usb: typec: ucsi: Check capabilities before cable and identity discovery

Check the UCSI_CAP_GET_PD_MESSAGE bit before sending GET_PD_MESSAGE to
discover partner and cable identity, check UCSI_CAP_CABLE_DETAILS before
sending GET_CABLE_PROPERTY to discover the cable and check
UCSI_CAP_ALT_MODE_DETAILS before registering the a cable plug. Additionally,
move 8 bits from reserved_1 to features in the ucsi_capability struct. This
makes the field 16 bits, still 8 short of the 24 bits allocated for it in
UCSI v3.0, but it will not overflow because UCSI only defines 14 bits in
bmOptionalFeatures.

Fixes: 38ca416 ("usb: typec: ucsi: Register cables based on GET_CABLE_PROPERTY")
Link: https://lore.kernel.org/linux-usb/[email protected]
Suggested-by: Neil Armstrong <[email protected]>
Signed-off-by: Jameson Thies <[email protected]>
Tested-by: Neil Armstrong <[email protected]> # on SM8550-QRD
Reviewed-by: Benson Leung <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

Author: jthiesatgoogle

drivers/usb/typec/ucsi/ucsi.c

@@ -1137,17 +1137,21 @@ static int ucsi_check_cable(struct ucsi_connector *con)
 	if (ret < 0)
 		return ret;
 
-	ret = ucsi_get_cable_identity(con);
-	if (ret < 0)
-		return ret;
+	if (con->ucsi->cap.features & UCSI_CAP_GET_PD_MESSAGE) {
+		ret = ucsi_get_cable_identity(con);
+		if (ret < 0)
+			return ret;
+	}
 
-	ret = ucsi_register_plug(con);
-	if (ret < 0)
-		return ret;
+	if (con->ucsi->cap.features & UCSI_CAP_ALT_MODE_DETAILS) {
+		ret = ucsi_register_plug(con);
+		if (ret < 0)
+			return ret;
 
-	ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_SOP_P);
-	if (ret < 0)
-		return ret;
+		ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_SOP_P);
+		if (ret < 0)
+			return ret;
+	}
 
 	return 0;
 }
@@ -1193,8 +1197,10 @@ static void ucsi_handle_connector_change(struct work_struct *work)
 			ucsi_register_partner(con);
 			ucsi_partner_task(con, ucsi_check_connection, 1, HZ);
 			ucsi_partner_task(con, ucsi_check_connector_capability, 1, HZ);
-			ucsi_partner_task(con, ucsi_get_partner_identity, 1, HZ);
-			ucsi_partner_task(con, ucsi_check_cable, 1, HZ);
+			if (con->ucsi->cap.features & UCSI_CAP_GET_PD_MESSAGE)
+				ucsi_partner_task(con, ucsi_get_partner_identity, 1, HZ);
+			if (con->ucsi->cap.features & UCSI_CAP_CABLE_DETAILS)
+				ucsi_partner_task(con, ucsi_check_cable, 1, HZ);
 
 			if (UCSI_CONSTAT_PWR_OPMODE(con->status.flags) ==
 			    UCSI_CONSTAT_PWR_OPMODE_PD)
@@ -1627,8 +1633,10 @@ static int ucsi_register_port(struct ucsi *ucsi, struct ucsi_connector *con)
 		ucsi_register_partner(con);
 		ucsi_pwr_opmode_change(con);
 		ucsi_port_psy_changed(con);
-		ucsi_get_partner_identity(con);
-		ucsi_check_cable(con);
+		if (con->ucsi->cap.features & UCSI_CAP_GET_PD_MESSAGE)
+			ucsi_get_partner_identity(con);
+		if (con->ucsi->cap.features & UCSI_CAP_CABLE_DETAILS)
+			ucsi_check_cable(con);
 	}
 
 	/* Only notify USB controller if partner supports USB data */

drivers/usb/typec/ucsi/ucsi.h

@@ -206,7 +206,7 @@ struct ucsi_capability {
 #define UCSI_CAP_ATTR_POWER_OTHER		BIT(10)
 #define UCSI_CAP_ATTR_POWER_VBUS		BIT(14)
 	u8 num_connectors;
-	u8 features;
+	u16 features;
 #define UCSI_CAP_SET_UOM			BIT(0)
 #define UCSI_CAP_SET_PDM			BIT(1)
 #define UCSI_CAP_ALT_MODE_DETAILS		BIT(2)
@@ -215,7 +215,8 @@ struct ucsi_capability {
 #define UCSI_CAP_CABLE_DETAILS			BIT(5)
 #define UCSI_CAP_EXT_SUPPLY_NOTIFICATIONS	BIT(6)
 #define UCSI_CAP_PD_RESET			BIT(7)
-	u16 reserved_1;
+#define UCSI_CAP_GET_PD_MESSAGE		BIT(8)
+	u8 reserved_1;
 	u8 num_alt_modes;
 	u8 reserved_2;
 	u16 bc_version;