_device+0xe8/0x140
[   13.800189]   __device_attach_driver+0x94/0x120
[   13.804639]   bus_for_each_drv+0x84/0xd8
[   13.808474]   __device_attach+0xe4/0x168
[   13.812361]   device_initial_probe+0x1c/0x28
[   13.816592]   bus_probe_device+0xa4/0xb0
[   13.820430]   deferred_probe_work_func+0xa8/0x100
[   13.825064]   process_one_work+0x264/0x688
[   13.829088]   worker_thread+0x4c/0x458
[   13.832768]   kthread+0x154/0x158
[   13.836018]   ret_from_fork+0x10/0x18
[   13.839612]
[   13.839612] other info that might help us debug this:
[   13.839612]
[   13.850354]  Possible interrupt unsafe locking scenario:
[   13.850354]
[   13.855720]        CPU0                    CPU1
[   13.858774]        ----                    ----
[   13.863242]   lock(&ctl->lock);
[   13.866330]                                local_irq_disable();
[   13.872233]                                lock(&irq_desc_lock_class);
[   13.878705]                                lock(&ctl->lock);
[   13.884297]   <Interrupt>
[   13.886857]     lock(&irq_desc_lock_class);
[   13.891014]
[   13.891014]  *** DEADLOCK ***

The issue can occur when CPU1 is doing something like irq_set_type()
and CPU0 performing an interrupt allocation, for example. Taking
an interrupt (like the one being reconfigured) would lead to a deadlock.

A solution to this is:

- Reorder the locking so that meson_gpio_irq_update_bits takes the lock
  itself at all times, instead of relying on the caller to lock or not,
  hence making the RMW sequence atomic,

- Rework the critical section in meson_gpio_irq_request_channel to only
  cover the allocation itself, and let the gpio_irq_sel_pin callback
  deal with its own locking if required,

- Take the private spin-lock with interrupts disabled at all times

Reviewed-by: Jerome Brunet <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>

Author: Marc Zyngier

drivers/irqchip/irq-meson-gpio.c

@@ -144,12 +144,17 @@ struct meson_gpio_irq_controller {
 static void meson_gpio_irq_update_bits(struct meson_gpio_irq_controller *ctl,
 				       unsigned int reg, u32 mask, u32 val)
 {
+	unsigned long flags;
 	u32 tmp;
 
+	spin_lock_irqsave(&ctl->lock, flags);
+
 	tmp = readl_relaxed(ctl->base + reg);
 	tmp &= ~mask;
 	tmp |= val;
 	writel_relaxed(tmp, ctl->base + reg);
+
+	spin_unlock_irqrestore(&ctl->lock, flags);
 }
 
 static void meson_gpio_irq_init_dummy(struct meson_gpio_irq_controller *ctl)
@@ -196,21 +201,24 @@ meson_gpio_irq_request_channel(struct meson_gpio_irq_controller *ctl,
 			       unsigned long  hwirq,
 			       u32 **channel_hwirq)
 {
+	unsigned long flags;
 	unsigned int idx;
 
-	spin_lock(&ctl->lock);
+	spin_lock_irqsave(&ctl->lock, flags);
 
 	/* Find a free channel */
 	idx = find_first_zero_bit(ctl->channel_map, NUM_CHANNEL);
 	if (idx >= NUM_CHANNEL) {
-		spin_unlock(&ctl->lock);
+		spin_unlock_irqrestore(&ctl->lock, flags);
 		pr_err("No channel available\n");
 		return -ENOSPC;
 	}
 
 	/* Mark the channel as used */
 	set_bit(idx, ctl->channel_map);
 
+	spin_unlock_irqrestore(&ctl->lock, flags);
+
 	/*
 	 * Setup the mux of the channel to route the signal of the pad
 	 * to the appropriate input of the GIC
@@ -225,8 +233,6 @@ meson_gpio_irq_request_channel(struct meson_gpio_irq_controller *ctl,
 	 */
 	*channel_hwirq = &(ctl->channel_irqs[idx]);
 
-	spin_unlock(&ctl->lock);
-
 	pr_debug("hwirq %lu assigned to channel %d - irq %u\n",
 		 hwirq, idx, **channel_hwirq);
 
@@ -287,13 +293,9 @@ static int meson_gpio_irq_type_setup(struct meson_gpio_irq_controller *ctl,
 			val |= REG_EDGE_POL_LOW(params, idx);
 	}
 
-	spin_lock(&ctl->lock);
-
 	meson_gpio_irq_update_bits(ctl, REG_EDGE_POL,
 				   REG_EDGE_POL_MASK(params, idx), val);
 
-	spin_unlock(&ctl->lock);
-
 	return 0;
 }